While the comment above the ISA extension ID definitions says
"Entries are sorted alphabetically.", this stopped being good
advice with commit d8a3d8a752 ("riscv: hwcap: make ISA extension
ids can be used in asm"), as we now use macros instead of enums.
Reshuffling defines is error-prone, so, since they don't need to be
in any particular order, change the advice to just adding new
extensions at the bottom. Also, take the opportunity to change
spaces to tabs, merge three comments into one, and move the base
and max defines into more logical locations wrt the ID definitions.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230209123636.123537-1-ajones@ventanamicro.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Runtime code patching must be done at a naturally aligned address, or we
may execute on a partial instruction.
We have encountered problems traced back to static jump functions during
the test. We switched the tracer randomly for every 1~5 seconds on a
dual-core QEMU setup and found the kernel sucking at a static branch
where it jumps to itself.
The reason is that the static branch was 2-byte but not 4-byte aligned.
Then, the kernel would patch the instruction, either J or NOP, with two
half-word stores if the machine does not have efficient unaligned
accesses. Thus, moments exist where half of the NOP mixes with the other
half of the J when transitioning the branch. In our particular case, on
a little-endian machine, the upper half of the NOP was mixed with the
lower part of the J when enabling the branch, resulting in a jump that
jumped to itself. Conversely, it would result in a HINT instruction when
disabling the branch, but it might not be observable.
ARM64 does not have this problem since all instructions must be 4-byte
aligned.
Fixes: ebc00dde8a ("riscv: Add jump-label implementation")
Link: https://lore.kernel.org/linux-riscv/20220913094252.3555240-6-andy.chiu@sifive.com/
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230206090440.1255001-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull xen updates from Juergen Gross:
- help deprecate the /proc/xen files by making the related information
available via sysfs
- mark the Xen variants of play_dead "noreturn"
- support a shared Xen platform interrupt
- several small cleanups and fixes
* tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: sysfs: make kobj_type structure constant
x86/Xen: drop leftover VM-assist uses
xen: Replace one-element array with flexible-array member
xen/grant-dma-iommu: Implement a dummy probe_device() callback
xen/pvcalls-back: fix permanently masked event channel
xen: Allow platform PCI interrupt to be shared
x86/xen/time: prefer tsc as clocksource when it is invariant
x86/xen: mark xen_pv_play_dead() as __noreturn
x86/xen: don't let xen_pv_play_dead() return
drivers/xen/hypervisor: Expose Xen SIF flags to userspace
KVM x86 APIC changes for 6.3:
- Remove a superfluous variables from apic_get_tmcct()
- Fix various edge cases in x2APIC MSR emulation
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Reset xAPIC when userspace forces "impossible" x2APIC => xAPIC transition
Pull hyperv updates from Wei Liu:
- allow Linux to run as the nested root partition for Microsoft
Hypervisor (Jinank Jain and Nuno Das Neves)
- clean up the return type of callback functions (Dawei Li)
* tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Fix hv_get/set_register for nested bringup
Drivers: hv: Make remove callback of hyperv driver void returned
Drivers: hv: Enable vmbus driver for nested root partition
x86/hyperv: Add an interface to do nested hypercalls
Drivers: hv: Setup synic registers in case of nested root partition
x86/hyperv: Add support for detecting nested hypervisor
When enabling linker orphan section warning, I got warnings similar as
below:
ld.lld: warning:
./drivers/firmware/efi/libstub/lib.a(efi-stub-helper.stub.o):(.init.bss)
is being placed in '.init.bss'
Catch the sections so that we can enable linker orphan section warning.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230119155417.2600-5-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When enabling linker orphan section warning, I got warnings similar as
below:
riscv64-linux-gnu-ld: warning: orphan section `.riscv.attributes' from
`init/main.o' being placed in section `.riscv.attributes'
While I don't see any usage of .riscv.attributes sections' in kernel
now, just catch the sections so that we can enable linker orphan
section warning.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230119155417.2600-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When enabling linker orphan section warning, I got warnings similar as
below:
riscv64-linux-gnu-ld: warning: orphan section `.rela.text' from
`init/main.o' being placed in section `.rela.dyn'
Use the approach similar as ARM64 does and declare it in vmlinux.lds.S
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230119155417.2600-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv discards .exit.* sections at run-time but doesn't define
RUNTIME_DISCARD_EXIT. However, the .exit.* sections are still allocated
and kept even if the generic DISCARDS would discard the sections due
to missing RUNTIME_DISCARD_EXIT, because the DISCARD sits at the end of
the linker script. Add the missing RUNTIME_DISCARD_EXIT define so that
it still works if we move DISCARD up or even at the beginning of the
linker script.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230119155417.2600-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pernet tracking doesn't work correctly because other netns might have
set NETLINK_LISTEN_ALL_NSID on its event socket.
In this case its expected that events originating in other net
namespaces are also received.
Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID
requires much more intrusive changes both in netlink and nfnetlink,
f.e. adding a 'setsockopt' callback that lets nfnetlink know that the
event socket entered (or left) ALL_NSID mode.
Move to global tracking instead: if there is an event socket anywhere
on the system, all net namespaces which have conntrack enabled and
use autobind mode will allocate the ecache extension.
netlink_has_listeners() returns false only if the given group has no
subscribers in any net namespace, the 'net' argument passed to
nfnetlink_has_listeners is only used to derive the protocol (nfnetlink),
it has no other effect.
For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event
listeners a new netlink_has_net_listeners() is also needed.
Fixes: 90d1daa458 ("netfilter: conntrack: add nf_conntrack_events autodetect mode")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For IPv6 Jumbo packets, the ipv6_hdr(skb)->payload_len is always 0,
and its real payload_len ( > 65535) is saved in hbh exthdr. With 0
length for the jumbo packets, it may mismatch.
To fix this, we can just use skb->len instead of parsing exthdrs, as
the hbh exthdr parsing has been done before coming to length_mt6 in
ip6_rcv_core() and br_validate_ipv6() and also the packet has been
trimmed according to the correct IPv6 (ext)hdr length there, and skb
len is trustable in length_mt6().
Note that this patch is especially needed after the IPv6 BIG TCP was
supported in kernel, which is using IPv6 Jumbo packets. Besides, to
match the packets greater than 65535 more properly, a v1 revision of
xt_length may be needed to extend "min, max" to u32 in the future,
and for now the IPv6 Jumbo packets can be matched by:
# ip6tables -m length ! --length 0:65535
Fixes: 7c4e983c4f ("net: allow gso_max_size to exceed 65536")
Fixes: 0fe79f28bf ("net: allow gro_max_size to exceed 65536")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When a kernel is built with CONFIG_BOOT_CONFIG_EMBED=y, the intention
will normally be to unconditionally provide the specified kernel-boot
arguments to the kernel, as opposed to requiring a separately provided
bootconfig parameter. Therefore, make the BOOT_CONFIG_FORCE Kconfig
option default to y in kernels built with CONFIG_BOOT_CONFIG_EMBED=y.
The old semantics may be obtained by manually overriding this default.
Link: https://lore.kernel.org/all/20230107162202.GA4028633@paulmck-ThinkPad-P17-Gen-1/
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
The BOOT_CONFIG family of Kconfig options allows a bootconfig file
containing kernel boot parameters to be embedded into an initrd or into
the kernel itself. This can be extremely useful when deploying kernels
in cases where some of the boot parameters depend on the kernel version
rather than on the server hardware, firmware, or workload.
Unfortunately, the "bootconfig" kernel parameter must be specified in
order to cause the kernel to look for the embedded bootconfig file,
and it clearly does not help to embed this "bootconfig" kernel parameter
into that file.
Therefore, provide a new BOOT_CONFIG_FORCE Kconfig option that causes the
kernel to act as if the "bootconfig" kernel parameter had been specified.
In other words, kernels built with CONFIG_BOOT_CONFIG_FORCE=y will look
for the embedded bootconfig file even when the "bootconfig" kernel
parameter is omitted. This permits kernel-version-dependent kernel
boot parameters to be embedded into the kernel image without the need to
(for example) update large numbers of boot loaders.
Link: https://lore.kernel.org/all/20230105005838.GA1772817@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <linux-doc@vger.kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
We are not allowed to return an error at this point.
Looking at the code it looks like ret is always 0 at this
point, but its not.
t = find_table_lock(net, repl->name, &ret, &ebt_mutex);
... this can return a valid table, with ret != 0.
This bug causes update of table->private with the new
blob, but then frees the blob right away in the caller.
Syzbot report:
BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74
Workqueue: netns cleanup_net
Call Trace:
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
__ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613
...
ip(6)tables appears to be ok (ret should be 0 at this point) but make
this more obvious.
Fixes: c58dd2dd44 ("netfilter: Can't fail and free after table replacement")
Reported-by: syzbot+f61594de72d6705aea03@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes: acc641ab95 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull ARM udpates from Russell King:
- Improve Kconfig help text for Cortex A8 and Cortex A9 errata
- Kconfig spelling and grammar fixes
- Allow kernel-mode VFP/Neon in softirq context
- Use Neon in softirq context
- Implement AES-CTR/GHASH version of GCM
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer
ARM: 9288/1: Kconfigs: fix spelling & grammar
ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM
ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile
ARM: 9283/1: permit non-nested kernel mode NEON in softirq context
ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled
ARM: 9281/1: improve Cortex A8/A9 errata help text
nf_conntrack_hash_check_insert() callers free the ct entry directly, via
nf_conntrack_free.
This isn't safe anymore because
nf_conntrack_hash_check_insert() might place the entry into the conntrack
table and then delteted the entry again because it found that a conntrack
extension has been removed at the same time.
In this case, the just-added entry is removed again and an error is
returned to the caller.
Problem is that another cpu might have picked up this entry and
incremented its reference count.
This results in a use-after-free/double-free, once by the other cpu and
once by the caller of nf_conntrack_hash_check_insert().
Fix this by making nf_conntrack_hash_check_insert() not fail anymore
after the insertion, just like before the 'Fixes' commit.
This is safe because a racing nf_ct_iterate() has to wait for us
to release the conntrack hash spinlocks.
While at it, make the function return -EAGAIN in the rmmod (genid
changed) case, this makes nfnetlink replay the command (suggested
by Pablo Neira).
Fixes: c56716c69c ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull m68k updates from Geert Uytterhoeven:
- Add seccomp support
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: /proc/hardware should depend on PROC_FS
selftests/seccomp: Add m68k support
m68k: Add kernel seccomp support
m68k: Check syscall_trace_enter() return code
m68k: defconfig: Update defconfigs for v6.2-rc3
m68k: q40: Do not initialise statics to 0
Fix the following compilation error when CONFIG_PM is set to 'n':
drivers/ufs/host/ufs-mediatek.c: In function `ufs_mtk_runtime_suspend`:
drivers/ufs/host/ufs-mediatek.c:1623:8: error: implicit declaration of
function `ufshcd_runtime_suspend`; did you mean `ufs_mtk_runtime_suspend`?
[-Werror=implicit-function-declaration]
1623 | ret = ufshcd_runtime_suspend(dev);
| ^~~~~~~~~~~~~~~~~~~~~~
| ufs_mtk_runtime_suspend
drivers/ufs/host/ufs-mediatek.c: In function `ufs_mtk_runtime_resume`:
drivers/ufs/host/ufs-mediatek.c:1638:9: error: implicit declaration of function
`ufshcd_runtime_resume`; did you mean `ufs_mtk_runtime_resume`?
[-Werror=implicit-function-declaration]
1638 | return ufshcd_runtime_resume(dev);
| ^~~~~~~~~~~~~~~~~~~~~
| ufs_mtk_runtime_resume
At top level:
drivers/ufs/host/ufs-mediatek.c:1632:12: error: `ufs_mtk_runtime_resume`
defined but not used [-Werror=unused-function]
1632 | static int ufs_mtk_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/ufs/host/ufs-mediatek.c:1618:12: error: `ufs_mtk_runtime_suspend`
defined but not used [-Werror=unused-function]
1618 | static int ufs_mtk_runtime_suspend(struct device *dev)
Link: https://lore.kernel.org/r/20230220142431.54589-1-frank.li@vivo.com
Reported-by: k2ci <kernel-bot@kylinos.cn>
Reported-by: Shida Zhang <zhangshida@kylinos.cn>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During UFS initialization, devfreq initialization is asynchronous:
ufshcd_async_scan() calls ufshcd_add_lus(), which in turn initializes
devfreq for UFS. The simple ondemand governor is then loaded. If it is
built as a module, request_module() is called and throws a warning:
WARNING: CPU: 7 PID: 167 at kernel/kmod.c:136 __request_module+0x1e0/0x460
Modules linked in: crct10dif_ce llcc_qcom phy_qcom_qmp_usb ufs_qcom phy_qcom_snps_femto_v2 ufshcd_pltfrm phy_qcom_qmp_combo ufshcd_core phy_qcom_qmp_ufs qcom_wdt socinfo fuse ipv6
CPU: 7 PID: 167 Comm: kworker/u16:3 Not tainted 6.2.0-rc6-00009-g58706f7fb045 #1
Hardware name: Qualcomm SA8540P Ride (DT)
Workqueue: events_unbound async_run_entry_fn
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __request_module+0x1e0/0x460
lr : __request_module+0x1d8/0x460
sp : ffff800009323b90
x29: ffff800009323b90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff800009323d50 x25: ffff7b9045f57810 x24: ffff7b9045f57830
x23: ffffdc5a83e426e8 x22: ffffdc5ae80a9818 x21: 0000000000000001
x20: ffffdc5ae7502f98 x19: ffff7b9045f57800 x18: ffffffffffffffff
x17: 312f716572667665 x16: 642f7366752e3030 x15: 0000000000000000
x14: 000000000000021c x13: 0000000000005400 x12: ffff7b9042ed7614
x11: ffff7b9042ed7600 x10: 00000000636c0890 x9 : 0000000000000038
x8 : ffff7b9045f2c880 x7 : ffff7b9045f57c68 x6 : 0000000000000080
x5 : 0000000000000000 x4 : 8000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffffdc5ae5d382f0 x0 : 0000000000000001
Call trace:
__request_module+0x1e0/0x460
try_then_request_governor+0x7c/0x100
devfreq_add_device+0x4b0/0x5fc
ufshcd_async_scan+0x1d4/0x310 [ufshcd_core]
async_run_entry_fn+0x34/0xe0
process_one_work+0x1d0/0x320
worker_thread+0x14c/0x444
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
This occurs because synchronous module loading from async is not
allowed. According to __request_module():
/*
* We don't allow synchronous module loading from async. Module
* init may invoke async_synchronize_full() which will end up
* waiting for this task which already is waiting for the module
* loading to complete, leading to a deadlock.
*/
Such a deadlock was experienced on the Qualcomm QDrive3/sa8540p-ride. With
DEVFREQ_GOV_SIMPLE_ONDEMAND=m, the boot hangs after the warning.
Fix both the warning and the deadlock by moving devfreq initialization out
of the async routine.
Tested on the sa8540p-ride by using fio to put the UFS under load, and
printing the trace generated by
/sys/kernel/tracing/events/ufs/ufshcd_clk_scaling events. The trace looks
similar with and without the change.
Link: https://lore.kernel.org/r/20230217194423.42553-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull s390 updates from Heiko Carstens:
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
- Background Color Support
- ASCII Line Character Support
- VT100 Support
- Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest
memory with a specific storage key
- Add support for user space events counting to CPUMF
- Cleanup the vfio/ccw code, which also allows now to properly support
2K Format-2 IDALs
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address
translation enabled. This in turn allows to get rid of code with
special handling in the kernel, which has to distinguish if DAT is on
or off
- Replace kretprobe with rethook
- Various improvements to vfio/ap queue resets:
- Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
- Check TAPQ response codes when verifying successful completion of
ZAPQ.
- Fix erroneous handling of some error response codes.
- Increase the maximum amount of time to wait for successful
completion of ZAPQ
- Rework system call wrappers to get rid of alias functions, which were
only left on s390
- Cleanup diag288_wdt watchdog driver. It has been agreed on with
Guenter Roeck that this goes upstream via the s390 tree
- Add missing loadparm parameter handling for list-directed ECKD
ipl/reipl
- Various improvements to memory detection code
- Remove arch_cpu_idle_time() since the current implementation is
broken, and allows user space observable accounted idle times which
can temporarily decrease
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO
to RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all
CPUs are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all
CPU synchronization, like it is required with IPTE, should be
beneficial
- Fix KFENCE page fault reporting
- Smaller cleanups and improvement all over the place
* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
s390/irq,idle: simplify idle check
s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
s390/processor: let cpu helper functions return boolean values
s390/kfence: fix page fault reporting
s390/zcrypt: introduce ctfm field in struct CPRBX
s390: remove confusing comment from uapi types header file
vfio/ccw: remove WARN_ON during shutdown
s390/entry: remove toolchain dependent micro-optimization
s390/mem_detect: do not truncate online memory ranges info
s390/vx: remove __uint128_t type from __vector128 struct again
s390/mm: add support for RDP (Reset DAT-Protection)
s390/mm: define private VM_FAULT_* reasons from top bits
Documentation: s390: correct spelling
s390/ap: fix status returned by ap_qact()
s390/ap: fix status returned by ap_aqic()
s390: vfio-ap: tighten the NIB validity check
Revert "s390/mem_detect: do not update output parameters on failure"
s390/idle: remove arch_cpu_idle_time() and corresponding code
s390/vx: use simple assignments to access __vector128 members
s390/vx: add 64 and 128 bit members to __vector128 struct
...
nf_ct_put() needs to be called to put the refcount got by
nf_conntrack_find_get() to avoid refcount leak when
nf_conntrack_hash_check_insert() fails.
Fixes: 7d367e0668 ("netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The TC G210 driver only supports devices declared in the device tree.
Hence make this driver dependent on CONFIG_OF. This patch fixes the
following compiler error:
drivers/ufs/host/tc-dwc-g210-pltfrm.c:36:34: error: ‘tc_dwc_g210_pltfm_match’ defined but not used [-Werror=unused-const-variable=]
36 | static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
|
Link: https://lore.kernel.org/r/20230209184914.2762172-1-bvanassche@acm.org
Cc: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The LLDD and the stack currently process FPINs received from the fabric,
but the stack is not aware of any action taken by the driver to alleviate
congestion. The current interface between the driver and the SCSI stack is
limited to passing the notification mainly for statistics and heuristics.
The reaction to an FPIN could be handled either by the driver or by the
stack (marginal path and failover). Amend the interface to indicate if
action on an FPIN has already been reacted to by the LLDDs or not. Add an
additional flag to fc_host_fpin_rcv() to indicate if the FPIN has been
acknowledged/reacted to by the driver.
Also added a new event code FCH_EVT_LINK_FPIN_ACK to notify to the user
that the event has been acknowledged/reacted by the LLDD driver
Link: https://lore.kernel.org/r/20230209034326.882514-1-muneendra.kumar@broadcom.com
Co-developed-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Co-developed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Muneendra <muneendra.kumar@broadcom.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull x86 cpuid updates from Borislav Petkov:
- Cache the AMD debug registers in per-CPU variables to avoid MSR
writes where possible, when supporting a debug registers swap feature
for SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which
is part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
* tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd: Cache debug register values in percpu variables
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
x86/cpu: Support AMD Automatic IBRS
x86/cpu, kvm: Add the SMM_CTL MSR not present feature
x86/cpu, kvm: Add the Null Selector Clears Base feature
x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf
x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature
KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code
x86/cpu, kvm: Add support for CPUID_80000021_EAX
x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h>
x86/gsseg: Use the LKGS instruction if available for load_gs_index()
x86/gsseg: Move load_gs_index() to its own new header file
x86/gsseg: Make asm_load_gs_index() take an u16
x86/opcode: Add the LKGS instruction to x86-opcode-map
x86/cpufeature: Add the CPU feature bit for LKGS
x86/bugs: Reset speculation control settings on init
x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A fix for:
BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses]
Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271
Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we
expect the size to be sanitized before first access to addl_desc_ptr[1].
Make sure we don't walk beyond end of page.
Link: https://lore.kernel.org/r/20230202162451.15346-2-thenzl@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently proc_dobool expects a (bool *) in table->data, but sizeof(int)
in table->maxsize, because it uses do_proc_dointvec() directly.
This is unsafe for at least two reasons:
1. A sysctl table definition may use { .data = &variable, .maxsize =
sizeof(variable) }, not realizing that this makes the sysctl unusable
(see the Fixes: tag) and that they need to use the completely
counterintuitive sizeof(int) instead.
2. proc_dobool() will currently try to parse an array of values if given
.maxsize >= 2*sizeof(int), but will try to write values of type bool
by offsets of sizeof(int), so it will not work correctly with neither
an (int *) nor a (bool *). There is no .maxsize validation to prevent
this.
Fix this by:
1. Constraining proc_dobool() to allow only one value and .maxsize ==
sizeof(bool).
2. Wrapping the original struct ctl_table in a temporary one with .data
pointing to a local int variable and .maxsize set to sizeof(int) and
passing this one to proc_dointvec(), converting the value to/from
bool as needed (using proc_dou8vec_minmax() as an example).
3. Extending sysctl_check_table() to enforce proc_dobool() expectations.
4. Fixing the proc_dobool() docstring (it was just copy-pasted from
proc_douintvec, apparently...).
5. Converting all existing proc_dobool() users to set .maxsize to
sizeof(bool) instead of sizeof(int).
Fixes: 83efeeeb3d ("tty: Allow TIOCSTI to be disabled")
Fixes: a2071573d6 ("sysctl: introduce new proc handler proc_dobool")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
If the catlen is 0, the memory for the netlbl_lsm_catmap
structure must be allocated anyway, otherwise the check of
such rules is not completed correctly.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
