Pull RTC updates from Alexandre Belloni:
"A few drivers got some nice cleanups and a new driver are making the
bulk of the changes.
Subsystem:
- allow rtc_read_alarm without read_alarm callback
New driver:
- NXP BBNSM module RTC
Drivers:
- use IRQ flags from fwnode when available
- abx80x: nvmem support
- brcmstb-waketimer: add non-wake alarm support
- ingenic: provide CLK32K clock
- isl12022: cleanups
- moxart: switch to using gpiod API
- pcf85363: allow setting quartz load
- pm8xxx: cleanups and support for setting time
- rv3028, rv3032: add ACPI support"
* tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits)
rtc: pm8xxx: add support for nvmem offset
dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
rtc: abx80x: Add nvmem support
rtc: rx6110: Remove unused of_gpio,h
rtc: efi: Avoid spamming the log on RTC read failure
rtc: isl12022: sort header inclusion alphabetically
rtc: isl12022: Join string literals back
rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
rtc: isl12022: Get rid of unneeded private struct isl12022
rtc: pcf85363: add support for the quartz-load-femtofarads property
dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
rtc: allow rtc_read_alarm without read_alarm callback
rtc: rv3032: add ACPI support
rtc: rv3028: add ACPI support
rtc: bbnsm: Add the bbnsm rtc support
rtc: jz4740: Register clock provider for the CLK32K pin
rtc: jz4740: Use dev_err_probe()
rtc: jz4740: Use readl_poll_timeout
dt-bindings: rtc: Add #clock-cells property
...
On JZ4770 and JZ4780, the CLK32K pin is configurable. By default, it is
configured as a GPIO in input mode, and its value can be read through
GPIO PD14.
With this change, clients can now request the 32 kHz clock on the CLK32K
pin, through Device Tree. This clock is simply a pass-through of the
input oscillator's clock with enable/disable operations.
This will permit the WiFi/Bluetooth chip to work on the MIPS CI20 board,
which does source one of its clocks from the CLK32K pin.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230129120442.22858-5-paul@crapouillou.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20221124154359.039be06c@endymion.delvare
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The regmap abstraction allows us to avoid the private i2c transfer
helpers, and also offers some nice utility functions such as the
regmap_update_bits family.
While at it, simplify the code even more by not keeping track of
->write_enabled: rtc_set_time is not a hot path, so one extra i2c read
doesn't hurt (regmap_update_bits elides the write when the bits are
already as desired).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220921114624.3250848-9-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Introduce support for Texas Instruments Real Time Clock controller on
newer K3 family of SoCs such as AM62x.
The hardware module that is being supported is the "digital only"
version which doesn't have capability of external wakeup sources and
external power backup. However, for many practical applications, this
should suffice as RTC is operational across low power sequences.
The hardware block by itself is split into two distinct domains
internally to further reduce the power consumption with the actual
counter block and comparators clocked off a 32k clock source (which
based on SoC integration can be sourced by an external crystal) and an
register interface block which is driven by the bus clock. While optimal
from power perspective, it does create some complicated synchronizations
and sequences that one must be wary of in the driver handling.
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220623170808.20998-3-nm@ti.com
Pull RTC updates from Alexandre Belloni:
"The bulk of the patches are about replacing the uie_unsupported struct
rtc_device member by a feature bit.
Subsystem:
- remove uie_unsupported, all users have been converted to clear
RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
- RTCs with an alarm with a resolution of a minute are now letting
the core handle rounding down the alarm time
- fix use-after-free on device removal
New driver:
- OP-TEE RTC PTA
Drivers:
- sun6i: Add H616 support
- cmos: Fix the AltCentury for AMD platforms
- spear: set range"
* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
rtc: check if __rtc_read_time was successful
rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
rtc: mc146818-lib: Fix the AltCentury for AMD platforms
rtc: optee: add RTC driver for OP-TEE RTC PTA
rtc: pm8xxx: Return -ENODEV if set_time disallowed
rtc: pm8xxx: Attach wake irq to device
clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
rtc: remove uie_unsupported
rtc: xgene: stop using uie_unsupported
rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: hym8563: let the core handle the alarm resolution
rtc: hym8563: switch to devm_rtc_allocate_device
rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: efi: switch to devm_rtc_allocate_device
rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
rtc: spear: fix spear_rtc_read_time
rtc: spear: drop uie_unsupported
rtc: spear: set range
rtc: spear: switch to devm_rtc_allocate_device
rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
...
These three consoles share a device, the MX23L4005, which contains a
clock and 64 bytes of SRAM storage, and is exposed on the EXI bus
(similar to SPI) on channel 0, device 1. This driver allows it to be
used as a Linux RTC device, where time can be read and set.
The hardware also exposes two timers, one which shuts down the console
and one which powers it on, but these aren’t supported currently.
On the Wii U, the counter bias is stored in a XML file, /config/rtc.xml,
encrypted in the SLC (eMMC storage), using a proprietary filesystem. In
order to avoid having to implement all that, this driver assumes a
bootloader will parse this XML file and write the bias into the SRAM, at
the same location the other two consoles have it.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211215175501.6761-2-linkmauve@linkmauve.fr
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
The current implementation of rtc_time64_to_tm() contains unnecessary
loops, branches and look-up tables. The new one uses an arithmetic-based
algorithm appeared in [1] and is approximately 4.3 times faster (YMMV).
The drawback is that the new code isn't intuitive and contains many 'magic
numbers' (not unusual for this type of algorithm). However, [1] justifies
all those numbers and, given this function's history, the code is unlikely
to need much maintenance, if any at all.
Add a KUnit test case that checks every day in a 160,000 years interval
starting on 1970-01-01 against the expected result. Add a new config
RTC_LIB_KUNIT_TEST symbol to give the option to run this test suite.
[1] Neri, Schneider, "Euclidean Affine Functions and Applications to
Calendar Algorithms". https://arxiv.org/abs/2102.06959
Signed-off-by: Cassio Neri <cassio.neri@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210624201343.85441-1-cassio.neri@gmail.com
The added Kconfig dependency is slightly incorrect, which can
lead to a link failure when the watchdog is a loadable module:
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_rtc_based_timers':
rtc-bd70528.c:(.text+0x6cc): undefined reference to `bd70528_wdt_set'
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_time':
rtc-bd70528.c:(.text+0xaa0): undefined reference to `bd70528_wdt_lock'
arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0xab8): undefined reference to `bd70528_wdt_unlock'
arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_alm_enable':
rtc-bd70528.c:(.text+0xfc0): undefined reference to `bd70528_wdt_lock'
arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0x1030): undefined reference to `bd70528_wdt_unlock'
The problem is that it allows to be built-in if MFD_ROHM_BD71828
is built-in, even when the watchdog is a loadable module.
Rework this so that having the watchdog as a loadable module always
forces the rtc to be a module as well instead of built-in,
regardless of bd71828.
Fixes: c56dc069f2 ("rtc: bd70528: Support RTC on ROHM BD71815")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210422151545.2403356-1-arnd@kernel.org
Pull RTC updates from Alexandre Belloni:
"Mostly small fixes and two drivers gaining alarm support. Summary:
Subsystem:
- UIE emulation has been reworked to avoid calling driver callbacks
when it is known it will not work
Drivers:
- ab-eoz9: add alarm support
- pcf8523: add alarm support"
* tag 'rtc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (27 commits)
rtc: sysfs: check features instead of ops
rtc: omap: use rtc_write to access OMAP_RTC_OSC_REG
rtc: s5m: Remove reference to parent's device pdata
rtc: ds1307: Fix wday settings for rx8130
rtc: pcf8523: report oscillator failures
rtc: pcf8523: add alarm support
rtc: pcf8523: remove useless define
rtc: rtc_update_irq_enable: rework UIE emulation
rtc: ds1307: remove flags
rtc: ds1307: replace HAS_ALARM by RTC_FEATURE_ALARM
rtc: imx-sc: remove .read_alarm
rtc: ds1511: remove unused function
rtc: fsl-ftm-alarm: add MODULE_TABLE()
rtc: rtc-spear: replace spin_lock_irqsave by spin_lock in hard IRQ
dt-bindings: rtc: qcom-pm8xxx-rtc: Add qcom pm8xxx rtc bindings
rtc: pm8xxx: Add RTC support for PMIC PMK8350
rtc: ab-eoz9: make use of RTC_FEATURE_ALARM
rtc: ab-eoz9: add alarm support
rtc: ab-eoz9: set regmap max_register
rtc: pcf85063: fallback to parent of_node
...
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
Immutable branch between MFD and Extcon due for the v5.13 merge window
Immutable branch between MFD and Input due for the v5.13 merge window
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
Immutable branch between MFD and Power due for the v5.13 merge window
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
With this driver, mainline Linux can keep its time and date in sync with
the vendor kernel.
Advanced functionality like alarm and automatic power-on is not yet
supported.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver will compile with warning without OF because armada38x_data and
armada8k_data will be defined but not used. It would be possible to move
then in the #ifdef CONFIG_OF section but then their members will be defined
but not used. Instead of moving most of the driver in the #ifdef, simply
depend on OF.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210202112219.3610853-3-alexandre.belloni@bootlin.com
The Xilinx zynqmp RTC driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.
This causes the driver not to be enable under make ARCH=um allyesconfig,
even though it won't build.
By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.
Fixes: 09ef18bcd5 ("rtc: use devm_platform_ioremap_resource() to simplify code")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210127035146.1523286-1-davidgow@google.com
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
