With commit c1177979af ("btf, scripts: Exclude Rust CUs with pahole")
we are now able to use pahole directly to identify Rust compilation
units (CUs) and exclude them from generating BTF debugging information
(when DEBUG_INFO_BTF is enabled).
And if pahole doesn't support the --lang-exclude flag, we can't enable
both RUST and DEBUG_INFO_BTF at the same time.
So, in any case, the script is_rust_module.sh is just redundant and we
can drop it.
NOTE: we may also be able to drop the "Rust loadable module" mark
inside Rust modules, but it seems safer to keep it for now to make sure
we are not breaking any external tool that may potentially rely on it.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/20230704052136.155445-1-andrea.righi@canonical.com
[ Picked the `Reviewed-by`s from the old patch too. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `rust_is_available.sh` script runs for everybody compiling the
kernel, even if not using Rust. Therefore, it is important to ensure
that the script is correct to avoid breaking people's compilation.
In addition, the script needs to be able to handle a set of subtle
cases, including parsing version strings of different tools.
Therefore, maintenance of this script can be greatly eased with
a set of tests.
Thus add a test suite to cover hopefully most of the setups that
the script may encounter in the wild. Extra setups can be easily
added later on if missing.
The script currently covers all the branches of the shell script,
including several ways in which they may be entered.
Python is used for this script, since the script under test
does not depend on Rust, thus hopefully making it easier for others
to use if the need arises.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The script already checks for `$RUSTC` and `$BINDGEN` existing
and exiting without failure. However, one may still pass an
unexpected binary that does not output what the later parsing
expects. The script still successfully reports a failure as
expected, but the error is confusing. For instance:
$ RUSTC=true BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
***
*** Please see Documentation/rust/quick-start.rst for details
*** on how to set up the Rust support.
***
Thus add an explicit check and a proper message for unexpected
output from the called command.
Similarly, do so for the `libclang` version parsing, too.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The script already checks if `$RUSTC` and `$BINDGEN` exists via
`command`, but the environment variables may point to a
non-executable file, or the programs may fail for some other reason.
While the script successfully exits with a failure as it should,
the error given can be quite confusing depending on the shell and
the behavior of its `command`. For instance, with `dash`:
$ RUSTC=./mm BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
Thus detect failure exit codes when calling `$RUSTC` and `$BINDGEN` and
print a better message, in a similar way to what we do when extracting
the `libclang` version found by `bindgen`.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to match the version string, `sed` is used in a couple
cases, and `grep` and `head` in a couple others.
Make the script more consistent and easier to understand by
using the same method, `sed`, for all of them.
This makes the version matching also a bit more strict for
the changed cases, since the strings `rustc ` and `bindgen `
will now be required, which should be fine since `rustc`
complains if one attempts to call it with another program
name, and `bindgen` uses a hardcoded string.
In addition, clarify why one of the existing `sed` commands
does not provide an address like the others.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sometimes [1] users may attempt to setup the Rust support by
checking what Kbuild does and they end up finding out about
`scripts/rust_is_available.sh`. Inevitably, they run the script
directly, but unless they setup the required variables,
the result of the script is not meaningful.
We could add some defaults to the variables, but that could be
confusing for those that may override the defaults (compared
to their kernel builds), and `$CC` would not be a simple default
in any case.
Therefore, instead, explicitly check whether the expected variables
are set (`$RUSTC`, `$BINDGEN` and `$CC`). If not, print an explanation
about the fact that the script is meant to be called from Kbuild,
since that is the most likely cause for the variables not being set.
Link: https://lore.kernel.org/oe-kbuild-all/Y6r4mXz5NS0+HVXo@zn.tnic/ [1]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
People trying out the Rust support in the kernel may get
warnings and errors from `scripts/rust_is_available.sh`
from the `rustavailable` target or the build step.
Some of those users may be following the Quick Start guide,
but others may not (likely those getting warnings from
the build step instead of the target).
While the messages are fairly clear on what the problem is,
it may not be clear how to solve the particular issue,
especially for those not aware of the documentation.
We could add all sorts of details on the script for each one,
but it is better to point users to the documentation instead,
where it is easily readable in different formats. It also
avoids duplication.
Thus add a reference to the documentation whenever the script
fails or there is at least a warning.
Reviewed-by: Finn Behrens <fin@nyantec.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust_is_available.sh uses cc-version.sh to identify which C compiler is
in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to
be able to handle multiple arguments in one variable, i.e. "ccache clang".
Its invocation in rust_is_available.sh quotes "$CC", which makes
$1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.
cc-version.sh could also be changed to handle having "ccache clang" as one
argument, but it only has the one consumer upstream, making it simpler to
fix the caller here.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Link: https://github.com/Rust-for-Linux/linux/pull/873
[ Reworded title prefix and reflow line to 75 columns. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit 6ab7e1f95e ("setlocalversion: use only the correct release
tag for git-describe") was absolutely correct to limit which annotated
tags would be used to compute the -01234-gabcdef suffix. Otherwise, if
some random annotated tag exists closer to HEAD than the vX.Y.Z one,
the commit count would be too low.
However, since the version string always includes the
${file_localversion} part, now the problem is that the count can be
too high. For example, building an 6.4.6-rt8 kernel with a few patches
on top, I currently get
$ make -s kernelrelease
6.4.6-rt8-00128-gd78b7f406397
But those 128 commits include the 100 commits that are in
v6.4.6..v6.4.6-rt8, so this is somewhat misleading.
Amend the logic so that, in addition to the linux-next consideration,
the script also looks for a tag corresponding to the 6.4.6-rt8 part of
what will become the `uname -r` string. With this patch (so 29 patches
on top of v6.4.6-rt8), one instead gets
$ make -s kernelrelease
6.4.6-rt8-00029-gd533209291a2
While there, note that the line
git describe --exact-match --match=$tag $tag 2>/dev/null
obviously asks if $tag is an annotated tag, but it does not actually
tell if the commit pointed to has any relation to HEAD. So remove both
uses of --exact-match, and instead just ask if the description
generated is identical to the tag we provided. Since we then already
have the result of
git describe --match=$tag
we also end up reducing the number of times we invoke "git describe".
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Nobody has complained since 2a73cce2da ("scripts/setlocalversion:
remove mercurial, svn and git-svn supports"), so let's also clean up
the header comment accordingly.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
debian/rules is generated by shell, but the escape sequence (\$) is
unreadable.
debian/rules embeds only two variables (ARCH and KERNELRELEASE).
Split them out to debian/rules.vars, and check-in the rest of Makefile
code to scripts/package/debian/rules.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Debian Policy "4.9. Main building script: debian/rules" requires
"debian/rules must start with the line #!/usr/bin/make -f". [1]
Currently, Kbuild does not follow this policy.
When Kbuild generates debian/rules, "#!$(command -v $MAKE) -f" is
expanded by shell. The resuling string may not be "#!/usr/bin/make -f".
There was a reason to opt out the Debian policy.
If you run '/path/to/my/custom/make deb-pkg', debian/rules must also be
invoked by the same Make program. If #!/usr/bin/make were hard-coded in
debian/rules, the sub-make would be executed by a possibly different
Make version.
This is problematic due to the MAKEFLAGS incompatibility, especially the
job server flag. Old Make versions used --jobserver-fds to propagate job
server file descriptors, but Make >= 4.2 uses --jobserver-auth. The flag
disagreement between the parent/child Makes would result in a process
fork explosion.
However, having a non-standard path in the shebang causes another issue;
the generated source package is not portable as such a path does not
exist in other build environments.
This commit solves those conflicting demands.
Hard-code '#!/usr/bin/make -f' in debian/rules to create a portable and
Debian-compliant source package.
Pass '--rules-file=$(MAKE) -f debian/rules' when dpkg-buildpackage is
invoked from Makefile so that debian/rules is executed by the same Make
program as used to start Kbuild.
[1] https://www.debian.org/doc/debian-policy/ch-source.html#main-building-script-debian-rules
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Adds support for out-of-tree rust modules to use the `rust-analyzer`
make target to generate the rust-project.json file.
The change involves adding an optional parameter `external_src` to the
`generate_rust_analyzer.py` which expects the path to the out-of-tree
module's source directory. When this parameter is passed, I have chosen
not to add the non-core modules (samples and drivers) into the result
since these are not expected to be used in third party modules. Related
changes are also made to the Makefile and rust/Makefile allowing the
`rust-analyzer` target to be used for out-of-tree modules as well.
Link: https://github.com/Rust-for-Linux/linux/pull/914
Link: https://github.com/Rust-for-Linux/rust-out-of-tree-module/pull/2
Signed-off-by: Vinay Varma <varmavinaym@gmail.com>
Link: https://lore.kernel.org/r/20230411091714.130525-1-varmavinaym@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove the Elf_Rela variables used in the for-loop in section_rel().
This makes the code consistent; section_rel() only uses Elf_Rel,
section_rela() only uses Elf_Rela.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
MIPS64 little endian target has an odd encoding of r_info.
This commit makes the special handling less ugly. It is still ugly,
but #if conditionals will go away, at least.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
All of addend_*_rel() need the Elf_Rela pointer just for calculating
ELF_R_TYPE(r->r_info).
You can do it on the caller to de-duplicate the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that none of addend_*_rel() returns a meaningful value (the return
value is always 0), change all of them to return the value of r_addend.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
getline() returns -1 at EOF as well as on error. It also doesn't set
errno to 0 on success, so initialize it to 0 before using errno to check
for an error condition. See the paragraph here [1]:
For some system calls and library functions (e.g., getpriority(2)),
-1 is a valid return on success. In such cases, a successful return
can be distinguished from an error return by setting errno to zero
before the call, and then, if the call returns a status that indicates
that an error may have occurred, checking to see if errno has a
nonzero value.
Bear has a bug [2] that launches processes with errno set and causes the
following build failure:
$ bear -- make LLVM=1
...
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
read_symbol: Invalid argument
[1]: https://linux.die.net/man/3/errno
[2]: https://github.com/rizsotto/Bear/issues/469
Fixes: 1c975da56a ("scripts/kallsyms: remove KSYM_NAME_LEN_BUFFER")
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
RCU Tasks Trace is quite specialized, having been created specifically
for sleepable BPF programs. Because it allows general blocking within
readers, any new use of RCU Tasks Trace must take current use cases into
account. Therefore, update checkpatch.pl to complain about use of any of
the RCU Tasks Trace API members outside of BPF and outside of RCU itself.
[ paulmck: Apply Joe Perches feedback. ]
Cc: Andy Whitcroft <apw@canonical.com> (maintainer:CHECKPATCH)
Cc: Joe Perches <joe@perches.com> (maintainer:CHECKPATCH)
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> (reviewer:CHECKPATCH)
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji") added the BuildRequires: field.
Checking the build dependency is fine, but one annoyance is that
'make (bin)rpm-pkg' fails on non-rpm systems [1]. For example, Debian
provides rpmbuild via 'apt install rpm', but of course cannot meet the
requirement listed in the BuildRequires: field.
It is possible to pass RPMOPTS=--nodeps to work around it, but it is
reasonable to do it automatically.
If 'rpm -q rpm' fails, it is not an RPM-managed system. (The command
'rpm' is not installed at all, or was installed by other means.)
In that case, pass --nodeps to skip the build dependency check.
[1]: https://lore.kernel.org/linux-kbuild/Y6mkdYQYmjUz7bqV@li-4a3a4a4c-28e5-11b2-a85c-a8d192c6f089.ibm.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge the similar build targets.
Also, make the output location consistent.
Previously, source packages were created in the build directory,
while binary packages under ~/rpmbuild/RPMS/.
Now, Kbuild creates the rpmbuild/ directory in the build directory,
and saves all packages under it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, 'make rpm-pkg' always builds the kernel from the pristine
source tree in the ~/rpmbuild/BUILD/ directory.
Build the kernel incrementally just like 'make binrpm-pkg'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now kernel.spec and binkernel.spec have the exactly same contents.
Use kernel.spec for binrpm-pkg as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most of the lines in the spec file are independent of any build
condition.
Split the body of the spec file into scripts/package/kernel.spec.
scripts/package/mkspec will prepend some env-dependent variables.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/package/mkspec preprocesses the spec file by sed, but it is
unreadable. This commit removes the last portion of the sed scripting.
Remove the $S$M prefixes from the conditionally generated lines.
Instead, surround the code with %if %{with_devel} ... %endif.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For the same reason as commit 4243afdb93 ("kbuild: builddeb: always
make modules_install, to install modules.builtin*"), run modules_install
even when CONFIG_MODULES=n to install modules.builtin*.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
To reduce the preprocess of the spec file, invoke the kernel build
from rpmbuild.
Run init/build-version to increment the release number not only for
binrpm-pkg but also for srcrpm-pkg and rpm-pkg.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If this affects only %{buildroot}, it should be enough to use a fixed
string for _arch when it is undefined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel-devel RPM package and the linux-headers Debian package
provide headers and scripts needed for building external modules.
They copy the necessary files in slightly different ways - the RPM
copies almost everything except some exclude patterns, while the Debian
copies less number of files. There is no need to maintain different code
to do the same thing.
Split the Debian code out to scripts/package/install-extmod-build, which
is called from both of the packages.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are some cases where we want to run a command with the same
environment variables as Kbuild uses. For example, 'make coccicheck'
invokes scripts/coccicheck from the top Makefile so that the script can
reference to ${LINUXINCLUDE}, ${KBUILD_EXTMOD}, etc. The top Makefile
defines several phony targets that run a script.
We do it also for an internally used script, which results in a somewhat
complex call graph.
One example:
debian/rules binary-arch
-> make intdeb-pkg
-> scripts/package/builddeb
It is also tedious to add a dedicated target like 'intdeb-pkg' for each
use case.
Add a generic target 'run-command' to run an arbitrary command in an
environment with all Kbuild variables set.
The usage is:
$ make run-command KBUILD_RUN_COMMAND=<command>
The concept is similar to:
$ dpkg-architecture -c <command>
This executes <command> in an environment which has all DEB_* variables
defined.
Convert the existing 'make intdeb-pkg'.
Another possible usage is to interrogate a Make variable.
$ make run-command KBUILD_RUN_COMMAND='echo $(KBUILD_CFLAGS)'
might be useful to see KBUILD_CFLAGS set by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, we rely on the top Makefile defining ARCH option when we
run 'make rpm-pkg' or 'make binrpm-pkg'.
It does not apply when we run 'make srcrpm-pkg', and separately run
'rpmbuild' for the generated SRPM. This is a problem for cross-build.
Just like the Debian package, save the value of ARCH in the spec file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, $MAKE will expand to the GNU Make program that created the
source RPM. This is problematic if you carry it to a different build
host to run 'rpmbuild' there.
Consider this command:
$ /path/to/my/custom/make srcrpm-pkg
The spec file in the SRPM will record '/path/to/my/custom/make', which
exists only on that build environment.
To create a portable SRPM, the spec file should avoid hard-coding $MAKE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is unneeded because the Makefile in the output directory wraps
the top-level Makefile in the srctree.
Just run $MAKE irrespective of the build location.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is
undefined") does not work as intended; _arch is always defined as
$UTS_MACHINE.
The intention was to define _arch to $UTS_MACHINE only when it is not
defined.
Fixes: 3089b2be0c ("kbuild: rpm-pkg: fix build error when _arch is undefined")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
You do not need to remember the index of each jump key because you can
count it up after a key is pressed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jesse Taube <Mr.Bossman075@gmail.com>
Commit 95ac9b3b58 ("menuconfig: Assign jump keys per-page instead
of globally") injected a lot of hacks to the bottom of the textbox
infrastructure.
I reverted many of them without changing the behavior. (almost)
Now, the key markers are inserted when constructing the search result
instead of updating the text buffer on-the-fly.
The buffer passed to the textbox got back to a constant string.
The ugly casts from (const char *) to (char *) went away.
A disadvantage is that the same key numbers might be displayed multiple
times in the dialog if you use a huge window (but I believe it is
unlikely to happen).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jesse Taube <Mr.Bossman075@gmail.com>
Currently, all files with EXPORT_SYMBOL() are rebuilt when CONFIG_MODULES
is flipped due to <linux/export.h> depending on CONFIG_MODULES.
Now that modpost can make a final decision about export symbols,
<linux/export.h> does not need to make EXPORT_SYMBOL() no-op.
Instead, modpost can skip emitting KSYMTAB when CONFIG_MODULES is unset.
This commit will reduce the number of recompilation when CONFIG_MODULES
is toggled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rust: avoid creating temporary files
kbuild: flatten KBUILD_CFLAGS
gen_compile_commands: add assembly files to compilation database
kconfig: gconfig: correct program name in help text
kconfig: gconfig: drop the Show Debug Info help text
