There is a bug found in vml2 xgmi logic:
mtype is always sent as NC on the VMC to TC interface for a page walk,
regardless of whether the request is being sent to local or remote GPU.
NC means non-coherent and will cause the VMC return data to be cached
in the TCC (versus UC – uncached will not cache the data). Since the
page table updates are being done by SDMA/HDP, then TCC will never be
updated and the GC VML2 will continue to hit on the TCC and never get
the updated page tables and result in a fault.
Heave weigh tlb invalidation does a WB/INVAL of the L1/L2 GL data
caches so TCC will not be hit on next request
Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It does the same thing we were doing already. I though it needed
work for gen3/4 speeds, but that seems to be covered already.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware versions can be found as separate sysfs files at:
/sys/class/drm/cardX/device/fw_version (where X is the card number)
The firmware versions are displayed in hexadecimal.
v2: Moved sysfs files to subfolder
Signed-off-by: Ori Messinger <ori.messinger@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it requires to initialize HDP_NONSURFACE_BASE, so as to avoid
using the value left by a previous VM under sriov scenario.
v2: it should not hurt baremetal, generalize it for both sriov
and baremetal
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add badpages node.
it will output badpages list in format
gpu pfn : gpu page size : flags
example
0x00000000 : 0x00001000 : R
0x00000001 : 0x00001000 : R
0x00000002 : 0x00001000 : R
0x00000003 : 0x00001000 : R
0x00000004 : 0x00001000 : R
0x00000005 : 0x00001000 : R
0x00000006 : 0x00001000 : R
0x00000007 : 0x00001000 : P
0x00000008 : 0x00001000 : P
0x00000009 : 0x00001000 : P
flags can be one of below characters
R: reserved.
P: pending for reserve.
F: failed to reserve for some reasons.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During S3 test, when system wake up and resume, ras interface
is already allocated. Move workaround before ras jumps to resume
step in gfx_v9_0_ecc_late_init, and make sure workaround applied
during resume. Also remove unused mmGB_EDC_MODE clearing.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New feature for RLC, some registers can be programmed by
RLC interface under SR-IOV VF:
WREG32_SOC15_RLC_SHADOW:
1, for GRBM_GFX_CNTL, firstly the new register value should be be
programmed to SCRATCH_REG2
1, for GRBM_GFX_INDEX, firstly the new register value should be be
programmed to SCRATCH_REG3
WREG32_RLC:
for registers supported to be programmed by RLC interface, the
following sequence should be used:
1, write the value to SCRATCH_REG0
2, write reg | 0x80000000 to SCRATCH_REG1
3, write 0x1 to RLC_SPARE_INT to notify RLC
4, polling SCRATCH_REG1 to check if finished
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vega10 SR-IOV VF, skip setting some regs due to:
1, host will program them
2, avoid VF register programming violations
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add implementation to program regs by PSP, currently the following
IH registers are supported:
IH_RB_CNTL
IH_RB_CNTL_RING1
IH_RB_CNTL_RING2
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to support new PSP feature that PSP may provide interface
to program IH CNTL register, initialize PSP before IH under Vega10
SR-IOV VF
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check ras TA error code and return EAGAIN.
Issue ras enable/disable cmd without checking currect state.
Looks like ras TA will handle current state == target state case.
Now driver might need do a reset to satisfy ras TA.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v6: Squash in warning fix (Colin Ian King)
v5: Fix warnings (Alex)
v4: fixed mixed delaration and code warnings and minor errors
v3: exposing df funcs in amdgpu_df_funcs in amdgpu.h
v2: moving permonctl/perfmonctr from default to offset
- adding df perfmonctl and perfmonctr registers for df counters
- adding df funcs to set perfmonctl and get perfmonctr for
df and xgmi counters
- exposing df funcs in amdgpu_df_funcs
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When RAS is enabled, initializes the VGPRs/LDS/SGPRs and
resets EDC error counts. This is done in late_init, before
RAS TA GFX enable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are getting a dma-buf implementation completely separate from drm prime,
so rename the files now and cleanup the code a bit.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix some spacing issues, log output, uses of !=NULL/==NULL, unneeded
extra lines and clean up a declaration from =1 to =true for clarity
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a sysfs file for reporting the number of PCIe replays (NAKs). This
returns the sum of NAKs received and NAKs generated
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the sequence of set/get xgmi topology, so driver can have the latest
XGMI topology info for future usage
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
