Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit 1e5907bcb3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825142226.80929-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825142226.80929-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/tas2562.c:530:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/tas2562.c:525:6: note: If condition 'ret' is true, the function will return/exit
if (ret)
^
sound/soc/codecs/tas2562.c:530:9: note: Returning identical expression 'ret'
return ret;
^
Fix with return 0
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/tas2562.c:805:34: warning: ‘tas2562_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-31-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the TAS2110 amplifier to the TAS2562 driver. The TAS2110 is register
and bitmap compatible. The chips differ in that the TAS2110 does not
have the I/V Sense feedback path. Since these features do not exist the
device needs to be registered without these controls.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200921153820.18357-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/873661xxhu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Vsense slot configuration based on the device tree. Adding this
property enables the slot programming to be moved to the tdm_set_slot
callback. This in affect sets the slots for the Isense and Vsense and
enabling this these modes are now based on whether these features were
powered on or not.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200626154143.20351-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for digital volume control. There is no dedicated register
for volume control but instead there are 4. The values of the registers
are determined with exponential floating point math.
So a table was created with register values for 2dB step increments
from -110dB to 0dB.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221124151.8774-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add additional support for ISENSE and VSENSE feature for the TAS2562.
This feature monitors the output to the loud speaker attempts to
eliminate IR drop errors due to packaging.
This feature is defined in Section 8.4.5 IV Sense of the data sheet.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200219134622.22066-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
