If we have a subpage range like this for a 16K page with 4K sectorsize:
0 4K 8K 12K 16K
|/////| |//////| |
|/////| = dirty range
Currently writepage_delalloc() would go through the following steps:
- lock range [0, 4K)
- run delalloc range for [0, 4K)
- lock range [8K, 12K)
- run delalloc range for [8K 12K)
So far it's fine for regular subpage writeback, as
btrfs_run_delalloc_range() can only go into one of run_delalloc_nocow(),
cow_file_range() and run_delalloc_compressed().
But there is a special case for zoned subpage, where we will go
through run_delalloc_cow(), which would create the ordered extent for the
range and immediately submit the range.
This would unlock the whole page range, causing all kinds of different
ASSERT()s related to locked page.
Address the page unlocking problem of run_delalloc_cow(), by changing
the workflow to the following one:
- lock range [0, 4K)
- lock range [8K, 12K)
- run delalloc range for [0, 4K)
- run delalloc range for [8K, 12K)
So that run_delalloc_cow() can only unlock the full page until the
last lock user released.
To do that:
- Utilize subpage locked bitmap
So for every delalloc range we found, call
btrfs_folio_set_writer_lock() to populate the subpage locked bitmap,
and later btrfs_folio_end_all_writers() if the page is fully unlocked.
So we know there is a delalloc range that needs to be run later.
- Save the @delalloc_end as @last_delalloc_end inside writepage_delalloc()
Since subpage locked bitmap is only for ranges inside the page,
meanwhile we can have delalloc range ends beyond our page boundary,
we have to save the @last_delalloc_end just in case it's beyond our
page boundary.
Although there is one extra point to notice:
- We need to handle errors in previous iteration
Since we can have multiple locked delalloc ranges we have to call
run_delalloc_ranges() multiple times.
If we hit an error half way, we still need to unlock the remaining
ranges.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Three new helpers are introduced for the incoming subpage delalloc locking
change.
- btrfs_folio_set_writer_lock()
This is to mark specified range with subpage specific writer lock.
After calling this, the subpage range can be proper unlocked by
btrfs_folio_end_writer_lock()
- btrfs_subpage_find_writer_locked()
This is to find the writer locked subpage range in a page.
With the help of btrfs_folio_set_writer_lock(), it can allow us to
record and find previously locked subpage range without extra memory
allocation.
- btrfs_folio_end_all_writers()
This is for the locked_page of __extent_writepage(), as there may be
multiple subpage delalloc ranges locked.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function __extent_writepage_io() is designed to find all dirty ranges of
a page, and add the dirty ranges to the bio_ctrl for submission.
It requires all the dirtied ranges to be covered by an ordered extent.
It gets called in two locations, but one call site is not subpage aware:
- __extent_writepage()
It gets called when writepage_delalloc() returned 0, which means
writepage_delalloc() has handled delalloc for all subpage sectors
inside the page.
So this call site is OK.
- extent_write_locked_range()
This call site is utilized by zoned support, and in this case, we may
only run delalloc range for a subset of the page, like this: (64K page
size)
0 16K 32K 48K 64K
|/////| |///////| |
In the above case, if extent_write_locked_range() is only triggered for
range [0, 16K), __extent_writepage_io() would still try to submit
the dirty range of [32K, 48K), then it would not find any ordered
extent for it and triggers various ASSERT()s.
Fix this problem by:
- Introducing @start and @len parameters to specify the range
For the first call site, we just pass the whole page, and the behavior
is not touched, since run_delalloc_range() for the page should have
created all ordered extents for the page.
For the second call site, we avoid touching anything beyond the
range, thus avoiding the dirty range which is not yet covered by any
delalloc range.
- Making btrfs_folio_assert_not_dirty() subpage aware
The only caller is inside __extent_writepage_io(), and since that
caller now accepts a subpage range, we should also check the subpage
range other than the whole page.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/btrfs/btrfs.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the variable 'err', reuse the variable 'ret' by reinitializing it to
zero where necessary.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix coding style: rename the return variable to 'ret' in the function
btrfs_recover_relocation instead of 'err'.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A preparatory patch to rename 'err' to 'ret', but ret is already used as an
intermediary return value, so first rename 'ret' to 'ret2'.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the function btrfs_recover_relocation(), currently the variable 'err'
carries the return value and 'ret' holds the intermediary return value.
However, in some lines, we don't need this two-step approach; we can
directly use 'err'. So, optimize them, which requires reinitializing 'err'
to zero at two locations.
This is a preparatory patch to fix the code style by renaming 'err'
to 'ret'.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since err represents the function return value, rename it as ret,
and rename the original ret, which serves as a helper return value,
to found. Also, optimize the code to continue call btrfs_put_root()
for the rest of the root if even after btrfs_orphan_cleanup() returns
error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following 3 parameters can be cleaned up using btrfs_file_extent
structure:
- len
btrfs_file_extent::num_bytes
- orig_block_len
btrfs_file_extent::disk_num_bytes
- ram_bytes
btrfs_file_extent::ram_bytes
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most parameters of create_io_em() can be replaced by the members with
the same name inside btrfs_file_extent.
Do a direct parameters cleanup here.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All parameters after @filepos of btrfs_alloc_ordered_extent() can be
replaced with btrfs_file_extent structure.
This patch does the cleanup, meanwhile some points to note:
- Move btrfs_file_extent structure to ordered-data.h
The structure is needed by both btrfs_alloc_ordered_extent() and
can_nocow_extent(), but since btrfs_inode.h includes
ordered-data.h, so we need to move the structure to ordered-data.h.
- Move the special handling of NOCOW/PREALLOC into
btrfs_alloc_ordered_extent()
This is to allow btrfs_split_ordered_extent() to properly split them
for DIO.
For now just move the handling into btrfs_alloc_ordered_extent() to
simplify the callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following functions and structures can be simplified using the
btrfs_file_extent structure:
- can_nocow_extent()
No need to return ram_bytes/orig_block_len through the parameter list,
the @file_extent parameter contains all the needed info.
- can_nocow_file_extent_args
The following members are no longer needed:
* disk_bytenr
This one is confusing as it's not really the
btrfs_file_extent_item::disk_bytenr, but where the IO would be,
thus it's file_extent::disk_bytenr + file_extent::offset now.
* num_bytes
Now file_extent::num_bytes.
* extent_offset
Now file_extent::offset.
* disk_num_bytes
Now file_extent::disk_num_bytes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member extent_map::block_start can be calculated from
extent_map::disk_bytenr + extent_map::offset for regular extents.
And otherwise just extent_map::disk_bytenr.
And this is already validated by the validate_extent_map(). Now we can
remove the member.
However there is a special case in btrfs_create_dio_extent() where we
for NOCOW/PREALLOC ordered extents cannot directly use the resulting
btrfs_file_extent, as btrfs_split_ordered_extent() cannot handle them
yet.
So for that call site, we pass file_extent->disk_bytenr +
file_extent->num_bytes as disk_bytenr for the ordered extent, and 0 for
offset.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_map::block_len is either extent_map::len (non-compressed
extent) or extent_map::disk_num_bytes (compressed extent).
Since we already have sanity checks to do the cross-checks between the
new and old members, we can drop the old extent_map::block_len now.
For most call sites, they can manually select extent_map::len or
extent_map::disk_num_bytes, since most if not all of them have checked
if the extent is compressed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have extent_map::offset, the old extent_map::orig_start is just
extent_map::start - extent_map::offset for non-hole/inline extents.
And since the new extent_map::offset is already verified by
validate_extent_map() while the old orig_start is not, let's just remove
the old member from all call sites.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since extent_map structure has the all the needed members to represent a
file extent directly, we can apply all the file extent sanity checks to
an extent map.
The new sanity checks will cross check both the old members
(block_start/block_len/orig_start) and the new members
(disk_bytenr/disk_num_bytes/offset).
There is a special case for offset/orig_start/start cross check, we only
do such sanity check for compressed extent, as only compressed
read/encoded write really utilize orig_start.
This can be proved by the cleanup patch of orig_start.
The checks happens at the following times:
- add_extent_mapping()
This is for newly added extent map
- replace_extent_mapping()
This is for btrfs_drop_extent_map_range() and split_extent_map()
- try_merge_map()
For a lot of call sites we have to properly populate all the members to
pass the sanity check, meanwhile the following code needs extra
modification:
- setup_file_extents() from inode-tests
The file extents layout of setup_file_extents() is already too invalid
that tree-checker would reject most of them in real world.
However there is just a special unaligned regular extent which has
mismatched disk_num_bytes (4096) and ram_bytes (4096 - 1).
So instead of dropping the whole test case, here we just unify
disk_num_bytes and ram_bytes to 4096 - 1.
- test_case_7() from extent-map-tests
An extent is inserted with 16K length, but on-disk extent size is
only 4K.
This means it must be a compressed extent, so set the compressed flag
for it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce two new members for extent_map:
- disk_bytenr
- offset
Both are matching the members with the same name inside
btrfs_file_extent_items.
For now this patch only touches those members when:
- Reading btrfs_file_extent_items from disk
- Inserting new holes
- Merging two extent maps
With the new disk_bytenr and disk_num_bytes, doing merging would be a
little more complex, as we have 3 different cases:
* Both extent maps are referring to the same data extents
|<----- data extent A ----->|
|<- em 1 ->|<- em 2 ->|
* Both extent maps are referring to different data extents
|<-- data extent A -->|<-- data extent B -->|
|<- em 1 ->|<- em 2 ->|
* One of the extent maps is referring to a merged and larger data
extent that covers both extent maps
This is not really valid case other than some selftests.
So this test case would be removed.
A new helper merge_ondisk_extents() is introduced to handle the above
valid cases.
To properly assign values for those new members, a new btrfs_file_extent
parameter is introduced to all the involved call sites.
- For NOCOW writes the btrfs_file_extent would be exposed from
can_nocow_file_extent().
- For other writes, the members can be easily calculated
As most of them have 0 offset and utilizing the whole on-disk data
extent.
The exception is encoded write, but thankfully that interface provided
offset directly and all other needed info.
For now, both the old members (block_start/block_len/orig_start) are
co-existing with the new members (disk_bytenr/offset), meanwhile all the
critical code is still using the old members only.
The cleanup will happen later after all the old and new members are
properly validated.
There would be some re-ordering for the assignment of the extent_map
members, now we follow the new ordering:
- start and len
Or file_pos and num_bytes for other structures.
- disk_bytenr and disk_num_bytes
- offset and ram_bytes
- compression
So expect some seemingly unrelated line movement.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently function can_nocow_extent() only returns members needed for
extent_map.
However since we will soon change the extent_map structure to be more
like btrfs_file_extent_item, we want to expose the expected file extent
caused by the NOCOW write for future usage.
This introduces a new structure, btrfs_file_extent, to be a more
memory access friendly representation of btrfs_file_extent_item.
And use that structure to expose the expected file extent caused by the
NOCOW write.
For now there is no user of the new structure yet.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the core of the fiemap code lives in extent_io.c, which does
not make any sense because it's not related to extent IO at all (and it
was not as well before the big rewrite of fiemap I did some time ago).
The entry point for fiemap, btrfs_fiemap(), lives in inode.c since it's
an inode operation.
Since there's a significant amount of fiemap code, move all of it into a
dedicated file, including its entry point inode.c:btrfs_fiemap().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that there is a helper to commit the current transaction and we are
using it, there's no need for the label and goto statements at
ensure_commit_roots_uptodate(). So replace them with direct return
statements that call btrfs_commit_current_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places that attach to the current transaction with
btrfs_attach_transaction_barrier() and then commit the transaction if
there is one. Add a helper and use it to deduplicate this pattern.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At finish_extent_writes_for_zoned() we use btrfs_join_transaction() to
catch any running transaction and then commit it. This will however create
a new and empty transaction in case there's no running transaction anymore
(got committed by the transaction kthread or other task for example) or
there's a running transaction finishing its commit and with a state >=
TRANS_STATE_UNBLOCKED. In the former case we don't need to do anything
while in the second case we just need to wait for the transaction to
complete its commit.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction. This helps avoiding creating and
committing empty transactions, saving IO, time and unnecessary rotation of
the backup roots in the super block.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At ensure_commit_roots_uptodate() we use btrfs_join_transaction() to
catch any running transaction and then commit it. This will however create
a new and empty transaction in case there's no running transaction anymore
(got committed by the transaction kthread or other task for example) or
there's a running transaction finishing its commit and with a state >=
TRANS_STATE_UNBLOCKED. In the former case we don't need to do anything
while in the second case we just need to wait for the transaction to
complete its commit.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction. This helps avoiding creating and
committing empty transactions, saving IO, time and unnecessary rotation of
the backup roots in the super block.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before starting a send operation we have to make sure that every root has
its commit root matching the regular root, to that send doesn't find stale
inodes in the commit root (inodes that were deleted in the regular root)
and fails the inode lookups with -ESTALE.
Currently we keep looking for roots used by the send operation and as soon
as we find one we commit the current transaction (or a new one since
btrfs_join_transaction() creates one if there isn't any running or the
running one is in a state >= TRANS_STATE_UNBLOCKED). It's pointless to
keep looking until we don't find any, because after the first transaction
commit all the other roots are updated too, as they were already tagged in
the fs_info->fs_roots_radix radix tree when they were modified in order to
have a commit root different from the regular root.
Currently we are also always passing the main send root into
btrfs_join_transaction(), which despite not having any functional issue,
it is not optimal because in case the root wasn't modified we end up
adding it to fs_info->fs_roots_radix and then update its root item in the
root tree when committing the transaction, causing unnecessary work.
So simplify and make this more efficient by removing the looping and by
passing the first root we found that is modified as the argument to
btrfs_join_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_commit_super(), called in a few contexts such as when unmounting
a filesystem, we use btrfs_join_transaction() to catch any running
transaction and then commit it. This will however create a new and empty
transaction in case there's no running transaction or there's a running
transaction with a state >= TRANS_STATE_UNBLOCKED.
As we just want to be sure that any existing transaction is fully
committed, we can use btrfs_attach_transaction_barrier() instead of
btrfs_join_transaction(), therefore avoiding the creation and commit of
empty transactions, which only waste IO and causes rotation of the
precious backup roots.
Example where we create and commit a pointless empty transaction:
$ mkfs.btrfs -f /dev/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 6
$ mount /dev/sdj /mnt/sdj
$ touch /mnt/sdj/foo
# Commit the currently open transaction. Just 'sync' or wait ~30
# seconds for the transaction kthread to commit it.
$ sync
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 7
$ umount /mnt/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 8
The transaction with id 8 was pointless, an empty transaction that did
not achieve anything.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing reservations we are using btrfs_join_transaction() to get a
handle for the current transaction and then commit it to try to release
space. However btrfs_join_transaction() has some undesirable consequences:
1) If there's no running transaction, it will create one, and we will
commit it right after. This is unnecessary because it will not release
any space, and it will result in unnecessary IO and rotation of backup
roots in the superblock;
2) If there's a current transaction and that transaction is committing
(its state is >= TRANS_STATE_COMMIT_DOING), it will wait for that
transaction to almost finish its commit (for its state to be >=
TRANS_STATE_UNBLOCKED) and then start and return a new transaction.
We will then commit that new transaction, which is pointless because
all we wanted was to wait for the current (previous) transaction to
fully finish its commit (state == TRANS_STATE_COMPLETED), and by
starting and committing a new transaction we are wasting IO too and
causing unnecessary rotation of backup roots in the superblock.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The range is specified only in two ways, we can simplify the case for
the whole filesystem range as a NULL block group parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we fully clean a subvolume (not only delete its directory,
but fully clean all it's related data and root item), the associated
qgroup would not be removed.
We have "btrfs qgroup clear-stale" to handle such 0 level qgroups.
Change the behavior to automatically removie the qgroup of a fully
cleaned subvolume when possible:
- Full qgroup but still consistent
We can and should remove the qgroup.
The qgroup numbers should be 0, without any rsv.
- Full qgroup but inconsistent
Can happen with drop_subtree_threshold feature (skip accounting
and mark qgroup inconsistent).
We can and should remove the qgroup.
Higher level qgroup numbers will be incorrect, but since qgroup
is already inconsistent, it should not be a problem.
- Squota mode
This is the special case, we can only drop the qgroup if its numbers
are all 0.
This would be handled by can_delete_qgroup(), so we only need to check
the return value and ignore the -EBUSY error.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222847
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently if one is utilizing "qgroups/drop_subtree_threshold" sysfs,
and a snapshot with level higher than that value is dropped, we will
not be able to delete the qgroup until next qgroup rescan:
uuid=ffffffff-eeee-dddd-cccc-000000000000
wipefs -fa $dev
mkfs.btrfs -f $dev -O quota -s 4k -n 4k -U $uuid
mount $dev $mnt
btrfs subvolume create $mnt/subv1/
for (( i = 0; i < 1024; i++ )); do
xfs_io -f -c "pwrite 0 2k" $mnt/subv1/file_$i > /dev/null
done
sync
btrfs subvolume snapshot $mnt/subv1 $mnt/snapshot
btrfs quota enable $mnt
btrfs quota rescan -w $mnt
sync
echo 1 > /sys/fs/btrfs/$uuid/qgroups/drop_subtree_threshold
btrfs subvolume delete $mnt/snapshot
btrfs subvolume sync $mnt
btrfs qgroup show -prce --sync $mnt
btrfs qgroup destroy 0/257 $mnt
umount $mnt
The final qgroup removal would fail with the following error:
ERROR: unable to destroy quota group: Device or resource busy
[CAUSE]
The above script would generate a subvolume of level 2, then snapshot
it, enable qgroup, set the drop_subtree_threshold, then drop the
snapshot.
Since the subvolume drop would meet the threshold, qgroup would be
marked inconsistent and skip accounting to avoid hanging the system at
transaction commit.
But currently we do not allow a qgroup with any rfer/excl numbers to be
dropped, and this is not really compatible with the new
drop_subtree_threshold behavior.
[FIX]
Only require the strict zero rfer/excl/rfer_cmpr/excl_cmpr for squota
mode. This is due to the fact that squota can never go inconsistent,
and it can have dropped subvolume but with non-zero qgroup numbers for
future accounting.
For full qgroup mode, we only check if there is a subvolume for it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reported by 'gcc -Wcast-qual', the argument from which write_extent_buffer()
reads data to write to the eb should be const. In addition the const
needs to be also added to __write_extent_buffer() local buffers.
All callers of write_eb_member() can now be updated to use const for the
input buffer structure or type.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was reported by 'gcc -Wcast-qual', the get_unaligned_le8() simply
returns the argument and there's no reason to drop the cast.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was added in c61a16a701 ("Btrfs: fix the confusion between
delalloc bytes and metadata bytes") and removed in 03fe78cc29
("btrfs: use delalloc_bytes to determine flush amount for
shrink_delalloc") where the calculation was reworked to use a
non-constant numbers. This was found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've started to use for-loop local variables and in a few places this
shadows a function variable. Convert a few cases reported by 'make W=2'.
If applicable also change the style to post-increment, that's the
preferred one.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix variable names in two macros where there's a local function variable
of the same name. In subpage_calc_start_bit() it's in several callers,
in btrfs_abort_transaction() it's only in replace_file_extents().
Found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running 'make W=2' there are a few reports where a variable of the
same name is declared in a nested block. In all the cases we can use the
one declared in the parent block, no problematic cases were found.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a VFS inode local pointer and then doing many BTRFS_I()
calls inside btrfs_sync_file(), use a btrfs_inode pointer instead. This
makes everything a bit easier to read and less confusing, allowing to
make some statements shorter.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a inode pointer, use a btrfs_inode pointer in the log
context structure, as this is generally what we need and allows for some
internal APIs to take a btrfs_inode instead, making them more consistent
with most of the code base. This will later allow to help to remove a lot
of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_finish_ordered_extent() returns a boolean indicating if
the ordered extent was added to the work queue for completion, but none
of its callers cares about it, so make it return void.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_block_group_root() is declared in disk-io.c; however,
all its callers are in block-group.c. Move it to the latter file and
declare it static.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the single-use variable bytenr_orig and instead use btrfs_sb_offset()
in the function argument passing.
Fix a stale comment about not automatically fixing a bad primary
superblock from the backup mirror copies. Also, move the comment closer
to where the primary superblock read occurs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are currently using a cached rb_root (struct rb_root_cached) for the
rb root of struct extent_map_tree. This doesn't offer much of an advantage
here because:
1) It's only advantage over the regular rb_root is that it caches a
pointer to the left most node (first node), so a call to
rb_first_cached() doesn't have to chase pointers until it reaches
the left most node;
2) We only have two scenarios that access left most node with
rb_first_cached():
When dropping all extent maps from an inode, during inode eviction;
When iterating over extent maps during the extent map shrinker;
3) In both cases we keep removing extent maps, which causes deletion of
the left most node so rb_erase_cached() has to call rb_next() to find
out what's the next left most node and assign it to
struct rb_root_cached::rb_leftmost;
4) We can do that ourselves in those two uses cases and stop using a
rb_root_cached rb tree and use instead a regular rb_root rb tree.
This reduces the size of struct extent_map_tree by 8 bytes and, since
this structure is embedded in struct btrfs_inode, it also reduces the
size of that structure by 8 bytes.
So on a 64 bits platform the size of btrfs_inode is reduced from 1032
bytes down to 1024 bytes.
This means we will be able to have 4 inodes per 4K page instead of 3.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we name the rb_root member of struct extent_map_tree as 'map',
which is odd and confusing. Since it's a root node, rename it to 'root'.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On 64 bits platforms we don't really need to have a dedicated member (the
objectid field) for the inode's number since we store in the VFS inode's
i_ino member, which is an unsigned long and this type is 64 bits wide on
64 bits platforms. We only need that field in case we are on a 32 bits
platform because the unsigned long type is 32 bits wide on such platforms
See commit 33345d0152 ("Btrfs: Always use 64bit inode number") regarding
this 64/32 bits detail.
The objectid field of struct btrfs_inode is also used to store the ID of
a root for directories that are stubs for unreferenced roots. In such
cases the inode is a directory and has the BTRFS_INODE_ROOT_STUB runtime
flag set.
So in order to reduce the size of btrfs_inode structure on 64 bits
platforms we can remove the objectid member and use the VFS inode's i_ino
member instead whenever we need to get the inode number. In case the inode
is a root stub (BTRFS_INODE_ROOT_STUB set) we can use the member
last_reflink_trans to store the ID of the unreferenced root, since such
inode is a directory and reflinks can't be done against directories.
So remove the objectid fields for 64 bits platforms and alias the
last_reflink_trans field with a name of ref_root_id in a union.
On a release kernel config, this reduces the size of struct btrfs_inode
from 1040 bytes down to 1032 bytes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently struct btrfs_inode has a key member, named "location", that is
either:
1) The key of the inode's item. In this case the objectid is the number
of the inode;
2) A key stored in a dir entry with a type of BTRFS_ROOT_ITEM_KEY, for
the case where we have a root that is a snapshot of a subvolume that
points to other subvolumes. In this case the objectid is the ID of
a subvolume inside the snapshotted parent subvolume.
The key is only used to lookup the inode item for the first case, while
for the second it's never used since it corresponds to directory stubs
created with new_simple_dir() and which are marked as dummy, so there's
no actual inode item to ever update. In the second case we only check
the key type at btrfs_ino() for 32 bits platforms and its objectid is
only needed for unlink.
Instead of using a key we can do fine with just the objectid, since we
can generate the key whenever we need it having only the objectid, as
in all use cases the type is always BTRFS_INODE_ITEM_KEY and the offset
is always 0.
So use only an objectid instead of a full key. This reduces the size of
struct btrfs_inode from 1048 bytes down to 1040 bytes on a release kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When not using the NO_HOLES feature we always allocate an io tree for an
inode's file_extent_tree. This is wasteful because that io tree is only
used for regular files, so we allocate more memory than needed for inodes
that represent directories or symlinks for example, or for inodes that
correspond to free space inodes.
So improve on this by allocating the io tree only for inodes of regular
files that are not free space inodes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The index_cnt field of struct btrfs_inode is used only for two purposes:
1) To store the index for the next entry added to a directory;
2) For the data relocation inode to track the logical start address of the
block group currently being relocated.
For the relocation case we use index_cnt because it's not used for
anything else in the relocation use case - we could have used other fields
that are not used by relocation such as defrag_bytes, last_unlink_trans
or last_reflink_trans for example (among others).
Since the csum_bytes field is not used for directories, do the following
changes:
1) Put index_cnt and csum_bytes in a union, and index_cnt is only
initialized when the inode is a directory. The csum_bytes is only
accessed in IO paths for regular files, so we're fine here;
2) Use the defrag_bytes field for relocation, since the data relocation
inode is never used for defrag purposes. And to make the naming better,
alias it to reloc_block_group_start by using a union.
This reduces the size of struct btrfs_inode by 8 bytes in a release
kernel, from 1056 bytes down to 1048 bytes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
