Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.10 (take 2)
The usual mixed bag from towards the end of the cycle.
Changes since take 1. Fixed the fixes tag and indeed fixed a rebase I
messed up on the same fix.
New devices support
===================
invensense,icm42600
- Support the ICM-42686-P a high range device going up to 32g and 4000 dps
New features
============
adi,ad7944
- Add support for chain mode in which many ADCs may be daisy chained and
read out via a single long read.
adi,ad9467/backend library
- Add bus tuning related interfaces.
adi,axi-adc
- Add control for the AXI clock - seems always enabled early in boot for other
reasons, but the driver should not rely on that..
Cleanups and minor or late breaking fixes
=========================================
Micrsoft/ACPI mount matrix handling.
- Replace several implementations of the Microsoft defined ROTM ACPI
method with a single one.
multiple drivers
- Don't call the result of wait_for_completion() timeout as it's
more accurate as time_left.
adi,ad7266
- Stop setting the iio_dev->masklength as it's done by the IIO core and
should not be set from drivers.
adi,ad799x
- Some checkpatch type fixes.
adi,ad9839
- Ensure compelte MU_CNT1 is written during lock phase.
adi,axi-dac
- Fix inverted parameter.
adi,adis16475
- Drop documentation of non existent sysfs files.
avago,apds9306
- Fix an off by one error that overly restricts the range of persistence
and adaptive thresholds that the driver accepts.
freescale,mxs-lradc
- Stop setting the iio_dev->masklength as it's done by the IIO core and
should not be set from drivers.
invensense,timestamp library
- Fix timestamp vs interupt alignment and aovid soms glitches that
occured when switching sampling frequency.
microchip,mcp3564
- Make use of device_for_each_child_node_scoped() to allow early release
without manual fwnode_handle_put().
microchip,mcp9600
- Allow for negative temperatures.
microchip,pac1934
- Avoid an out of bounds array index.
richtek,rtq6056
- Use iio_device_claim_direct_scoped() to automate lock release and simplify
the code.
sensortek,stk3110
- Drop a likely incorrect ACPI ID. No known users of this ID and it's
not a valid ACPI ID.
ti,ads1015
- Make use of device_for_each_child_node_scoped() to allow early release
without manual fwnode_handle_put().
* tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits)
iio: temperature: mcp9600: Fix temperature reading for negative values
iio: adc: PAC1934: fix accessing out of bounds array index
iio: invensense: fix timestamp glitches when switching frequency
iio: invensense: fix interrupt timestamp alignment
iio: dac: ad9739a: write complete MU_CNT1 register during lock
iio: pressure: zpa2326: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: twl6030-gpadc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: stm32-dfsdm-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: stm32-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: intel_mrfld_adc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: fsl-imx25-gcq: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: exynos_adc: use 'time_left' variable with wait_for_completion_timeout()
iio: adc: ad_sigma_delta: use 'time_left' variable with wait_for_completion_timeout()
iio: adc: ti-ads1015: use device_for_each_child_node_scoped()
iio: adc: ad799x: Prefer to use octal permission
iio: adc: ad799x: add blank line to avoid warning messages
iio: adc: ad799x: change 'unsigned' to 'unsigned int' declaration
iio: adc: mcp3564: Use device_for_each_child_node_scoped()
iio: adc: ad9467: support digital interface calibration
iio: adc: adi-axi-adc: support digital interface calibration
...
Define "clock-<freq>" as the preferred node name for fixed-clock and
fixed-factor-clock where <freq> is the output frequency of the clock.
There isn't much of an existing pattern for names of these nodes. The
most frequent patterns are a prefix or suffix of "clk", but there's a
bunch that don't follow any sort of pattern. We could use
"clock-controller-.*", but these nodes aren't really a controller in any
way. So let's at least align with part of that and use 'clock-'.
For now this only serves as documentation as the schema still allows
anything to avoid lots of additional warnings for something low priority
to fix. Once a "no deprecated" mode is added to the tools, warnings can
be enabled selectively.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240430180415.657067-1-robh@kernel.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull sound fixes from Takashi Iwai:
"As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition, recent
emu10k1 regression fixes and usual HD-audio quirks are included"
* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: hda/realtek: Fix build error without CONFIG_PM
ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
ASoC: cs35l56: fix usages of device_get_named_child_node()
ASoC: da7219-aad: fix usage of device_get_named_child_node()
ASoC: meson: cards: select SND_DYNAMIC_MINORS
ASoC: meson: axg-tdm: add continuous clock support
ASoC: meson: axg-tdm-interface: manage formatters in trigger
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-fifo: use threaded irq to check periods
ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
ALSA: emu10k1: fix E-MU dock initialization
ALSA: emu10k1: use mutex for E-MU FPGA access locking
ALSA: emu10k1: move the whole GPIO event handling to the workqueue
ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
ALSA: emu10k1: fix E-MU card dock presence monitoring
ASoC: rt715-sdca: volume step modification
...
Arm SMMU updates for 6.10
- SMMUv2:
* Support for fault debugging hardware on Qualcomm implementations
* Re-land support for the ->domain_alloc_paging() callback
- SMMUv3:
* Improve handling of MSI allocation failure
* Drop support for the "disable_bypass" cmdline option
* Major rework of the CD creation code, following on directly from the
STE rework merged last time around.
* Add unit tests for the new STE/CD manipulation logic
- RZ/G2UL and RZ/Five ("r9a07g043")
- RZ/G2L(C) ("r9a07g044")
- RZ/V2L ("r9a07g054")
- RZ/G3S ("r9a08g045")
- RZ/V2M ("r9a09g011")
The SD/MMC Interface in the above listed SoCs is not identical to that of
R-Car Gen3. These SoCs have HS400 disabled and use fixed address mode.
Therefore, we need to apply fixed_addr_mode and hs400_disabled quirks.
Document 'renesas,rzg2l-sdhi' as a generic compatible string for the
above SoCs.
Also now use the 'renesas,rzg2l-sdhi' string in the if check for making
sure the required clocks are present.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240430145937.133643-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ath.git patches for v6.10
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
Some properties (function groups & pins) are meant to be arrays and
should allow multiple entries out of enum sets. Use "items" for those.
Mistake was noticed during validation of in-kernel DTS files.
Fixes: b9ffc18c63 ("dt-bindings: mediatek: convert pinctrl to yaml")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Suzuki writes:
coresight: hwtracing subsystem updates for v6.10
CoreSight/hwtracing updates for the next release includes:
- ACPI power management support for CoreSight legacy components, via migration
from AMBA to platform device
- Fixes for ETE register save/restore during CPU Idle.
- ACPI support TMC for Scatter-Gather mode.
- his_ptt driver update to set the parent device for PMU and documentation fixes
- Qcomm Trace component DT binding fixes
- Miscellaneous cleanups
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (28 commits)
hwtracing: hisi_ptt: Assign parent for event_source device
Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source
coresight: tmc: Enable SG capability on ACPI based SoC-400 TMC ETR devices
coresight: Docs/ABI/testing/sysfs-bus-coresight-devices: Fix spelling errors
coresight: tpiu: Convert to platform remove callback returning void
coresight: tmc: Convert to platform remove callback returning void
coresight: stm: Convert to platform remove callback returning void
coresight: debug: Convert to platform remove callback returning void
coresight: catu: Convert to platform remove callback returning void
coresight: Remove duplicate linux/amba/bus.h header
coresight: stm: Remove duplicate linux/acpi.h header
coresight: etm4x: Fix access to resource selector registers
coresight: etm4x: Safe access for TRCQCLTR
coresight: etm4x: Do not save/restore Data trace control registers
coresight: etm4x: Do not hardcode IOMEM access for register restore
coresight: debug: Move ACPI support from AMBA driver to platform driver
coresight: stm: Move ACPI support from AMBA driver to platform driver
coresight: tmc: Move ACPI support from AMBA driver to platform driver
coresight: tpiu: Move ACPI support from AMBA driver to platform driver
coresight: catu: Move ACPI support from AMBA driver to platform driver
...
Convert txt binding of TI's qspi controller (found on their omap SoCs) to
dtschema to allow for validation.
The changes, w.r.t. the original txt binding, are:
- Introduce "clocks" and "clock-names" which was never mentioned.
- Reflect that "ti,hwmods" is deprecated and is not a "required"
property anymore.
- Introduce "num-cs" which allows for setting the number of chip
selects.
- Drop "qspi_ctrlmod".
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240501165203.13763-1-five231003@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Running dtbs_check and dt_compatible_check targets really only depend
on processed-schema.json, but the dependency is 'dt_binding_check'. That
was sort worked around with the CHECK_DT_BINDING variable in order to
skip some of the work that 'dt_binding_check' does. It still runs the
full checks of the schemas which is not necessary and adds 10s of
seconds to the build time. That's significant when checking only a few
DTBs and with recent changes that have improved the validation time by
6-7x.
Add a new target, dt_binding_schema, which just builds
processed-schema.json and can be used as the dependency for other
targets. The scripts_dtc dependency isn't needed either as the examples
aren't built for it.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Strict priority for the tx scheduler is by default in Linux driver, so the
tx-sched-sp property was removed in commit aed6864035 ("net: stmmac:
platform: Delete a redundant condition branch").
This property is still in use in the following DT (and it will be removed
in a separate patch series):
- arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
- arch/arm64/boot/dts/freescale/imx8mp-evk.dts
- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
- arch/arm64/boot/dts/qcom/sa8540p-ride.dts
- arch/arm64/boot/dts/qcom/sa8775p-ride.dts
There is no problem if that property is still used in the DTs above,
since, as seen above, it is a default property of the driver.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240429092654.31390-2-f.suligoi@asem.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
