Jonathan writes:
2nd set of IIO new device support, cleanups etc for 6.2
Includes a few late breaking fixes for old issues.
Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().
New devices support
* adi,ad74115
- New driver for this complex input/output device with 16 bit ADCs,
14 bit DACs amongst other features.
- A few tidy ups / removal of unused data patches followed.
* adi,adf4377
- New driver for this dual output integer-N phased locked loop and VCO
chip.
* maxim,max30208
- New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
- Support for LSM6DS016IS (chip specific data)
- Support for ISM330IS (id entry only)
Minor cleanups etc
* adi,adis
- Fix a deadlock on device instance specific mutex.
- Tidy up by calling unlocked form of __adis_initial_startup() in all
cases and dropping the locked version.
* adi,ad4130
- Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
- Fix a bug brought on by integer promotion of signed value to unsigned type.
- Add an spi_device_id table to allow module autoloading to work.
- Add support for reset pin.
* adi,ad7606_par
- devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
- Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
for ad7924.
* adi,ltc2983
- Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
unit.
* maxim,max11410
- Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
- Add fallback compatibles to dt-binding.
* renesas,rzg2l
- Document use for RZ/Five SoC.
* st,stm32-adc
- Improved calibration support with error logging and a debugfs
interface to read back the result.
* ti,adc128s052
- Fix an issue with missing data members in the adc128_of_match table that
meant all device were being handled as adc128s052 ADCs.
* tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
iio: addac: ad74413r: fix blank line after declaration warning
iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
dt-bindings: iio: imu: st_lsm6dsx: add ism330is
iio: imu: st_lsm6dsx: add support to ISM330IS
iio: frequency: adf4377: add support for ADF4377
dt-bindings: iio: frequency: add adf4377 doc
dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
iio: adc128s052: add proper .data members in adc128_of_match table
iio: adc: stm32-adc: add debugfs to read raw calibration result
iio: adc: stm32-adc: improve calibration error log
iio: adc: stm32-adc: smart calibration support
iio: addac: ad74413r: add support for reset-gpio
dt-bindings: iio: ad74413r: add optional reset-gpios
iio: addac: ad74413r: add spi_device_id table
dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
iio: addac: add AD74115 driver
...
Jonathan writes:
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
iio: pressure: bmp280: convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
iio: adc: ad4130: depend on GPIOLIB
staging: iio: meter: replace ternary operator by if condition
iio: light: apds9960: Fix iio_event_spec structures
dt-bindings: iio: imu: Add inv_icm42600 documentation
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
iio: proximity: sx9360: Add a new ACPI hardware ID
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
...
MPL115 supports shutdown gpio which can be used to set the state
to low power mode. Power from all internal circuits and
registers is removed. This is done by pulling the SHDN pin to low.
This patch enables runtime PM on MPL115 to increase power savings.
According to spec., a wakeup time period of ~5 ms exists between
waking up and actually communicating with the device. This is
implemented using sleep delay.
Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
Link: https://lore.kernel.org/r/20221010173720.568916-1-rajat.khandelwal@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Simplified common initialization logic of different sensor types
unifying calibration and initial configuration recovery.
Default config param values of each sensor type are stored inside
chip_info structure and used to initialize sensor data struct instance.
The helper functions for read each sensor type calibration are converted
to a callback available on the chip_info struct.
Separated bme280 specific calibration code from bmp280 function. Dropped
the additional chip_id argument in bmp280 code as is not longer required.
Now both bmp280/bme280 calibration function use same signature as bmp180.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Link: https://lore.kernel.org/r/584c90f309e4f24bf2e4aa2b15c8577d288f978d.1663025017.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of registering callback to process sensor events right at
initialization time, wait for the sensor to be register in the iio
subsystem.
Events can come at probe time (in case the kernel rebooted abruptly
without switching the sensor off for instance), and be sent to IIO core
before the sensor is fully registered.
Fixes: aa984f1ba4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220711144716.642617-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When sensor location is known, populate iio sysfs "label" attribute:
* "accel-base" : the sensor is in the base of the convertible (2-1)
device.
* "accel-display" : the sensor is in the lid/display plane of the
device.
* "accel-camera" : the sensor is in the swivel camera subassembly.
The non-standard |location| attribute is removed, the field |loc| in
cros_ec_sensors_core_state is removed.
It apply to standalone accelerometer as well as IMU (accelerometer +
gyroscope) and sensors where the location is known (light).
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220427190804.961697-3-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
