KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
The dirty log checks are mistakenly testing the first page in the page
table (PT) memory region instead of the page holding the test data
page PTE. This wasn't an issue before commit 406504c7b0 ("KVM:
arm64: Fix S1PTW handling on RO memslots") as all PT pages (including
the first page) were treated as writes.
Fix the page_fault_test dirty logging tests by checking for the right
page: the one for the PTE of the data test page.
Fixes: a4edf25b3e ("KVM: selftests: aarch64: Add dirty logging tests into page_fault_test")
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230127214353.245671-4-ricarkol@google.com
Only Stage1 Page table walks (S1PTW) trying to write into a PTE should
result in the PTE page being dirty in the log. However, the dirty log
tests in page_fault_test default to treat all S1PTW accesses as writes.
Fix the relevant tests by asserting dirty pages only for S1PTW writes,
which in these tests only applies to when Hardware management of the Access
Flag is enabled.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230127214353.245671-3-ricarkol@google.com
Only Stage1 Page table walks (S1PTW) writing a PTE on an unmapped page
should result in a userfaultfd write. However, the userfaultfd tests in
page_fault_test wrongly assert that any S1PTW is a PTE write.
Fix this by relaxing the read vs. write checks in all userfaultfd
handlers. Note that this is also an attempt to focus less on KVM (and
userfaultfd) behavior, and more on architectural behavior. Also note
that after commit 406504c7b0 ("KVM: arm64: Fix S1PTW handling on RO
memslots"), the userfaultfd fault (S1PTW with AF on an unmaped PTE
page) is actually a read: the translation fault that comes before the
permission fault.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230127214353.245671-2-ricarkol@google.com
Define a literal '0' asm input constraint to aarch64/page_fault_test's
guest_cas() as an unsigned long to make clang happy.
tools/testing/selftests/kvm/aarch64/page_fault_test.c:120:16: error:
value size does not match register size specified by the constraint
and modifier [-Werror,-Wasm-operand-widths]
:: "r" (0), "r" (TEST_DATA), "r" (guest_test_memory));
^
tools/testing/selftests/kvm/aarch64/page_fault_test.c:119:15: note:
use constraint modifier "w"
"casal %0, %1, [%2]\n"
^~
%w0
Fixes: 35c5810157 ("KVM: selftests: aarch64: Add aarch64/page_fault_test")
Cc: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 Xen-for-KVM:
* Allow the Xen runstate information to cross a page boundary
* Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
* add support for 32-bit guests in SCHEDOP_poll
x86 fixes:
* One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
* Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
* Clean up the MSR filter docs.
* Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
* Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
* Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
* Advertise (on AMD) that the SMM_CTL MSR is not supported
* Remove unnecessary exports
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
Documentation:
* Remove deleted ioctls from documentation
* Various fixes
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
* kvm-arm64/selftest/s2-faults:
: .
: New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy
: of Ricardo Koller. From the cover letter:
:
: "This series adds a new aarch64 selftest for testing stage 2 fault handling
: for various combinations of guest accesses (e.g., write, S1PTW), backing
: sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a
: hole, write on a readonly memslot). Each test tries a different combination
: and then checks that the access results in the right behavior (e.g., uffd
: faults with the right address and write/read flag). [...]"
: .
KVM: selftests: aarch64: Add mix of tests into page_fault_test
KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test
KVM: selftests: aarch64: Add dirty logging tests into page_fault_test
KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test
KVM: selftests: aarch64: Add aarch64/page_fault_test
KVM: selftests: Use the right memslot for code, page-tables, and data allocations
KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc()
KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type
KVM: selftests: Stash backing_src_type in struct userspace_mem_region
tools: Copy bitfield.h from the kernel sources
KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros
KVM: selftests: Add missing close and munmap in __vm_mem_region_delete()
KVM: selftests: aarch64: Add virt_get_pte_hva() library function
KVM: selftests: Add a userfaultfd library
Signed-off-by: Marc Zyngier <maz@kernel.org>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without affecting
users that don't want atomic operations.
Leave the usage in ucall_free() as-is, it's the one place in tools/ that
actually wants/needs atomic behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new ucall hook, GUEST_UCALL_NONE(), to allow tests to make ucalls
without allocating a ucall struct, and use it to enable single-step
in ARM's debug-exceptions test. Like the disable single-step path, the
enabling path also needs to ensure that no exclusive access sequences are
attempted after enabling single-step, as the exclusive monitor is cleared
on ERET from the debug exception taken to EL2.
The test currently "works" because clear_bit() isn't actually an atomic
operation... yet.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221119013450.2643007-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop ucall_uninit() and ucall_arch_uninit() now that ARM doesn't modify
the host's copy of ucall_exit_mmio_addr, i.e. now that there's no need to
reset the pointer before potentially creating a new VM. The few calls to
ucall_uninit() are all immediately followed by kvm_vm_free(), and that is
likely always going to hold true, i.e. it's extremely unlikely a test
will want to effectively disable ucall in the middle of a test.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-7-seanjc@google.com
Do init_ucall() automatically during VM creation to kill two (three?)
birds with one stone.
First, initializing ucall immediately after VM creations allows forcing
aarch64's MMIO ucall address to immediately follow memslot0. This is
still somewhat fragile as tests could clobber the MMIO address with a
new memslot, but it's safe-ish since tests have to be conversative when
accounting for memslot0. And this can be hardened in the future by
creating a read-only memslot for the MMIO page (KVM ARM exits with MMIO
if the guest writes to a read-only memslot). Add a TODO to document that
selftests can and should use a memslot for the ucall MMIO (doing so
requires yet more rework because tests assumes thay can use all memslots
except memslot0).
Second, initializing ucall for all VMs prepares for making ucall
initialization meaningful on all architectures. aarch64 is currently the
only arch that needs to do any setup, but that will change in the future
by switching to a pool-based implementation (instead of the current
stack-based approach).
Lastly, defining the ucall MMIO address from common code will simplify
switching all architectures (except s390) to a common MMIO-based ucall
implementation (if there's ever sufficient motivation to do so).
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-4-seanjc@google.com
Automatically disable single-step when the guest reaches the end of the
verified section instead of using an explicit ucall() to ask userspace to
disable single-step. An upcoming change to implement a pool-based scheme
for ucall() will add an atomic operation (bit test and set) in the guest
ucall code, and if the compiler generate "old school" atomics, e.g.
40e57c: c85f7c20 ldxr x0, [x1]
40e580: aa100011 orr x17, x0, x16
40e584: c80ffc31 stlxr w15, x17, [x1]
40e588: 35ffffaf cbnz w15, 40e57c <__aarch64_ldset8_sync+0x1c>
the guest will hang as the local exclusive monitor is reset by eret,
i.e. the stlxr will always fail due to the debug exception taken to EL2.
Link: https://lore.kernel.org/all/20221006003409.649993-8-seanjc@google.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221117002350.2178351-3-seanjc@google.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Disable single-step by setting debug.control to KVM_GUESTDBG_ENABLE,
not to SINGLE_STEP_DISABLE. The latter is an arbitrary test enum that
just happens to have the same value as KVM_GUESTDBG_ENABLE, and so
effectively disables single-step debug.
No functional change intended.
Cc: Reiji Watanabe <reijiw@google.com>
Fixes: b18e4d4aeb ("KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221117002350.2178351-2-seanjc@google.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Many KVM selftests take command line arguments which are supposed to be
positive (>0) or non-negative (>=0). Some tests do these validation and
some missed adding the check.
Add atoi_positive() and atoi_non_negative() to validate inputs in
selftests before proceeding to use those values.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-7-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add some readonly memslot tests into page_fault_test. Mark the data and/or
page-table memory regions as readonly, perform some accesses, and check
that the right fault is triggered when expected (e.g., a store with no
write-back should lead to an mmio exit).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-14-ricarkol@google.com
Add a new test for stage 2 faults when using different combinations of
guest accesses (e.g., write, S1PTW), backing source type (e.g., anon)
and types of faults (e.g., read on hugetlbfs with a hole). The next
commits will add different handling methods and more faults (e.g., uffd
and dirty logging). This first commit starts by adding two sanity checks
for all types of accesses: AF setting by the hw, and accessing memslots
with holes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-11-ricarkol@google.com
Currently, the debug-exceptions test doesn't have a test case for
a linked watchpoint. Add a test case for the linked watchpoint to
the test. The new test case uses the highest numbered context-aware
breakpoint (for Context ID match), and the watchpoint#0, which is
linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-9-reijiw@google.com
Currently, the debug-exceptions test doesn't have a test case for
a linked breakpoint. Add a test case for the linked breakpoint to
the test. The new test case uses a pair of breakpoints. One is the
higiest numbered context-aware breakpoint (for Context ID match),
and the other one is the breakpoint#0 (for Address Match), which
is linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-8-reijiw@google.com
Change debug_version() to take the ID_AA64DFR0_EL1 value instead of
vcpu as an argument, and change its callsite to read ID_AA64DFR0_EL1
(and pass it to debug_version()).
Subsequent patches will reuse the register value in the callsite.
No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-7-reijiw@google.com
Currently, debug-exceptions test unnecessarily tracks some test stages
using GUEST_SYNC(). The code for it needs to be updated as test cases
are added or removed. Stop doing the unnecessary stage tracking,
as they are not so useful and are a bit pain to maintain.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-6-reijiw@google.com
Remove the hard-coded {break,watch}point #0 from the guest_code() in
debug-exceptions to allow {break,watch}point number to be specified.
Change reset_debug_state() to zeroing all dbg{b,w}{c,v}r_el0 registers
so that guest_code() can use the function to reset those registers
even when non-zero {break,watch}points are specified for guest_code().
Subsequent patches will add test cases for non-zero {break,watch}points.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-4-reijiw@google.com
* kvm-arm64/misc-6.1:
: .
: Misc KVM/arm64 fixes and improvement for v6.1
:
: - Simplify the affinity check when moving a GICv3 collection
:
: - Tone down the shouting when kvm-arm.mode=protected is passed
: to a guest
:
: - Fix various comments
:
: - Advertise the new kvmarm@lists.linux.dev and deprecate the
: old Columbia list
: .
KVM: arm64: Advertise new kvmarm mailing list
KVM: arm64: Fix comment typo in nvhe/switch.c
KVM: selftests: Update top-of-file comment in psci_test
KVM: arm64: Ignore kvm-arm.mode if !is_hyp_mode_available()
KVM: arm64: vgic: Remove duplicate check in update_affinity_collection()
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the comment to accurately describe the test and recently added
SYSTEM_SUSPEND test case.
What was once psci_cpu_on_test was renamed and extended to squeeze in a
test case for PSCI SYSTEM_SUSPEND. Nonetheless, the author of those
changes (whoever they may be...) failed to update the file comment to
reflect what had changed.
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220819162100.213854-1-oliver.upton@linux.dev
* kvm-arm64/single-step-async-exception:
: .
: Single-step fixes from Reiji Watanabe:
:
: "This series fixes two bugs of single-step execution enabled by
: userspace, and add a test case for KVM_GUESTDBG_SINGLESTEP to
: the debug-exception test to verify the single-step behavior."
: .
KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP
KVM: arm64: selftests: Refactor debug-exceptions to make it amenable to new test cases
KVM: arm64: Clear PSTATE.SS when the Software Step state was Active-pending
KVM: arm64: Preserve PSTATE.SS for the guest while single-step is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a test case for KVM_GUESTDBG_SINGLESTEP to the debug-exceptions test.
The test enables single-step execution from userspace, and check if the
exit to userspace occurs for each instruction that is stepped.
Set the default number of the test iterations to a number of iterations
sufficient to always reproduce the problem that the previous patch fixes
on an Ampere Altra machine.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220917010600.532642-5-reijiw@google.com
KVM/arm64 updates for 5.20:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
The current vgic_init test wrongly assumes that the host cannot
multiple versions of the GIC architecture, while v2 emulation
on v3 has almost always been supported (it was supported before
the standalone v3 emulation).
Tweak the test to support multiple GIC incarnations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 3f4db37e20 ("KVM: arm64: selftests: Make vgic_init gic version agnostic")
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Link: https://lore.kernel.org/r/20220714154108.3531213-1-maz@kernel.org
Fix filename reporting in guest asserts by ensuring the GUEST_ASSERT
macro records __FILE__ and substituting REPORT_GUEST_ASSERT for many
repetitive calls to TEST_FAIL.
Previously filename was reported by using __FILE__ directly in the
selftest, wrongly assuming it would always be the same as where the
assertion failed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reported-by: Ricardo Koller <ricarkol@google.com>
Fixes: 4e18bccc2e
Link: https://lore.kernel.org/r/20220615193116.806312-5-coltonlewis@google.com
[sean: convert more TEST_FAIL => REPORT_GUEST_ASSERT instances]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace calls to kvm_check_cap() that treat its return as a boolean with
calls to kvm_has_cap(). Several instances of kvm_check_cap() were missed
when kvm_has_cap() was introduced.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 3ea9b80965 ("KVM: selftests: Add kvm_has_cap() to provide syntactic sugar")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.
Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.
Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle all memslot0 size adjustments in __vm_create(). Currently, the
adjustments reside in __vm_create_with_vcpus(), which means tests that
call vm_create() or __vm_create() directly are left to their own devices.
Some tests just pass DEFAULT_GUEST_PHY_PAGES and don't bother with any
adjustments, while others mimic the per-vCPU calculations.
For vm_create(), and thus __vm_create(), take the number of vCPUs that
will be runnable to calculate that number of per-vCPU pages needed for
memslot0. To give readers a hint that neither vm_create() nor
__vm_create() create vCPUs, name the parameter @nr_runnable_vcpus instead
of @nr_vcpus. That also gives readers a hint as to why tests that create
larger numbers of vCPUs but never actually run those vCPUs can skip
straight to the vm_create_barebones() variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for taking a vCPU pointer in vCPU-scoped functions, grab
the vCPU(s) created by __vm_vcpu_add() and use the ID from the vCPU
object instead of hardcoding the ID in ioctl() invocations.
Rename init1/init2 => init0/init1 to avoid having odd/confusing code
where vcpu0 consumes init1 and vcpu1 consumes init2.
Note, this change could easily be done when the functions are converted
in the future, and/or the vcpu{0,1} vs. init{1,2} discrepancy could be
ignored, but then there would be no opportunity to poke fun at the
1-based counting scheme.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the vCPU's 'struct kvm_vcpu' object in get-reg-list instead of
hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
