Some callers expect __start_server() helper to pass their own "backlog"
value to listen() instead of the default of 1. So this patch adds struct
member "backlog" for network_helper_opts to allow callers to set "backlog"
value via start_server_str() helper.
listen(fd, 0 /* backlog */) can be used to enforce syncookie. Meaning
backlog 0 is a legit value.
Using 0 as a default and changing it to 1 here is fine. It makes the test
program easier to write for the common case. Enforcing syncookie mode by
using backlog 0 is a niche use case but it should at least have a way for
the caller to do that. Thus, -ve backlog value is used here for the
syncookie use case. Please see the comment in network_helpers.h for
the details.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/1660229659b66eaad07aa2126e9c9fe217eba0dd.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
bypassing most (or at least some) of the connect_to_fd_opts() logic. It's
much better that test should have its own connect_to_fd_opts() instead.
This patch adds a new "type" parameter for connect_to_fd_opts(), then
opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in
it.
In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass
it to connect_to_fd_opts().
In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to
connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW"
and "SOCK_DGRAM" are passed to it.
With these changes, the strcut member "type" of network_helper_opts can be
dropped now.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the post_socket_cb() callback is added in struct network_helper_opts,
it's make sense to use it not only in __start_server(), but also in
connect_to_fd_opts(). Then it can be used to set TCP_CONGESTION sockopt.
Add a "void *" type member cb_opts into struct network_helper_opts, and add
a new struct named cb_opts in prog_tests/bpf_tcp_ca.c, then cc can be moved
into struct cb_opts from network_helper_opts. Define a new callback cc_cb()
to set TCP_CONGESTION sockopt, and set it to post_socket_cb pointer of opts.
Define a new cb_opts cubic, set it to cb_opts of opts. Pass this opts to
connect_to_fd_opts() in test_dctcp_fallback().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/b512bb8d8f6854c9ea5c409b69d1bf37c6f272c6.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
__start_server() sets SO_REUSPORT through setsockopt() when the parameter
'reuseport' is set. This patch makes it more flexible by adding a function
pointer post_socket_cb into struct network_helper_opts. The
'const struct post_socket_opts *cb_opts' args in the post_socket_cb is
for the future extension.
The 'reuseport' parameter can be dropped.
Now the original start_reuseport_server() can be implemented by setting a
newly defined reuseport_cb() function pointer to post_socket_cb filed of
struct network_helper_opts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/470cb82f209f055fc7fb39c66c6b090b5b7ed2b2.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
ASSERT helpers defined in test_progs.h shouldn't be used in public
functions like open_netns() and close_netns(). Since they depend on
test__fail() which defined in test_progs.c. Public functions may be
used not only in test_progs.c, but in other tests like test_sock_addr.c
in the next commit.
This patch uses log_err() to replace ASSERT helpers in open_netns()
and close_netns() in network_helpers.c to decouple dependencies, then
uses ASSERT_OK_PTR() to check the return values of all open_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/d1dad22b2ff4909af3f8bfd0667d046e235303cb.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Introduce a new function called get_hw_size that retrieves both the
current and maximum size of the interface and stores this information
in the 'ethtool_ringparam' structure.
Remove ethtool_channels struct from xdp_hw_metadata.c due to redefinition
error. Remove unused linux/if.h include from flow_dissector BPF test to
address CI pipeline failure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-4-tushar.vyavahare@intel.com
These selftests are written in prog_tests style instead of adding
them to the existing test_sock_addr tests. Migrating the existing
sock addr tests to prog_tests style is left for future work. This
commit adds support for testing bind() sockaddr hooks, even though
there's no unix socket sockaddr hook for bind(). We leave this code
intact for when the INET and INET6 tests are migrated in the future
which do support intercepting bind().
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-10-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
We use two programs to check that the new reuseport logic is executed
appropriately.
The first is a TC clsact program which bpf_sk_assigns
the skb to a UDP or TCP socket created by user space. Since the test
communicates via lo we see both directions of packets in the eBPF.
Traffic ingressing to the reuseport socket is identified by looking
at the destination port. For TCP, we additionally need to make sure
that we only assign the initial SYN packets towards our listening
socket. The network stack then creates a request socket which
transitions to ESTABLISHED after the 3WHS.
The second is a reuseport program which shares the fact that
it has been executed with user space. This tells us that the delayed
lookup mechanism is working.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-8-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The previous patches have removed the need to do the mount and umount
dance when switching netns. In particular:
* Avoid remounting /sys/fs/bpf to have a clean start
* Avoid remounting /sys to get a ifindex of a particular netns
This patch can finally remove the mount and umount dance in
{open,close}_netns which is unnecessarily complicated and
error-prone.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221129070900.3142427-6-martin.lau@linux.dev
When compiling selftests/bpf in optimized mode (-O2), GCC erroneously
complains about uninitialized token variable:
In file included from network_helpers.c:22:
network_helpers.c: In function ‘open_netns’:
test_progs.h:355:22: error: ‘token’ may be used uninitialized [-Werror=maybe-uninitialized]
355 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
network_helpers.c:440:14: note: in expansion of macro ‘ASSERT_OK_PTR’
440 | if (!ASSERT_OK_PTR(token, "malloc token"))
| ^~~~~~~~~~~~~
In file included from /data/users/andriin/linux/tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:21,
from bpf_util.h:9,
from network_helpers.c:20:
/data/users/andriin/linux/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [Makefile:522: /data/users/andriin/linux/tools/testing/selftests/bpf/network_helpers.o] Error 1
This is completely bogus becuase libbpf_get_error() doesn't dereference
pointer, but the only easy way to silence this is to allocate initialized
memory with calloc().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220705224818.4026623-2-andrii@kernel.org
This patch adds a base for MPTCP specific tests.
It is currently limited to the is_mptcp field in case of plain TCP
connection because there is no easy way to get the subflow sk from a msk
in userspace. This implies that we cannot lookup the sk_storage attached
to the subflow sk in the sockops program.
v4:
- add copyright 2022 (Andrii)
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop SEC("version") (Andrii)
- use is_mptcp in tcp_sock, instead of bpf_tcp_sock (Martin & Andrii)
v5:
- Drop connect_to_mptcp_fd (Martin)
- Use BPF test skeleton (Andrii)
- Use ASSERT_EQ (Andrii)
- Drop the 'msg' parameter of verify_sk
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-4-mathew.j.martineau@linux.intel.com
Minimal selftest which implements a small BPF policy program to the
connect(2) hook which rejects TCP connection requests to port 60123
with EPERM. This is being attached to a non-root cgroup v2 path. The
test asserts that this works under cgroup v2-only and under a mixed
cgroup v1/v2 environment where net_classid is set in the former case.
Before fix:
# ./test_progs -t cgroup_v1v2
test_cgroup_v1v2:PASS:server_fd 0 nsec
test_cgroup_v1v2:PASS:client_fd 0 nsec
test_cgroup_v1v2:PASS:cgroup_fd 0 nsec
test_cgroup_v1v2:PASS:server_fd 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
run_test:PASS:join_classid 0 nsec
(network_helpers.c:219: errno: None) Unexpected success to connect to server
test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 0)
#27 cgroup_v1v2:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
After fix:
# ./test_progs -t cgroup_v1v2
#27 cgroup_v1v2:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210913230759.2313-3-daniel@iogearbox.net
The next test requires to setsockopt(TCP_CONGESTION) before
connect(), so a new arg is needed for the connect_to_fd() to specify
the cc's name.
This patch adds a new "struct network_helper_opts" for the future
option needs. It starts with the "cc" and "timeout_ms" option.
A new helper connect_to_fd_opts() is added to take the new
"const struct network_helper_opts *opts" as an arg.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173019.3977910-1-kafai@fb.com
Rewrite to skel and ASSERT macros as well while we are at it.
v3:
- replace -f with -A to make it work with busybox ping.
-A is available on both busybox and iputils, from the man page:
On networks with low RTT this mode is essentially equivalent to
flood mode.
v2:
- don't check result of bpf_map__fd (Yonghong Song)
- remove from .gitignore (Andrii Nakryiko)
- move ping_command into network_helpers (Andrii Nakryiko)
- remove assert() (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210804205524.3748709-1-sdf@google.com
This patch adds tests for the batching and bpf_(get|set)sockopt in
bpf tcp iter.
It first creates:
a) 1 non SO_REUSEPORT listener in lhash2.
b) 256 passive and active fds connected to the listener in (a).
c) 256 SO_REUSEPORT listeners in one of the lhash2 bucket.
The test sets all listeners and connections to bpf_cubic before
running the bpf iter.
The bpf iter then calls setsockopt(TCP_CONGESTION) to switch
each listener and connection from bpf_cubic to bpf_dctcp.
The bpf iter has a random_retry mode such that it can return EAGAIN
to the usespace in the middle of a batch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200625.1036874-1-kafai@fb.com
This patch makes a few changes to the network_helpers.c
1) Enforce SO_RCVTIMEO and SO_SNDTIMEO
This patch enforces timeout to the network fds through setsockopt
SO_RCVTIMEO and SO_SNDTIMEO.
It will remove the need for SOCK_NONBLOCK that requires a more demanding
timeout logic with epoll/select, e.g. epoll_create, epoll_ctrl, and
then epoll_wait for timeout.
That removes the need for connect_wait() from the
cgroup_skb_sk_lookup.c. The needed change is made in
cgroup_skb_sk_lookup.c.
2) start_server():
Add optional addr_str and port to start_server().
That removes the need of the start_server_with_port(). The caller
can pass addr_str==NULL and/or port==0.
I have a future tcp-hdr-opt test that will pass a non-NULL addr_str
and it is in general useful for other future tests.
"int timeout_ms" is also added to control the timeout
on the "accept(listen_fd)".
3) connect_to_fd(): Fully use the server_fd.
The server sock address has already been obtained from
getsockname(server_fd). The sockaddr includes the family,
so the "int family" arg is redundant.
Since the server address is obtained from server_fd, there
is little reason not to get the server's socket type from the
server_fd also. getsockopt(server_fd) can be used to do that,
so "int type" arg is also removed.
"int timeout_ms" is added.
4) connect_fd_to_fd():
"int timeout_ms" is added.
Some code is also refactored to connect_fd_to_addr() which is
shared with connect_to_fd().
5) Preserve errno:
Some callers need to check errno, e.g. cgroup_skb_sk_lookup.c.
Make changes to do it more consistently in save_errno_close()
and log_err().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200702004852.2103003-1-kafai@fb.com
Extend the existing connect_force_port test to assert get{peer,sock}name programs
as well. The workflow for e.g. IPv4 is as follows: i) server binds to concrete
port, ii) client calls getsockname() on server fd which exposes 1.2.3.4:60000 to
client, iii) client connects to service address 1.2.3.4:60000 binds to concrete
local address (127.0.0.1:22222) and remaps service address to a concrete backend
address (127.0.0.1:60123), iv) client then calls getsockname() on its own fd to
verify local address (127.0.0.1:22222) and getpeername() on its own fd which then
publishes service address (1.2.3.4:60000) instead of actual backend. Same workflow
is done for IPv6 just with different address/port tuples.
# ./test_progs -t connect_force_port
#14 connect_force_port:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/3343da6ad08df81af715a95d61a84fb4a960f2bf.1589841594.git.daniel@iogearbox.net
Add two new network helpers.
connect_fd_to_fd connects an already created client socket fd to address
of server fd. Sometimes it's useful to separate client socket creation
and connecting this socket to a server, e.g. if client socket has to be
created in a cgroup different from that of server cgroup.
Additionally connect_to_fd is now implemented using connect_fd_to_fd,
both helpers don't treat EINPROGRESS as an error and let caller decide
how to proceed with it.
connect_wait is a helper to work with non-blocking client sockets so
that if connect_to_fd or connect_fd_to_fd returned -1 with errno ==
EINPROGRESS, caller can wait for connect to finish or for connection
timeout. The helper returns -1 on error, 0 on timeout (1sec,
hard-coded), and positive number on success.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1403fab72300f379ca97ead4820ae43eac4414ef.1589486450.git.rdna@fb.com
Move the following routines that let us start a background listener
thread and connect to a server by fd to the test_prog:
* start_server - socket+bind+listen
* connect_to_fd - connect to the server identified by fd
These will be used in the next commit.
Also, extend these helpers to support AF_INET6 and accept the family
as an argument.
v5:
* drop pthread.h (Martin KaFai Lau)
* add SO_SNDTIMEO (Martin KaFai Lau)
v4:
* export extra helper to start server without a thread (Martin KaFai Lau)
* tcp_rtt is no longer starting background thread (Martin KaFai Lau)
v2:
* put helpers into network_helpers.c (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-2-sdf@google.com
