Currently, the test result does not differentiate between the cases when
either one of the address families are configured or if both the address
families are configured. Ideally, the result should report if a
particular case was skipped.
./drivers/net/ping.py
TAP version 13
1..7
ok 1 ping.test_default_v4 # SKIP Test requires IPv4 connectivity
ok 2 ping.test_default_v6
ok 3 ping.test_xdp_generic_sb
ok 4 ping.test_xdp_generic_mb
ok 5 ping.test_xdp_native_sb
ok 6 ping.test_xdp_native_mb
ok 7 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:2 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a system with either of the ipv4 or ipv6 information missing, tests
are currently skipped. Ideally, the test should run as long as at least
one address family is present. This patch make test run whenever
possible.
Before:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default
ok 2 ping.test_xdp_generic_sb
ok 3 ping.test_xdp_generic_mb
ok 4 ping.test_xdp_native_sb
ok 5 ping.test_xdp_native_mb
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:1 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250503013518.1722913-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The `get_interface_info` call has ip version hard-coded which leads to
failures on an IPV6 system. The NetDrvEnv class already gathers
information about remote interface, so instead of fixing the local
implementation switch to using cfg.remote_ifname.
Before:
./drivers/net/ping.py
Traceback (most recent call last):
File "/new_tests/./drivers/net/ping.py", line 217, in <module>
main()
File "/new_tests/./drivers/net/ping.py", line 204, in main
get_interface_info(cfg)
File "/new_tests/./drivers/net/ping.py", line 128, in get_interface_info
raise KsftFailEx('Can not get remote interface')
net.lib.py.ksft.KsftFailEx: Can not get remote interface
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a forwarding path test for tc-taprio, based on isochron. This is
specifically intended for NICs with an offloaded data path (switchdev/DSA)
and requires taprio 'flags 2'. Also, $h1 and $h2 must support hardware
timestamping, and $h1 tc-etf offload, for isochron to work.
Packets received by a switch while the egress port has a taprio schedule
with an open gate for the traffic class must be sent right away.
Packets received by the switch while the traffic class gate must be
delayed until it opens.
Packets received by the switch must be dropped if the gate for the
traffic class never opens.
Packets should pass if the maximum SDU for the traffic class allows it,
and should be dropped otherwise.
The schedule should auto-update itself if clock jumps take place while
taprio is installed. Repeat most of the above tests after forcing two
clock jumps, one backwards (in Jan 1970) and one back into the present.
Symlink it from tools/testing/selftests/drivers/net/dsa, because usually
DSA ports have the same MAC address, and we need STABLE_MAC_ADDRS=yes
from its forwarding.config for the test to run successfully.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allowing the
window size to be customized by isochron_do().
From man isochron-send, the window size alters the advance time (the
delta between the transmission time of the packet, and its expected TX
time when using SO_TXTIME or tc-taprio on the sender). In absence of the
argument, isochron-send defaults to maximizing the advance time (making
it equal to the cycle length).
The default behavior is exactly what is problematic. An advance time
that is too large will make packets intended to be out-of-band still be
potentially in-band with an open gate from the schedule's previous cycle.
We need to allow that advance time to be reduced.
Perhaps a bit confusingly, isochron_do() has a shift_time argument
currently, but that does not help here. The shift time shifts both the
user space wakeup time and the expected TX time by equal amounts, it is
unable of bringing them closer to one another.
Set the window size properly for the Ocelot PSFP selftest as well.
That used to work due to a very carefully chosen SHIFT_TIME_NS.
I've re-tested that the test still works properly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For bnxt when the agg ring is used then tcp-data-split is automatically
reported to be enabled, but __net_mp_open_rxq() requires tcp-data-split
to be explicitly enabled by the user.
Enable tcp-data-split explicitly in io_uring zc rx selftest.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250409163153.2747918-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hds.py has been testing 0(set_hds_thresh_zero()),
MAX(set_hds_thresh_max()), GT(set_hds_thresh_gt()) values for hds-thresh.
However if a hds-thresh value was already 0, set_hds_thresh_zero()
can't test properly.
So, it tests random value first and then tests 0, MAX, GT values.
Testing bnxt:
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by
the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_random
ok 6 hds.set_hds_thresh_zero
ok 7 hds.set_hds_thresh_max
ok 8 hds.set_hds_thresh_gt
ok 9 hds.set_xdp
ok 10 hds.enabled_set_xdp
ok 11 hds.ioctl
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Testing lo:
TAP version 13
1..13
ok 1 hds.get_hds # SKIP tcp-data-split not supported by device
ok 2 hds.get_hds_thresh # SKIP hds-thresh not supported by device
ok 3 hds.set_hds_disable # SKIP ring-set not supported by the device
ok 4 hds.set_hds_enable # SKIP ring-set not supported by the device
ok 5 hds.set_hds_thresh_random # SKIP hds-thresh not supported by
device
ok 6 hds.set_hds_thresh_zero # SKIP ring-set not supported by the
device
ok 7 hds.set_hds_thresh_max # SKIP hds-thresh not supported by
device
ok 8 hds.set_hds_thresh_gt # SKIP hds-thresh not supported by device
ok 9 hds.set_xdp # SKIP tcp-data-split not supported by device
ok 10 hds.enabled_set_xdp # SKIP tcp-data-split not supported by
device
ok 11 hds.ioctl # SKIP tcp-data-split not supported by device
ok 12 hds.ioctl_set_xdp # SKIP tcp-data-split not supported by
device
ok 13 hds.ioctl_enabled_set_xdp # SKIP tcp-data-split not supported
by device
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:13 error:0
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Pull io_uring zero-copy receive support from Jens Axboe:
"This adds support for zero-copy receive with io_uring, enabling fast
bulk receive of data directly into application memory, rather than
needing to copy the data out of kernel memory.
While this version only supports host memory as that was the initial
target, other memory types are planned as well, with notably GPU
memory coming next.
This work depends on some networking components which were queued up
on the networking side, but have now landed in your tree.
This is the work of Pavel Begunkov and David Wei. From the v14 posting:
'We configure a page pool that a driver uses to fill a hw rx queue
to hand out user pages instead of kernel pages. Any data that ends
up hitting this hw rx queue will thus be dma'd into userspace
memory directly, without needing to be bounced through kernel
memory. 'Reading' data out of a socket instead becomes a
_notification_ mechanism, where the kernel tells userspace where
the data is. The overall approach is similar to the devmem TCP
proposal
This relies on hw header/data split, flow steering and RSS to
ensure packet headers remain in kernel memory and only desired
flows hit a hw rx queue configured for zero copy. Configuring this
is outside of the scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is
that io_uring is used for the uAPI and the lifetime of all objects
are bound to an io_uring instance. Data is 'read' using a new
io_uring request type. When done, data is returned via a new shared
refill queue. A zero copy page pool refills a hw rx queue from this
refill queue directly. Of course, the lifetime of these data
buffers are managed by io_uring rather than the networking stack,
with different refcounting rules.
This patchset is the first step adding basic zero copy support. We
will extend this iteratively with new features e.g. dynamically
allocated zero copy areas, THP support, dmabuf support, improved
copy fallback, general optimisations and more'
In a local setup, I was able to saturate a 200G link with a single CPU
core, and at netdev conf 0x19 earlier this month, Jamal reported
188Gbit of bandwidth using a single core (no HT, including soft-irq).
Safe to say the efficiency is there, as bigger links would be needed
to find the per-core limit, and it's considerably more efficient and
faster than the existing devmem solution"
* tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux:
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the recent merge between net-next and net, I got some conflicts on
my side because the merge resolution was different from Stephen's one
[1] I applied on my side in the MPTCP tree.
It looks like the code that is now in net-next is using the old way to
retrieve the local and remote addresses. This patch is now using the new
way, like what was in Stephen's email [1].
Also, in get_interface_info(), there were no conflicts in this area,
because that was new code from 'net', but a small adaptation was needed
there as well to get the remote address.
Fixes: 941defcea7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Link: https://lore.kernel.org/20250311115758.17a1d414@canb.auug.org.au [1]
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250314-net-next-drv-net-ping-fix-merge-v1-1-0d5c19daf707@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ping.py has 3 cases, test_v4, test_v6 and test_tcp.
But these cases are not executed on the XDP environment.
So, it adds XDP environment, existing tests(test_v4, test_v6, and
test_tcp) are executed too on the below XDP environment.
So, it adds XDP cases.
1. xdp-generic + single-buffer
2. xdp-generic + multi-buffer
3. xdp-native + single-buffer
4. xdp-native + multi-buffer
5. xdp-offload
It also makes test_{v4 | v6 | tcp} sending large size packets. this may
help to check whether multi-buffer is working or not.
Note that the physical interface may be down and then up when xdp is
attached or detached.
This takes some period to activate traffic. So sleep(10) is
added if the test interface is the physical interface.
netdevsim and veth type interfaces skip sleep.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 29b036be1b ("selftests: drv-net: test XDP, HDS auto and
the ioctl path") added a new test case in the net tree, now that
this code has made its way to net-next convert it to use the env.rpath()
helper instead of manually computing the relative path.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250228212956.25399-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test coverage for the netconsole task name feature to the existing
sysdata selftest script. This extends the test infrastructure to verify
that task names are correctly appended when enabled and absent when
disabled.
The test validates that:
- Task names appear in the expected format "taskname=<name>"
- Task names are included when the feature is enabled
- Task names are excluded when the feature is disabled
- The feature works correctly alongside other sysdata fields like CPU
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Python lib based tests report that they are producing
"KTAP version 1", but really we aren't making use of any
KTAP features, like subtests. Our output is plain TAP.
Report TAP 13 instead of KTAP 1, this is what mptcp tests do,
and what NIPA knows how to parse best. For HW testing we need
precise subtest result tracking.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250228180007.83325-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test XDP and HDS interaction. While at it add a test for using the IOCTL,
as that turned out to be the real culprit.
Testing bnxt:
# NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
and netdevsim:
# ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Netdevsim needs a sane default for tx/rx ring size.
ethtool 6.11 is needed for the --disable-netlink option.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We use wait_port_listen() extensively to wait for a process
we spawned to be ready. Not all processes will open listening
sockets. Add a method of explicitly waiting for a child to
be ready. Pass a FD to the spawned process and wait for it
to write a message to us. FD number is passed via KSFT_READY_FD
env variable.
Similarly use KSFT_WAIT_FD to let the child process for a sign
that we are done and child should exit. Sending a signal to
a child with shell=True can get tricky.
Make use of this method in the queues test to make it less flaky.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a simple test for TSO. Send a few MB of data and check device
stats to verify that the device was performing segmentation.
Do the same thing over a few tunnel types.
Injecting GSO packets directly would give us more ability to test
corner cases, but perhaps starting simple is good enough?
# ./ksft-net-drv/drivers/net/hw/tso.py
# Detected qstat for LSO wire-packets
KTAP version 1
1..14
ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity
ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity
ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity
ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity
ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity
ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity
ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity
ok 8 tso.ipv6
ok 9 tso.vxlan4_ipv6
ok 10 tso.vxlan6_ipv6
ok 11 tso.vxlan_csum4_ipv6
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre4_ipv6
ok 14 tso.gre6_ipv6
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0
Note that the test currently depends on the driver reporting
the LSO count via qstat, which appears to be relatively rare
(virtio, cisco/enic, sfc/efc; but virtio needs host support).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for io_uring zero copy Rx. This test cannot run locally
and requires a remote host to be configured in net.config. The remote
host must have hardware support for zero copy Rx as listed in the
documentation page. The test will restore the NIC config back to before
the test and is idempotent.
liburing is required to compile the test and be installed on the remote
host running the test.
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250215000947.789731-12-dw@davidwei.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest to verify that the netconsole module correctly
handles CPU runtime data in sysdata. The test validates three scenarios:
1. Basic CPU sysdata functionality - verifies that cpu=X is appended to
messages
2. CPU sysdata with userdata - ensures CPU data works alongside userdata
3. Disabled CPU sysdata - confirms no CPU data is included when disabled
The test uses taskset to control which CPU sends messages and verifies
the reported CPU matches the one used. This helps ensure that netconsole
accurately tracks and reports the originating CPU of messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
