The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430084921.33387-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with
[ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133
[ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[ 0.605362] Call trace:
[ 0.605365] show_stack+0x18/0x2c
[ 0.605374] dump_stack_lvl+0x60/0x80
[ 0.605383] dump_stack+0x18/0x24
[ 0.605388] sysfs_warn_dup+0x64/0x80
[ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4
[ 0.605402] internal_create_group+0x268/0x404
[ 0.605409] sysfs_create_groups+0x38/0x94
[ 0.605415] devm_device_add_groups+0x50/0x94
[ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0
[ 0.605682] nvmem_register+0x38c/0x470
[ 0.605789] devm_nvmem_register+0x1c/0x6c
[ 0.605895] apple_efuses_probe+0xe4/0x120
[ 0.606000] platform_probe+0xa8/0xd0
As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.
Fixes: 0331c61194 ("nvmem: core: Expose cells through sysfs")
Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156
Cc: <regressions@lists.linux.dev>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Rafał Miłecki <rafal@milecki.pl>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <asahi@lists.linux.dev>
Cc: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
1. Prefer kzalloc() over kcalloc()
See memory-allocation.rst which says: "to be on the safe side it's
best to use routines that set memory to zero, like kzalloc()"
2. Drop dev_err() for u_boot_env_add_cells() fail
It can fail only on -ENOMEM. We don't want to print error then.
3. Add extra "crc32_addr" variable
It makes code reading header's crc32 easier to understand / review.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-5-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simply pass whole "struct nvmem_layout" instead of single variables.
There is nothing in "struct nvmem_layout" that we have to hide from
layout drivers. They also access it during .probe() and .remove().
Thanks to this change:
1. API gets more consistent
All layouts drivers callbacks get the same argument
2. Layouts get correct device
Before this change NVMEM core code was passing NVMEM device instead
of layout device. That resulted in:
* Confusing prints
* Calling devm_*() helpers on wrong device
* Helpers like of_device_get_match_data() dereferencing NULLs
3. It gets possible to get match data
First of all nvmem_layout_get_match_data() requires passing "struct
nvmem_layout" which .add_cells() callback didn't have before this. It
doesn't matter much as it's rather useless now anyway (and will be
dropped).
What's more important however is that of_device_get_match_data() can
be used now thanks to owning a proper device pointer.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231219120104.3422-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On STM32MP25, OTP area may be read/written by using BSEC (boot, security
and OTP control). The BSEC internal peripheral is only managed by the
secure world.
The 12 Kbits of OTP (effective) are organized into the following regions:
- lower OTP (OTP0 to OTP127) = 4096 lower OTP bits,
bitwise (1-bit) programmable
- mid OTP (OTP128 to OTP255) = 4096 middle OTP bits,
bulk (32-bit) programmable
- upper OTP (OTP256 to OTP383) = 4096 upper OTP bits,
bulk (32-bit) programmable,
only accessible when BSEC is in closed state.
As HWKEY and ECIES key are only accessible by ROM code;
only 368 OTP words are managed in this driver (OTP0 to OTP267).
This patch adds the STM32MP25 configuration for reading and writing
the OTP data using the OP-TEE BSEC TA services.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The binary content of nvmem devices is available to the user so in the
easiest cases, finding the content of a cell is rather easy as it is
just a matter of looking at a known and fixed offset. However, nvmem
layouts have been recently introduced to cope with more advanced
situations, where the offset and size of the cells is not known in
advance or is dynamic. When using layouts, more advanced parsers are
used by the kernel in order to give direct access to the content of each
cell, regardless of its position/size in the underlying
device. Unfortunately, these information are not accessible by users,
unless by fully re-implementing the parser logic in userland.
Let's expose the cells and their content through sysfs to avoid these
situations. Of course the relevant NVMEM sysfs Kconfig option must be
enabled for this support to be available.
Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
group member will be filled at runtime only when relevant and will
remain empty otherwise. In this case, as the cells attribute group will
be empty, it will not lead to any additional folder/file creation.
Exposed cells are read-only. There is, in practice, everything in the
core to support a write path, but as I don't see any need for that, I
prefer to keep the interface simple (and probably safer). The interface
is documented as being in the "testing" state which means we can later
add a write attribute if though relevant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current layout support was initially written without modules support in
mind. When the requirement for module support rose, the existing base
was improved to adopt modularization support, but kind of a design flaw
was introduced. With the existing implementation, when a storage device
registers into NVMEM, the core tries to hook a layout (if any) and
populates its cells immediately. This means, if the hardware description
expects a layout to be hooked up, but no driver was provided for that,
the storage medium will fail to probe and try later from
scratch. Even if we consider that the hardware description shall be
correct, we could still probe the storage device (especially if it
contains the rootfs).
One way to overcome this situation is to consider the layouts as
devices, and leverage the native notifier mechanism. When a new NVMEM
device is registered, we can populate its nvmem-layout child, if any,
and wait for the matching to be done in order to get the cells (the
waiting can be easily done with the NVMEM notifiers). If the layout
driver is compiled as a module, it should automatically be loaded. This
way, there is no strong order to enforce, any NVMEM device creation
or NVMEM layout driver insertion will be observed as a new event which
may lead to the creation of additional cells, without disturbing the
probes with costly (and sometimes endless) deferrals.
In order to achieve that goal we create a new bus for the nvmem-layouts
with minimal logic to match nvmem-layout devices with nvmem-layout
drivers. All this infrastructure code is created in the layouts.c file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem-consumer.h is included by consumer devices, extracting data from
NVMEM devices whereas nvmem-provider.h is included by devices providing
NVMEM content.
The only users of of_nvmem_layout_get_container() outside of the core
are layout drivers, so better move its prototype to nvmem-provider.h.
While we do so, we also move the kdoc associated with the function to
the header rather than the .c file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111536.316972-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
This reverts commit 517f14d9cf.
Config option "no_of_node" is no longer needed since adding a more
explicit and targeted option "add_legacy_fixed_of_cells".
That "no_of_node" config option was needed *earlier* to help mtd's case.
DT nodes of MTD partitions (that are also NVMEM devices) may contain
subnodes. Those SHOULD NOT be treated as NVMEM fixed cells.
To prevent NVMEM core code from parsing subnodes a "no_of_node" option
was added (and set to true in mtd) to make for_each_child_of_node() in
NVMEM a no-op. That was a bit hacky because it was messing with
"of_node" pointer to achieve some side-effect.
With the introduction of "add_legacy_fixed_of_cells" config option
things got more explicit. MTD subsystem simply tells NVMEM when to look
for fixed cells and there is no need to hack "of_node" pointer anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231023102759.31529-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes
has been deprecated. It has been replaced by the "fixed-layout" NVMEM
layout binding.
New syntax is meant to be clearer and should help avoiding imprecise
bindings.
NVMEM subsystem already supports the new binding. It should be a good
idea to limit support for old syntax to existing drivers that actually
support & use it (we can't break backward compatibility!). That way we
additionally encourage new bindings & drivers to ignore deprecated
binding.
It wasn't clear (to me) if rtc and w1 code actually uses old syntax
fixed cells. I enabled them to don't risk any breakage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[for meson-{efuse,mx-efuse}.c]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[for mtk-efuse.c, nvmem/core.c, nvmem-provider.h]
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[MT8192, MT8195 Chromebooks]
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[for microchip-otpc.c]
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[SAMA7G5-EK]
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230823132744.350618-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
