mark qedr_get_state_from_ibqp(), __qedr_alloc_mr() and __qedr_post_send()
as static since they are only used in the same file.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fail QP state transition from error to reset if SQ/RQ are not empty
and still in the process of flushing out the queued work entries.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It is normal to flush CQEs if the QP is in error state. Hence there's no
use in printing a message per CQE to dmesg.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is only a single event queue that triggers the completion
events for the RDMA CM and it is being processed serially. This means
that inherently there can no parallelism of CQ completion handler
callbacks, hence the lock is redundant.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return the maximum supported amount of inline data, not the qp's current
configured inline data size, when filling out the results of a query
qp call.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the user is requesting us to change the QP state to the same state
that it is already in, return success instead of failure.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As the functionality to convert the MTU from a number to enum_ib_mtu
is ubiquitous, define a dedicated function and remove the duplicated
code.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Endpoints that are aborting can have already dereferenced the
cm_id and set ep->com.cm_id to NULL. So guard against that in
dump_ep() and dump_qp().
Also create a common function for setting up ip address pointers
since the same logic is needed in several places.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the interrupt allocation failed we should start freeing the CQ rings
rather than unregistering the netdev notifier.
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For some mlx5 HW models (CX4, CX4Lx), the VF driver needs to put part
of the packet headers on the TX descriptor so the e-switch can do proper
matching and steering. This is called "min-inline", it's advertized to
the VF by the FW and also enforced on them by the HW, such that if they
don't obey, their packets are dropped.
SRIOV VF libmlx5 instances should take into account the min-inline
value of their vports. For that end, we provide this value through
the vendor response part of init_ucontext command.
The min inline value is reported in a way which will let newer libmlx5
instances realize that they are running over an older kernel and act
accordingly (e.g apply some educated guess).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add code in ib_register_device() for copying the DMA masks. Use
&ib_device.dev in DMA mapping operations instead of dma_device.
Remove ib_device.dma_device because due to this and previous patches
it is no longer used.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since a later patch will remove ib_device.dma_device and since knowing
the value of that pointer is not too important, remove dma_device from
the debug output.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the ib_device.dev.parent initialization code from
ib_device_register_sysfs() to ib_register_device(). Additionally,
allow HBA drivers to set ib_device.dev.parent without setting
ib_device.dma_device. This is the first step towards removing
ib_device.dma_device.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For devices that can register page list that is bigger than
USHRT_MAX, we actually take the wrong value for sg_tablesize.
E.g: for CX4 max_fast_reg_page_list_len is 65536 (bigger than USHRT_MAX)
so we set sg_tablesize to 0 by mistake. Therefore, each IO that is
bigger than 4k splitted to "< 4k" chunks that cause performance degredation.
Remove wrong sg_tablesize assignment, and use the value that was set during
address resolution handler with the needed casting.
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
After setting indirect_sg_entries module_param to huge value (e.g 500,000),
srp_alloc_req_data() fails to allocate indirect descriptors for the request
ring (kmalloc fails). This commit enforces the maximum value of
indirect_sg_entries to be SG_MAX_SEGMENTS as signified in module param
description.
Fixes: 65e8617fba (scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS)
Fixes: c07d424d61 (IB/srp: add support for indirect tables that don't fit in SRP_CMD)
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>
When we try to resolve a dest addr, if we don't give src addr,
cma core will try to resolve to our source ib device automatically.
The current logic only checks if a given port has the same
subnet_prefix as our dest, which is not enough if we use default
well known subnet_prefix on our active port, as it will be the same
as the subnet_prefix on inactive ports and we might match against
an inactive port by accident. To resolve this, we should also check
if port is active before we resolve it as a suitable src address for
a given dest.
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Michael Wang <yun.wang@profitbricks.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
