The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.
The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.
This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.
The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.
Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com
Use the pm_ptr() macro to handle the .suspend / .resume / .reset_resume
callbacks.
This macro allows the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch. It also allows to drop the
__maybe_unused tags.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-11-paul@crapouillou.net
Implement MIPI DBI planes with struct drm_shadow_plane_state, so that the
respective drivers can use the vmap'ed GEM-buffer memory. Implement state
helpers, the {begin,end}_fb_access helpers and wire up everything.
With this commit, MIPI DBI drivers can access the GEM object's memory
that is provided by shadow-plane state. The actual changes to drivers
are implemented separately.
v2:
* use shadow-plane state directly (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-7-tzimmermann@suse.de
Move the vmap/vunmap blocks from the inner fb_dirty helpers into the
MIPI DBI update helpers. The function calls can result in waiting and/or
processing overhead. Reduce the penalties by executing the functions once
in the outer-most function of the pipe update.
This change also prepares for MIPI DBI for shadow-plane helpers. With
shadow-plane helpers, transfer source buffers are mapped into kernel
address space automatically.
v2:
* keep each driver's existing buffer-mapping patter (Noralf)
* zero-initialize iosys_map arrays (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-6-tzimmermann@suse.de
The helper drm_gem_simple_display_pipe_prepare_fb() is simple-KMS'
default implementation for prepare_fb. Remove the call from drivers
that set it explicitly. Then inline the helper into the only caller
within simple-kms helpers. No functional changes.
Simple-KMS drivers that implement the prepare_fb callback should call
drm_gem_plane_helper_prepare_fb() directly.
v2:
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-2-tzimmermann@suse.de
Set the preferred depth from the format of the scanout buffer. The
value cannot be hardcoded, as the scanout buffer is only known at
runtime. Keeping the existing switch statement just duplicates the
driver's existing logic for format detection.
Also remove the FIXME comment from the call to drm_fbdev_generic_setup()
as the driver now handles color depth and bpp values correctly.
v2:
* fix commit-message typo
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-5-tzimmermann@suse.de
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
Cast error pointers when returning them as void __iomem *. Fixes
a number of Sparse warnings, such as the ones shown below.
../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void *
See [1] for the bug report.
v3:
* use IOMEM_ERR_PTR() (Javier)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
Properties of 32-bit integers are returned from the OF device tree
as type __be32. Convert PCI vendor and device IDs from __be32 to host
endianness before comparing them to constants. All relevant machines
are old, big-endian Macintosh systems; hence the bug never happened
in practice.
Fixes sparse warnings shown below.
drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer
drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer
drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer
See [1] for the bug report.
v2:
* convert endianness (Alex)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de
The fb_base in struct drm_mode_config has been unused for a long time.
Some drivers set it and some don't leading to a very confusing state
where the variable can't be relied upon, because there's no indication
as to which driver sets it and which doesn't.
The only usage of fb_base is internal to two drivers so instead of trying
to force it into all the drivers to get it into a coherent state
completely remove it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
Support the CRTC's color-management property and implement each model's
palette support.
The OF hardware has different methods of setting the palette. The
respective code has been taken from fbdev's offb and refactored into
per-model device functions. The device functions integrate this
functionality into the overall modesetting.
As palette handling is a CRTC property that depends on the primary
plane's color format, the plane's atomic_check helper now updates the
format field in ofdrm's custom CRTC state. The CRTC's atomic_flush
helper updates the palette for the format as needed.
v4:
* use cpu_to_be32() (Geert)
v3:
* lookup CRTC state with drm_atomic_get_new_crtc_state()
* access HW palette with writeb(), writel(), and readl() (Ben)
* declare register values as u32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
Open Firmware provides basic display output via the 'display' node.
DT platform code already provides a device that represents the node's
framebuffer. Add a DRM driver for the device. The display mode and
color format is pre-initialized by the system's firmware. Runtime
modesetting via DRM is not possible. The display is useful during
early boot stages or as error fallback.
Similar functionality is already provided by fbdev's offb driver,
which is insufficient for modern userspace. The old driver includes
support for BootX device tree, which can be found on old 32-bit
PowerPC Macintosh systems. If these are still in use, the
functionality can be added to ofdrm or implemented in a new
driver. As with simpledrm, the fbdev driver cannot be selected if
ofdrm is already enabled.
Two notable points about the driver:
* Reading the framebuffer aperture from the device tree is not
reliable on all systems. Ofdrm takes the heuristics and a comment
from offb to pick the correct range.
* No resource management may be tied to the underlying PCI device.
Otherwise the handover to the native driver will fail with a resource
conflict. PCI management is therefore done as part of the platform
device's cleanup.
The driver has been tested on qemu's ppc64le emulation. The device
hand-over has been tested with bochs.
v5:
* use drm_atomic_helper_check_crtc_primary_plane()
v4:
* set preferred depth to the correct value
* set bpp value for console emulation
* output scanout-buffer parameters with drm_dbg()
v3:
* reintegrate FWFB helpers into ofdrm
* use damage iterator
* sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access()
* fix various atomic_check helpers
* remove CRTC atomic_{enable,disable} (Javier)
* compute stride with drm_format_info_min_pitch() (Daniel)
v2:
* removed simple-pipe helpers
* built driver on top of FWFB helpers
* merged all init code into single function
* make PCI support optional (Michal)
* support COMPILE_TEST (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
convert
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from simpledrm.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in simpledrm. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-3-javierm@redhat.com
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
Provides a default plane state check handler for primary planes that are a
fullscreen scanout buffer and whose state scale and position can't change.
There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a plane helper and
make drivers use it.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913162307.121503-1-javierm@redhat.com
Add drm_fb_build_fourcc_list() function that builds a list of supported
formats from native and emulated ones. Helpful for all drivers that do
format conversion as part of their plane updates. Update current caller.
v3:
* improve warnings on ignored formats (Sam)
v2:
* use u32 instead of uint32_t (Sam)
* print a warning if output array is too small (Sam)
* comment fixes (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-5-tzimmermann@suse.de
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.
Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too). Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.
Fixes: 250e743915 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.
v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de
Provide drm_fb_blit() that works with struct iosys_map. Update all
users of drm_fb_blit_toio(), which required a destination buffer in
I/O memory.
This patch only updates the function's interface. The implementation
still relies on the destination buffer to be located in I/O memory.
See the follow-up patches for implementational changes. The new
function's interface works with multi-plane color formats, but again
implementation only supports a single plane for now.
v2:
* rebase onto refactored simpledrm
* use IOSYS_MAP_INIT_VADDR() (Sam)
* update the commit message on the use of I/O memory (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-3-tzimmermann@suse.de
Replace the simple-KMS helpers with the regular atomic helpers. The
regular helpers are better architectured and therefore allow for easier
code sharing among drivers. No functional changes.
v3:
* remove empty CRTC helpers atomic_{enable, disable} (Javier)
* unconditionally run drm_atomic_helper_check_plane_state()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-6-tzimmermann@suse.de
Inline the helpers for initializing the hardware FB, the memory
management and the modesetting into the device-creation function.
No functional changes.
In the original code, init helpers depended on values from other
init helpers. Inlining the functions ensures that steps are taken
in the correct order. It's also easier to see what happens. The
device is simple enough to be set up in one function. Only clocks
and regulators are still set up in their own helpers, as their
presence is system dependent.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-3-tzimmermann@suse.de
