Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
mvebu dt for 6.11 (part 1)
armada-385: Add 7-segment LED display on x530
armada-385: Add Turris Omnia MCU related node
armada-370 irqchip DT changes: Drop #size-cells from mpic node
orion / kirkwood: few cleanups
* tag 'mvebu-dt-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Add GPIO key node for front button
ARM: dts: turris-omnia: Add MCU system-controller node
ARM: dts: marvell: orion: align LED node name with bindings
ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs
ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys
ARM: dts: marvell: orion: align GPIO keys node name with bindings
ARM: dts: marvell: kirkwood: align LED node name with bindings
ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys
ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings
ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic node
ARM: dts: marvell: Add 7-segment LED display on x530
Link: https://lore.kernel.org/r/87zfqvixn4.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.11, round 1
Highlights:
----------
-MCU:
- Add syscfg missing clock on stm32f429.
- MPU:
- STM32MP13:
- Add camera support on stm32mp135f-dk bord using DCMIPP and
GC2145 sensor.
- Document PWM output for stm32mp135f-dk
- Add goodix touchscreen support on stm32mp135f-dk board.
- Add new DH DHCOR / DHSBC board (Som + carrier board) based on
STM32MP135F SoC.
SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
eMMC/SDIO wifi module.
The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
and an extansion connector.
- Add Ethernet controller support on stm32mp135f-dk.
It uses LAN8742A PHY based on RMII.
- STMP32MP15:
- Rework Octavo OSD32MP1 split for USB phy.
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- STM32MP25:
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- Enable firewall for RCC.
- Add all U(s)ART nodes for stm32mp25.
- Add 3 power domains for low power modes.
- Add HPDMA support.
- Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
It uses Realtek PHY based on RGMII.
- Add and enable SCMI regulator support.
* tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm64: dts: st: describe power supplies for stm32mp257f-ev1 board
arm64: dts: st: add scmi regulators on stm32mp25
regulator: Add STM32MP25 regulator bindings
ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files
arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board
arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25
arm64: dts: st: add HPDMA nodes on stm32mp251
ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: order stm32mp13-pinctrl nodes
ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk
ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards
ARM: dts: stm32: Missing clocks for stm32f429's syscfg.
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board
ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board
dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: osd32: move pwr_regulators to common
...
Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v6.11
This introduces new support for the Sony Xperia Z3 Compact, HTC One
(M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and
Samsung Galaxy Note 3 devices.
The Motorola Moto G and Motorola Moto G 4G gains accelerometer and
magnetometer support, with the latter also getting framebuffer supplies
and a temperature sensor wired up.
The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as
this is used for USB state changes.
The operating mode for SDC regulator is set to HPM on Sony Xperia
"Shinano" family to avoid brownouts on uSD-cards.
The panel on LGE Nexus 5 is connected to the backlight, to make this
turn off on blanking.
MSM8974 is transitioned to use the mailbox-abstraction for invoking
PC interrupts on remote processors.
* tag 'qcom-arm32-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (24 commits)
ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree
ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROM
ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer supplies
ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor
ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator
ARM: dts: qcom: msm8974: Use mboxes in smsm node
ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2
ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
ARM: dts: qcom: use generic node names for Adreno and QFPROM
ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer
ARM: dts: qcom: Add initial support for HTC One (M8)
ARM: dts: qcom: msm8974: Use mboxes properties for APCS
ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCC
ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCC
ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCC
ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon
ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name
...
Link: https://lore.kernel.org/r/20240705032926.13333-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner SoC device tree changes for 6.11
This includes a commit shared with the clk tree. This commit adds clock
and reset indices to the device tree binding, and thus is needed for
both the device tree and driver changes.
ARM64 device tree and binding-only changes
- Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC
- Add cache information for A64, H6, and H616 SoCs
- Correct model names and descriptions for Pine64 boards
- Add GPADC (general purpose ADC) for H616 SoC
- Add ADC joysticks based on GPADC for anbernic-rg35xx-h board
- Add additional CPU OPPs for the H700 on top of existing H616 ones
- Enable DVFS for rg35xx boards
- Add IOMMU for H616 SoC
RISC-V device tree changes
- Add system LDOs to D1s/T113 SoC
- Add ClockworkPi and DevTerm device trees
* tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees
riscv: dts: allwinner: d1s-t113: Add system LDOs
arm64: dts: allwinner: h616: add IOMMU node
arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling
arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks
arm64: dts: allwinner: h616: Add GPADC device node
dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
ARM: dts: sunxi: remove duplicated entries in makefile
arm64: dts: allwinner: Add cache information to the SoC dtsi for H616
arm64: dts: allwinner: Add cache information to the SoC dtsi for A64
arm64: dts: allwinner: Correct the model names for Pine64 boards
dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards
arm64: dts: allwinner: Add cache information to the SoC dtsi for H6
ARM: dts: sun50i: Add LRADC node
dt-bindings: input: sun4i-lradc-keys: Add H616 compatible
Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor improvements in ARM DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM
LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov).
2. VT8500: align node names with bindings (USB, panel timings).
3. Cirrus: align node names with bindings (panel timings).
4. TI Nspire: correct unit addresses, correct watchdog compatible and
properties while making it disabled (never tested).
5. Nuvoton, Aspeed: align node names with bindings (I2C).
IMPORTANT: At least for Aspeed it is known to affect some user-space
tools, because that user-space looks for specific node path via
/sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI
and any user-space relying on it:
- Prevents any changes in DTS, e.g. node renaming or moving,
changing unit addresses (re-arranging child bus addressing).
- Is using undocumented interface.
- Is neither reliable nor understandable.
6. TI OMAP and Davinci: align node names with bindings (panel timings),
drop incorrect property.
7. STI: document in bindings codec child to fix dtbs_checks.
* tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detection
dt-bindings: soc: sti: st,sti-syscon: document codec node
ARM: dts: ti: align panel timings node name with dtschema
arm: dts: aspeed: Use standard 'i2c' bus node name
arm: dts: nuvoton: Use standard 'i2c' bus node name
MAINTAINERS: ARM: alphascale: add Krzysztof Kozlowski as maintainer
ARM: dts: nspire: Add full compatible for watchdog node
ARM: dts: nspire: Add unit name addresses to memory nodes
MAINTAINERS: ARM: nspire: add Krzysztof Kozlowski as maintainer
MAINTAINERS: ARM: vt8500: add Alexey and Krzysztof as maintainers
MAINTAINERS: ARM: axm: add Krzysztof Kozlowski as maintainer
MAINTAINERS: ARM: moxa: add Krzysztof Kozlowski as maintainer
ARM: dts: cirrus: align panel timings node name with dtschema
ARM: dts: vt8500: align panel timings node name with dtschema
ARM: dts: vt8500: replace "uhci" nodename with generic name "usb"
Link: https://lore.kernel.org/r/20240702065359.7378-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that we have the MCU device-tree node, which acts as a GPIO
controller, add GPIO key node for the front button.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turris Omnia's MCU provides various features that can be configured over
I2C at address 0x2a. Add device-tree node.
This does not carry a Fixes tag - we do not want this to get backported
to stable kernels for the following reason: U-Boot since v2022.10
inserts a phy-reset-gpio property into the WAN ethernet node pointing to
the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu
compatible. Thus if this change got backported to a stable kernel, the
WAN interface driver would defer probe indefinitely (since it would wait
for the turris-omnia-mcu driver which would not be present).
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
stm32mp13-pinctrl.dtsi contains nearly all pinctrl groups collected from
all boards. Most of them end up unused by a board and only waste binary
space. Add /omit-if-no-ref/ to the groups to scrub the unused groups
from the dtbs.
Use the following regex to update the file and drop two useless newlines too:
s@^\t[^:]\+: [^ ]\+ {$@\t/omit-if-no-ref/\r&@
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board.
This carrier board is populated with two gigabit ethernet ports and two
Realtek RTL8211F PHYs, both are described in this DT patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Ethernet1: RMII with crystal
Ethernet2: RMII with no cristal, need "phy-supply" property to work,
today this property was managed by Ethernet glue, but should be present
and managed in PHY node. So I will push second Ethernet in next step.
PHYs used are SMSC (LAN8742A)
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
ethernet1: RMII with crystal.
ethernet2: RMII without crystal.
Add analog gpio pin configuration ("sleep") to manage power mode on
stm32mp13.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To simplify identifying the pins where the PWM output is routed to,
add a comment to each PWM device about the respective pin on the
expansion connector.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The 'gpio' property in GPIO LEDs is deprecated, as reported by
dtbs_check:
orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warnings:
orion5x-lacie-ethernet-disk-mini-v2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:
orion5x-lacie-d2-network.dtb: gpio-keys: 'front_button', 'power_rocker_sw_off', 'power_rocker_sw_on' do not match any of the regexes: '^(button|event|key|switch| ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
kirkwood-ds409slim.dtb: gpio-leds-alarm-12: 'hdd1-green' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warnings:
kirkwood-openblocks_a7.dtb: gpio_keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:
kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The marvell,mpic interrupt controller has no children nodes. Drop the
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The Allied Telesis x530 products have a 7-segment LED display which is
used for node identification when the devices are stacked. Represent
this as a gpio-7-segment device.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Without clock definition, SYSCFG will not work, EXTI interrupt for
port other than GPIOA will fail to operate.
Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This stm32mp135f-dhcor-dhsbc board is a stack of DHCOR SoM based on
STM32MP135F SoC (900MHz / crypto capabilities) populated on DHSBC
carrier board.
The SoM contains the following peripherals:
- STPMIC (power delivery)
- 512MB DDR3L memory
- eMMC and SDIO WiFi module
The DHSBC carrier board contains the following peripherals:
- Two RGMII Ethernet ports
- USB-A Host port, USB-C peripheral port, USB-C power supply plug
- Expansion connector
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22
as the fallback compatible string. There are fewer users of the
Realtek PHY compatible string with fallback compatible string than
there are users without fallback compatible string, so drop the
fallback compatible string from the few remaining users:
$ git grep -ho ethernet-phy-id001c....... | sort | uniq -c
1 ethernet-phy-id001c.c816",
2 ethernet-phy-id001c.c915",
2 ethernet-phy-id001c.c915";
5 ethernet-phy-id001c.c916",
13 ethernet-phy-id001c.c916";
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406290316.YvZdvLxu-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240630034910.173552-1-marex@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Turris Omnia's MCU provides various features that can be configured over
I2C at address 0x2a. Add device-tree node.
This does not carry a Fixes tag - we do not want this to get backported
to stable kernels for the following reason: U-Boot since v2022.10
inserts a phy-reset-gpio property into the WAN ethernet node pointing to
the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu
compatible. Thus if this change got backported to a stable kernel, the
WAN interface driver would defer probe indefinitely (since it would wait
for the turris-omnia-mcu driver which would not be present).
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Apart from the regular dts fixes for wrong addresses, missing
or wrong properties, this reverts the previous move away from
cd-gpios to the mmc-controller's internal card-detect.
With this change applied, it was reported that boards could not
detect card anymore, so this go reverted of course.
* tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add sound-dai-cells for RK3368
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B
arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E
arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A
Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes"
ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node
arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru
arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger
arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s
arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s
arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names
arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More attention for the rk3128 soc (dsi, i2c, spdif, sfc), hdmi-sound
for a rk3066a board and some minor cleanups.
* tag 'v6.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add #sound-dai-cells to hdmi node on rk3128
ARM: dts: rockchip: add #sound-dai-cells to hdmi node no rk3036
ARM: dts: rockchip: enable hdmi_sound and i2s0 for mk808 hdmi
ARM: dts: rockchip: Add SFC for RK3128
ARM: dts: rockchip: add hdmi-sound node to rk3066a
ARM: dts: rockchip: Add spdif node for RK3128
ARM: dts: rockchip: Add i2s nodes for RK3128
ARM: dts: rockchip: Add DSI for RK3128
ARM: dts: rockchip: Add D-PHY for RK3128
dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
Link: https://lore.kernel.org/r/2187283.irdbgypaU6@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a 'thermal-zones' node for stih418.
A thermal-zone needs three components:
- thermal sensors, described in an earlier commit[1]
- cooling devices, specified for each CPU
- a thermal zone, describing the overall behavior.
The thermal zone needs references to both CPUs and thermal sensors,
which phandle are also added. The thermal management will then be
achieved on CPUs using the cpufreq framework.
[1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
