Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
The axis-fifo driver performs a full hardware reset (via
reset_ip_core()) in several error paths within the read and write
functions. This reset flushes both TX and RX FIFOs and resets the
AXI-Stream links.
Allow the user to handle the error without causing hardware disruption
or data loss in other FIFO paths.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Link: https://lore.kernel.org/r/20250419004306.669605-1-gshahrouzi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove erroneous subtraction of 4 from the total FIFO depth read from
device tree. The stored depth is for checking against total capacity,
not initial vacancy. This prevented writes near the FIFO's full size.
The check performed just before data transfer, which uses live reads of
the TDFV register to determine current vacancy, correctly handles the
initial Depth - 4 hardware state and subsequent FIFO fullness.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Link: https://lore.kernel.org/r/20250419012937.674924-1-gshahrouzi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and updates for
6.15-rc1.
As expected, with the introduction of the gpib drivers, loads of
cleanups and fixes showed up, with the huge majority of changes being
for that chunk of drivers. This is good and shows that the community
can fix up things in public when asked to. Also included in here are:
- small sm750fb cleanups
- tiny rtl8723bs cleanups
- more vchiq_arm cleanups and changes, hopefully this will get out of
staging soon
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (76 commits)
staging: rtl8723bs: fixed a unnecessary parentheses coding style issue
staging: vchiq_arm: Improve initial VCHIQ connect
staging: vchiq_arm: Create keep-alive thread during probe
staging: vchiq_arm: Stop kthreads if vchiq cdev register fails
staging: vchiq_arm: Fix possible NPR of keep-alive thread
staging: vchiq_arm: Register debugfs after cdev
staging: vchiq_arm: Don't use %pK through printk
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_AES
staging: rtl8723bs: Remove some unused functions, macros, and structs
staging: gpib: change return type of t1_delay function to report errors
staging: gpib: remove commented-out lines
staging: gpib: fix kernel-doc section for usb_gpib_line_status() function
staging: gpib: fix kernel-doc section for function usb_gpib_interface_clear()
staging: gpib: fix kernel-doc section for write_loop() function
staging: gpib: Removing typedef for gpib_board
staging: gpib: struct typing for gpib_gboard_t
staging: gpib: tnt4882: struct gpib_board
staging: gpib: tms9914: struct gpib_board
staging: gpib: pc2: struct gpib_board
staging: gpib: ni_usb_gpib: struct gpib_board
...
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
Creating the keep-alive thread in vchiq_platform_init_state have
the following advantages:
- abort driver probe if kthread_create fails (more consistent behavior)
- make resource release process easier
Since vchiq_keepalive_thread_func is defined below
vchiq_platform_init_state, the latter must be moved.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-5-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case vchiq_platform_conn_state_changed() is never called or fails before
driver removal, ka_thread won't be a valid pointer to a task_struct. So
do the necessary checks before calling kthread_stop to avoid a crash.
Fixes: 863a756aaf ("staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unload")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code returns "unsigned int" and it doesn't handle errors
correctly if it happens during ioctl call for t1 delay configuration.
The ni_usb_t1_delay(), from NI, is the only function returning -1
at this point. The caller, t1_delay_ioctl(), doesn't check for errors
and sets board->t1_nano_sec to -1 and returns success.
The board->t1_nano_sec value is also used in ni_usb_setup_t1_delay()
besides the ioctl call and a value of -1 is treated as being above 1100ns.
It may or may not have a noticeable effect, but it's obviously not right
considering the content of ni_usb_setup_t1_delay().
Typical delays are in the 200-2000 range, but definitely not more
than INT_MAX so we can fix this code by changing the return type to int
and adding a check for errors. While we're at it, lets change the error
code in ni_usb_t1_delay() from -1 and instead propagate the error from
ni_usb_write_registers().
Fixes: 4e127de14f ("staging: gpib: Add National Instruments USB GPIB driver")
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Link: https://lore.kernel.org/r/20250225014811.77995-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function name field in the kernel-doc section for the
usb_gpib_line_status() is defined as 'line_status'. In addition, after
the kernel-doc section, there are three macro definition instead of the
function definition.
These issues trigger the warning:
warning: expecting prototype for line_status(). Prototype was for WQT()
instead.
Fix the warning by renaming the function in the kernel-doc section and
by moving the macros to the beginning of the file with the rest of
macros definition.
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/20250305193614.39604-7-gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a colon character in the kernel-doc section of write_loop() in order
'leng' to be picked as argument by the kernel-doc compiler.
This change fix the following warning:
warning: Function parameter or struct member 'leng' not described in
'send_command'
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/20250305193614.39604-3-gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the agilent usb dongle is disconnected subsequent calls to the
driver cause a NULL dereference Oops as the bus_interface
is set to NULL on disconnect.
This problem was introduced by setting usb_dev from the bus_interface
for dev_xxx messages.
Previously bus_interface was checked for NULL only in the functions
directly calling usb_fill_bulk_urb or usb_control_msg.
Check for valid bus_interface on all interface entry points
and return -ENODEV if it is NULL.
Fixes: fbae7090f3 ("staging: gpib: Update messaging and usb_device refs in agilent_usb")
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250222204515.5104-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
