[ Upstream commit 61e4a86600 ]
Fix two connection reaping bugs:
(1) rxrpc_connection_expiry is in units of seconds, so
rxrpc_disconnect_call() needs to multiply it by HZ when adding it to
jiffies.
(2) rxrpc_client_conn_reap_timeout() should set RXRPC_CLIENT_REAP_TIMER if
local->kill_all_client_conns is clear, not if it is set (in which case
we don't need the timer). Without this, old client connections don't
get cleaned up until the local endpoint is cleaned up.
Fixes: 5040011d07 ("rxrpc: Make the local endpoint hold a ref on a connected call")
Fixes: 0d6bf319bc ("rxrpc: Move the client conn cache management to the I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/783911.1698364174@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19b3f72a41 ]
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.
This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.
syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue.
Fixes: 7be57fc691 ("tipc: add link get/dump to new netlink api")
Fixes: 0655f6a863 ("tipc: add bearer disable/enable to new netlink api")
Reported-and-tested-by: syzbot+5138ca807af9d2b42574@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5138ca807af9d2b42574 [1]
Reported-and-tested-by: syzbot+9425c47dccbcb4c17d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9425c47dccbcb4c17d51 [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030075540.3784537-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b3ba18703 ]
LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.
Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).
BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218
__netif_receive_skb_one_core net/core/dev.c:5523 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
netif_receive_skb_internal net/core/dev.c:5723 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5782
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002
Add a mac_len test before all three eth_hdr(skb) calls under net/llc.
There are further uses in include/net/llc_pdu.h. All these are
protected by a test skb->protocol == ETH_P_802_2. Which does not
protect against this tun scenario.
But the mac_len test added in this patch in llc_fixup_skb will
indirectly protect those too. That is called from llc_rcv before any
other LLC code.
It is tempting to just add a blanket mac_len check in llc_rcv, but
not sure whether that could break valid LLC paths that do not assume
an Ethernet header. 802.2 LLC may be used on top of non-802.3
protocols in principle. The below referenced commit shows that used
to, on top of Token Ring.
At least one of the three eth_hdr uses goes back to before the start
of git history. But the one that syzbot exercises is introduced in
this commit. That commit is old enough (2008), that effectively all
stable kernels should receive this.
Fixes: f83f1768f8 ("[LLC]: skb allocation size for responses")
Reported-by: syzbot+a8c7be6dee0de1b669cc@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231025234251.3796495-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9bc441154 ]
The suspend/resume functions currently utilize
clk_disable()/clk_enable() respectively which may be no-ops with certain
clock providers such as SCMI. Fix this to use clk_disable_unprepare()
and clk_prepare_enable() respectively as we should.
Fixes: 3a9f595702 ("pwm: Add Broadcom BCM7038 PWM controller support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d6812b41e ]
Instead of using one allocation per capture channel, use a single one. Also
store it in driver data instead of chip data.
This has several advantages:
- driver data isn't cleared when pwm_put() is called
- Reduces memory fragmentation
Also register the pwm chip only after the per capture channel data is
initialized as the capture callback relies on this initialization and it
might be called even before pwmchip_add() returns.
It would be still better to have struct sti_pwm_compat_data and the
per-channel data struct sti_cpt_ddata in a single memory chunk, but that's
not easily possible because the number of capture channels isn't known yet
when the driver data struct is allocated.
Fixes: e926b12c61 ("pwm: Clear chip_data in pwm_put()")
Reported-by: George Stark <gnstark@sberdevices.ru>
Fixes: c97267ae83 ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20230705080650.2353391-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e27fbeca ]
'meson' directory contains two separate drivers, so it should be added
to Makefile compilation hierarchy unconditionally, because otherwise the
meson-ao-cec-g12a won't be compiled if meson-ao-cec is not selected.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 4be5e8648b ("media: move CEC platform drivers to a separate directory")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a76e7679b ]
Fix the build warnings that were detected by the linux-media
build scripts tool:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
In function 'mdp_path_config.isra':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
warning: 'ctx' may be used uninitialized [-Wmaybe-uninitialized]
| out = CFG_COMP(MT8195, ctx->param, outputs[0]);
| ~~~^~~~~~~
drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h: note:
in definition of macro 'CFG_COMP'
| (IS_ERR_OR_NULL(comp) ? 0 : _CFG_COMP(plat, comp, mem))
| ^~~~
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
note: 'ctx' was declared here
| struct mdp_comp_ctx *ctx;
|
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b833b17849 ]
After gstreamer rework the dynamic resolution change handling, gstreamer
stop doing capture buffer allocation based on guesses and wait for the
source change event when available. It requires driver always notify
source change event in the initialization, even if the size parsed is
equal to the size set on capture queue. otherwise, the pipeline will be
stalled.
Currently driver may not notify source change event if the parsed format
and size are equal to those previously established, but it may stall the
gstreamer pipeline.
The link of gstreamer patch is
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437
Fixes: b4e1fb8643 ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39377f84fb ]
Mainlined RK3588 clock driver manage by itself the dependency between
aclk/hclk and their root clocks (aclk_vdpu_root/hclk_vdpu_root).
RK3588 av1 video decoder do not have to take care of it anymore so
remove them from the list and be compliant with yaml bindings description.
Fixes: 003afda97c ("media: verisilicon: Enable AV1 decoder on rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31b2cb85f ]
Instead of returning an error, goto the mutex unlock at
the end of the function.
Fixes smatch warning:
drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'.
Locked on : 326,387
Unlocked on: 465,467
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7bf744f2de ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b270171530 ]
The notifier is added to the global notifier list when registered. When
the module is removed, the struct csi2rx_priv in which the notifier is
embedded, is destroyed. As a result the notifier list has a reference to
a notifier that no longer exists. This causes invalid memory accesses
when the list is iterated over. Similar for when the probe fails.
Unregister and clean up the notifier to avoid this.
Fixes: 1fc3b37f34 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fd6eb1264 ]
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Moreover, use kfree() in the later error handling in order to avoid
memory leak.
Fixes: c2f78f0cb2 ("media: vidtv: psi: add a Network Information Table (NIT)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76a2c5df6c ]
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes: 7a7899f6f5 ("media: vidtv: psi: Implement an Event Information Table (EIT)")
Fixes: c2f78f0cb2 ("media: vidtv: psi: add a Network Information Table (NIT)")
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61334819ac ]
s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: babde1c243 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeccc63f3 ]
The driver uses the upper-bound approach to decide the target JPEG
encode quality, but there's a logic bug that if the desired quality is
higher than what the driver can support, the driver falls back to using
the worst quality.
Fix the bug by assuming using the best quality in the beginning, and
with trivial refactor to avoid long lines.
Fixes: 45f13a57d8 ("media: platform: Add jpeg enc feature")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd5b50b329 ]
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv
Fixes: 162e6376ac ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc29e3c9f ]
The value of V4L2_CID_VBLANK control is initialized to default vblank
value of 640x480 when driver probe. When OV5640 work at DVP mode, the
control value won't update and lead to sensor can't output data if the
resolution remain the same as last time since incorrect total vertical
size. So update it when there is a new value applied.
Fixes: bce93b827d ("media: ov5640: Add VBLANK control")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e481d52d3 ]
In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).
The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.
Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.
To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink
Fixes: 79c987de8b ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88d4b23a62 ]
The i.MX8MM/N/P does not define the .reset op since reset of the VPU is
done by genpd. Check whether the .reset op is defined before calling it
to avoid NULL pointer dereference.
Note that the Fixes tag is set to the commit which removed the reset op
from i.MX8M Hantro G2 implementation, this is because before this commit
all the implementations did define the .reset op.
Fixes: 6971efb70a ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c2786632e ]
The last buffer from before the change must be marked,
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
Meanwhile if V4L2_DEC_CMD_STOP is sent before
the source change triggered,
we need to restore the is_draing flag after
the draining in dynamic resolution change.
Fixes: b4e1fb8643 ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e1241049 ]
Afer commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 402ab979b2 ]
As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().
Fixes: 360b65b95b ("[PATCH] pcmcia: make config_t independent, add reference counting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message rewrite]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ea1b4847 ]
If device_register() returns error in pccardd(), it leads two issues:
1. The socket_released has never been completed, it will block
pcmcia_unregister_socket(), because of waiting for completion
of socket_released.
2. The device name allocated by dev_set_name() is leaked.
Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33d9c987bf ]
commit 5d2ffbe4b8 ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
...moved the dport component registers from a raw component_reg_phys
passed in at dport instantiation time to a 'struct cxl_register_map'
populated with both the component register data *and* the "host" device
for mapping operations.
While typical CXL switch dports are mapped by their associated 'struct
cxl_port', an RCH host bridge dport registered by cxl_acpi needs to wait
until the cxl_mem driver makes the attachment to map the registers. This
is because there are no intervening 'struct cxl_port' instances between
the root cxl_port and the endpoint port in an RCH topology.
For now just mark the host as NULL in the RCH dport case until code that
needs to map the dport registers arrives.
This patch is not flagged for -stable since nothing in the current
driver uses the dport->comp_map.
Now, I am slightly uneasy that cxl_setup_comp_regs() sets map->host to a
wrong value and then cxl_dport_setup_regs() fixes it up, but the
alternatives I came up with are more messy. For example, adding an
@logdev to 'struct cxl_register_map' that the dev_printk()s can fall
back to when @host is NULL. I settled on "post-fixup+comment" since it
is only RCH dports that have this special case where register probing is
split between a host-bridge RCRB lookup and when cxl_mem_probe() does
the association of the cxl_memdev and endpoint port.
[moved rename of @comp_map to @reg_map into next patch]
Fixes: 5d2ffbe4b8 ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd22581f89 ]
The primary role of @dev is to host the mappings for devm operations.
@dev is too ambiguous as a name. I.e. when does @dev refer to the
'struct device *' instance that the registers belong, and when does
@dev refer to the 'struct device *' instance hosting the mapping for
devm operations?
Clarify the role of @dev in cxl_register_map by renaming it to @host.
Also, rename local variables to 'host' where map->host is used.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 33d9c987bf ("cxl/port: Fix @host confusion in cxl_dport_setup_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3531b27f1f ]
Fix a missed "goto out" to unlock on error to cleanup this splat:
WARNING: lock held when returning to user space!
6.6.0-rc3-lizhijian+ #213 Not tainted
------------------------------------------------
cxl/673 is leaving the kernel with locks still held!
1 lock held by cxl/673:
#0: ffffffffa013b9d0 (cxl_region_rwsem){++++}-{3:3}, at: commit_store+0x7d/0x3e0 [cxl_core]
In terms of user visible impact of this bug for backports:
cxl_region_invalidate_memregion() on x86 invokes wbinvd which is a
problematic instruction for virtualized environments. So, on virtualized
x86, cxl_region_invalidate_memregion() returns an error. This failure
case got missed because CXL memory-expander device passthrough is not a
production use case, and emulation of CXL devices is typically limited
to kernel development builds with CONFIG_CXL_REGION_INVALIDATION_TEST=y,
that makes cxl_region_invalidate_memregion() succeed.
In other words, the expected exposure of this bug is limited to CXL
subsystem development environments using QEMU that neglected
CONFIG_CXL_REGION_INVALIDATION_TEST=y.
Fixes: d1257d098a ("cxl/region: Move cache invalidation before region teardown, and before setup")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231025085450.2514906-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cf36a85c1 ]
For auto-discovered regions the driver must assign each target to
a valid position in the region interleave set based on the decoder
topology.
The current implementation fails to parse valid decode topologies,
as it does not consider the child offset into a parent port. The sort
put all targets of one port ahead of another port when an interleave
was expected, causing the region assembly to fail.
Replace the existing relative sort with cxl_calc_interleave_pos() that
finds the exact position in a region interleave for an endpoint based
on a walk up the ancestral tree from endpoint to root decoder.
cxl_calc_interleave_pos() was introduced in a prior patch, so the work
here is to use it in cxl_region_sort_targets().
Remove the obsoleted helper functions from the prior sort.
Testing passes on pre-production hardware with BIOS defined regions
that natively trigger this autodiscovery path of the region driver.
Testing passes a CXL unit test using the dev_dbg() calculation test
(see cxl_region_attach()) across an expanded set of region configs:
1, 1, 1+1, 1+1+1, 2, 2+2, 2+2+2, 2+2+2+2, 4, 4+4, where each number
represents the count of endpoints per host bridge.
Fixes: a32320b71f ("cxl/region: Add region autodiscovery")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/3946cc55ddc19678733eddc9de2c317749f43f3b.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3e00c964f ]
Introduce a calculation to find a target's position in a region
interleave. Perform a self-test of the calculation on user-defined
regions.
The region driver uses the kernel sort() function to put region
targets in relative order. Positions are assigned based on each
target's index in that sorted list. That relative sort doesn't
consider the offset of a port into its parent port which causes
some auto-discovered regions to fail creation. In one failure case,
a 2 + 2 config (2 host bridges each with 2 endpoints), the sort
puts all the targets of one port ahead of another port when they
were expected to be interleaved.
In preparation for repairing the autodiscovery region assembly,
introduce a new method for discovering a target position in the
region interleave.
cxl_calc_interleave_pos() adds a method to find the target position by
ascending from an endpoint to a root decoder. The calculation starts
with the endpoint's local position and position in the parent port. It
traverses towards the root decoder and examines both position and ways
in order to allow the position to be refined all the way to the root
decoder.
This calculation: position = position * parent_ways + parent_pos;
applied iteratively yields the correct position.
Include a self-test that exercises this new position calculation against
every successfully configured user-defined region.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/0ac32c75cf81dd8b86bf07d70ff139d33c2300bc.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 0cf36a85c1 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1110581412 ]
match_decoder_by_range() and decoder_match_range() both determine
if an HPA range matches a decoder. The first does it for root
decoders and the second one operates on switch decoders.
Tidy these up with clear naming and make the switch helper more
like the root decoder helper in style and functionality. Make it
take the actual range, rather than an endpoint decoder from which
it extracts the range. Require an exact match on switch decoders,
because unlike a root decoder that maps an entire region, Linux
only supports 1:1 mapping of switch to endpoint decoders. Note that
root-decoders are a super-set of switch-decoders and the range they
cover is a super-set of a region, hence the use of range_contains() for
that case.
Aside from aesthetics and maintainability, this is in preparation
for reuse.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/011b1f498e1758bb8df17c5951be00bd8d489e3b.1698263080.git.alison.schofield@intel.com
[djbw: fixup root decoder vs switch decoder range checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 0cf36a85c1 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db10cb9b57 ]
CONFIG_DEBUG_SG highlights that get_{report,ext_report,derived_key)()}
are passing stack buffers as the @req_buf argument to
handle_guest_request(), generating a Call Trace of the following form:
WARNING: CPU: 0 PID: 1175 at include/linux/scatterlist.h:187 enc_dec_message+0x518/0x5b0 [sev_guest]
[..]
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:enc_dec_message+0x518/0x5b0 [sev_guest]
Call Trace:
<TASK>
[..]
handle_guest_request+0x135/0x520 [sev_guest]
get_ext_report+0x1ec/0x3e0 [sev_guest]
snp_guest_ioctl+0x157/0x200 [sev_guest]
Note that the above Call Trace was with the DEBUG_SG BUG_ON()s converted
to WARN_ON()s.
This is benign as long as there are no hardware crypto accelerators
loaded for the aead cipher, and no subsequent dma_map_sg() is performed
on the scatterlist. However, sev-guest can not assume the presence of
an aead accelerator nor can it assume that CONFIG_DEBUG_SG is disabled.
Resolve this bug by allocating virt_addr_valid() memory, similar to the
other buffers am @snp_dev instance carries, to marshal requests from
user buffers to kernel buffers.
Reported-by: Peter Gonda <pgonda@google.com>
Closes: http://lore.kernel.org/r/CAMkAt6r2VPPMZ__SQfJse8qWsUyYW3AgYbOUVM0S_Vtk=KvkxQ@mail.gmail.com
Fixes: fce96cf044 ("virt: Add SEV-SNP guest driver")
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
