It is reported that amd_pmf driver is missing "depends on" for
CONFIG_POWER_SUPPLY causing the following build error.
ld: drivers/platform/x86/amd/pmf/core.o: in function `amd_pmf_remove':
core.c:(.text+0x10): undefined reference to `power_supply_unreg_notifier'
ld: drivers/platform/x86/amd/pmf/core.o: in function `amd_pmf_probe':
core.c:(.text+0x38f): undefined reference to `power_supply_reg_notifier'
make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make: *** [Makefile:1248: vmlinux] Error 2
Add this to the Kconfig file.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217028
Fixes: c5258d39fc ("platform/x86/amd/pmf: Add helper routine to update SPS thermals")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230213121457.1764463-1-Shyam-sundar.S-k@amd.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Using the serio subsystem now requires the code to be reachable:
x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'
Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.
Fixes: 8e60615e89 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As soon as the first handler or sysfs file is registered
the mutex may get used.
Move the initialization to before any handler registration /
sysfs file creation.
Likewise move the destruction of the mutex to after all
the de-initialization is done.
Fixes: da5ce22df5 ("platform/x86/amd/pmf: Add support for PMF core layer")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130132554.696025-1-hdegoede@redhat.com
Every power mode of static power slider has its own AC and DC power
settings.
When the power source changes from AC to DC, corresponding DC thermals
were not updated from PMF config store and this leads the system to always
run on AC power settings.
Fix it by registering with power_supply notifier and apply DC settings
upon getting notified by the power_supply handler.
Fixes: da5ce22df5 ("platform/x86/amd/pmf: Add support for PMF core layer")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source. This matches the behavior that
Windows uses for Modern Standby as well.
It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.
For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```
In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter. The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.
Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.
When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.
This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).
This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.
It's been fixed in newer platform firmware. To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
commit b0c07116c8 ("platform/x86: amd-pmc: Avoid reading SMU version at
probe time") adjusted the behavior for amd-pmc to avoid reading the SMU
version at startup but rather on first use to improve boot time.
However the SMU version is also used to decide whether to place a timer
based wakeup in the OS_HINT message. If the idlemask hasn't been read
before this message was sent then the SMU version will not have been
cached.
Ensure the SMU version has been read before deciding whether or not to
run this codepath.
Cc: stable@vger.kernel.org # 6.0
Reported-by: You-Sheng Yang <vicamo.yang@canonical.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Fixes: b0c07116c8 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221020113749.6621-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It is observed that when thinkpad_acpi driver loads before amd-pmf
driver, thinkpad_acpi driver sends the AMT "on" event and the request
immediately will be part of the PMF BIOS "pending requests".
With the current amd-pmf code, as soon as the amd-pmf driver gets
probed, it calls apmf_acpi_init() where the notify handler will be
installed. Handler callback would call amd_pmf_handle_amt() where the
amd_pmf_set_automode() shall update the auto-mode thermals.
In this case, the auto-mode config_store shall have "zeros", as the
auto mode init gets called during the later stage.
To fix this, change the order of the acpi notifer install and call it
after the auto mode initialization is done.
Fixes: 7d77dcc83a ("platform/x86/amd/pmf: Handle AMT and CQL events for Auto mode")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220923131724.1812685-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CnQF (a.k.a Cool and Quiet Framework) extends the static slider concept.
PMF dynamically manages system power limits and fan policy based on system
power trends which is representative of workload trend.
Static slider and CnQF controls are mutually exclusive for system power
budget adjustments. CnQF supports configurable number of modes which can
be unique for AC and DC. Every mode is representative of a system state
characterized by unique steady state and boost behavior.
OEMs can configure the different modes/system states and how the
transition to a mode happens. Whether to have CnQF manage system power
budget dynamically in AC or DC or both is also configurable. Mode changes
due to CnQF don't result in slider position change.
The default OEM values are obtained after evaluating the PMF ACPI function
idx 11 & 12 for AC and DC respectively. Whether to turn ON/OFF by default
is guided by a "flag" passed by the OEM BIOS.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922131202.56529-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without CONFIG_DEBUG_FS, the following build error occurs:
drivers/platform/x86/amd/pmc.c:984:17: error: use of undeclared identifier 'pmc_groups'; did you mean 'set_groups'?
.dev_groups = pmc_groups,
^~~~~~~~~~
set_groups
./include/linux/cred.h:65:13: note: 'set_groups' declared here
extern void set_groups(struct cred *, struct group_info *);
^
drivers/platform/x86/amd/pmc.c:984:17: error: incompatible pointer types initializing 'const struct attribute_group **' with an expression of type 'void (struct cred *, struct group_info *)' [-Werror,-Wincompatible-pointer-types]
.dev_groups = pmc_groups,
^~~~~~~~~~
2 errors generated.
pmc_groups was only defined inside a CONFIG_DEBUG_FS block but
commit 7f1ea75d49 ("platform/x86/amd: pmc: Add sysfs files for SMU")
intended for these sysfs files to be available outside of debugfs.
Shuffle the necessary functions out of the CONFIG_DEBUG_FS block so that
the file always builds.
Fixes: 7f1ea75d49 ("platform/x86/amd: pmc: Add sysfs files for SMU")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220922153100.324922-1-nathan@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
variable 'mode' is used uninitialized whenever switch default is taken
in sps.c which leads to the following clang warning.
drivers/platform/x86/amd/pmf/sps.c:96:2: error: variable 'mode' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/platform/x86/amd/pmf/sps.c:101:9: note: uninitialized use occurs here
return mode;
^~~~
drivers/platform/x86/amd/pmf/sps.c:84:9: note: initialize the variable 'mode' to silence this warning
u8 mode;
^
= '\0'
1 error generated.
Fix it by returning -EOPNOTSUPP in default case and also change the return
type of the function amd_pmf_get_pprof_modes() to keep it similar like
other drivers which implement platform_profile.
Fixes: 4c71ae4144 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220822062917.4061503-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Its reported that amd-pmf driver when built with config which does not
have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to
symbols used.
ld: vmlinux.o: in function `amd_pmf_init_sps':
drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register'
ld: vmlinux.o: in function `amd_pmf_deinit_sps':
drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove'
Fix it by adding a "select" to the Kconfig.
Fixes: da5ce22df5 ("platform/x86/amd/pmf: Add support for PMF core layer")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819083858.3987590-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This feature has 3 modes quiet, balanced, performance
The objective of this feature is to track the moving average of system
power over the time period specified and switch to the subsequent mode.
In order to do this, PMF driver will get the moving average of APU power
from PMFW and power threshold, time constants, system config parameters
from OEM inputs.
System power as read by PMF driver from PMFW is the filtered value over
the sampling window. Every sampling window, moving average of system power
is computed. At the end of the monitoring window, the moving average is
compared against the threshold for mode switch for decision making.
With AMD managing the system config limits, any mode switch within
auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled
down.
When "auto mode" is enabled, the static slider control remains out of
the PMF driver, so the platform_profile registration would not
happen in PMF driver.
The transition to auto-mode only happens when the APMF fn5 is enabled
in BIOS, platform_profile set to "balanced" and a AMT
(Auto Mode transition) is received.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF has a generic interface defined via PMF ACPI fn9 for influencing fan
policy during mode switch.
PMF ACPI fn9 will normally be invoked when AMDPMF needs to change the fan
table index for the EC. When AMDPMF is loaded this function will be invoked
to change fan speed. OEM can also choose to report the actual fan table
index and fan RPM to PMF through OEM structure.
This information will be communicated by PMF driver to customer BIOS.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver can send periodic heartbeat signals to OEM BIOS. When BIOS does
not receive the signal after a period of time, it can infer that AMDPMF
has hung or failed to load.
In this situation, BIOS can fallback to legacy operations. OEM can modify
the time interval of the signal or completely disable signals through
ACPI Method.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
SPS (a.k.a. Static Power Slider) gives a feel of Windows performance
power slider for the Linux users, where the user selects a certain
mode (like "balanced", "low-power" or "performance") and the thermals
associated with each selected mode gets applied from the silicon
side via the mailboxes defined through PMFW.
PMF driver hooks to platform_profile by reading the PMF ACPI fn9 to
see if the support is being advertised by ACPI interface.
If supported, the PMF driver reacts to platform_profile selection choices
made by the user and adjust the system thermal behavior.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver implements the ACPI methods as defined by AMD for PMF Support.
The ACPI layer acts as a glue that helps in providing the infrastructure
for OEMs customization.
OEMs can refer to PMF support documentation to decide on the list of
functions to be supported on their specific platform model.
AMD mandates that PMF ACPI fn0 and fn1 to be implemented which
provides the set of functions, params and the notifications that
would be sent to PMF driver so that PMF driver can adapt and
react.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
