[ Upstream commit 7a92fc8b4d ]
The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).
But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.
So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Stable-dep-of: d9807d60c1 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
Pull m68knommu updates from Greg Ungerer:
"A few changes, most of them related to fixing warnings when compiling
with "W=1". These follow up Geert's recent changes for M68K for this
too. These ones complete the fixes for the nommu and ColdFire specific
code.
Also a couple of other fixes to improve ROM default addressing and
compiling for the Cleopatra boards.
Summary:
- improve default Kconfig ROM section settings
- fix compilation for some Cleopatra boards
- fixes and cleanups for warnings compiling with 'W=1'"
* tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: 68000: fix warning in timer code
m68k: 68000: fix warnings in 68000 interrupt handling
m68k: coldfire: remove unused variable in MMU code
m68k: coldfire: fix warnings in uboot argument processing
m68k: coldfire: make mcf_maskimr() static
m68k: coldfire: ensure gpio prototypes visible
m68k: coldfire: add and use "vectors.h"
m68knommu: fix compilation for ColdFire/Cleopatra boards
m68knommu: improve config ROM setting defaults
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
Pull dma-mapping updates from Christoph Hellwig:
- get rid of the fake support for coherent DMA allocation on coldfire
with caches (Christoph Hellwig)
- add a few Kconfig dependencies so that Kconfig catches the use of
invalid configurations (Christoph Hellwig)
- fix a type in dma-debug output (Chuck Lever)
- rewrite a comment in swiotlb (Sean Christopherson)
* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: Fix a typo in a debugging eye-catcher
swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
m68k: remove unused includes from dma.c
m68k: don't provide arch_dma_alloc for nommu/coldfire
net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
m68k: use the coherent DMA code for coldfire without data cache
dma-direct: warn when coherent allocations aren't supported
dma-direct: simplify the use atomic pool logic in dma_direct_alloc
dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL
Pull m68k updates from Geert Uytterhoeven:
- misc aesthetical improvements for the floating point emulator
- remove the last user of strlcpy()
- use kernel's generic libgcc functions
- misc fixes for W=1 builds
- misc indentation fixes
- misc fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (72 commits)
m68k: lib: Include <linux/libgcc.h> for __muldi3()
m68k: fpsp040: Fix indentation by 5 spaces
m68k: Fix indentation by 2 or 5 spaces in <asm/page_mm.h>
m68k: kernel: Fix indentation by 7 spaces in traps.c
m68k: sun3: Fix indentation by 5 or 7 spaces
m68k: Fix indentation by 7 spaces in <asm/io_mm.h>
m68k: defconfig: Update virt_defconfig for v6.6-rc3
m68k: defconfig: Update defconfigs for v6.6-rc1
m68k: io: Mark mmio read addresses as const
m68k: Replace GPL 2.0+ README.legal boilerplate with SPDX
m68k: sun3: Change led_pattern[] to unsigned char
m68k: Add missing types to asm/irq.h
m68k: sun3/3x: Add and use "sun3.h"
m68k: sun3x: Make dvma_print() static
m68k: sun3x: Make sun3x_halt() static
m68k: sun3x: Do not mark dvma_map_iommu() inline
m68k: sun3x: Fix signature of sun3_leds()
m68k: sun3: Make sun3_platform_init() static
m68k: sun3: Make print_pte() static
m68k: sun3: Annotate prom_printf() with __printf()
...
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
When building with W=1:
CC arch/m68k/68000/timers.o
arch/m68k/68000/timers.c:120:5: warning: no previous prototype for ‘m68328_hwclk’ [-Wmissing-prototypes]
int m68328_hwclk(int set, struct rtc_time *t)
^~~~~~~~~~~~
Include m68328.h to get prototype for m68328_hwclk().
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When building with W=1:
CC arch/m68k/68000/ints.o
arch/m68k/68000/ints.c:77:6: warning: no previous prototype for ‘process_int’ [-Wmissing-prototypes]
void process_int(int vec, struct pt_regs *fp)
^~~~~~~~~~~
arch/m68k/68000/ints.c:153:13: warning: no previous prototype for ‘trap_init’ [-Wmissing-prototypes]
void __init trap_init(void)
^~~~~~~~~
Include linux/cpu.h to get the prototype for taps_init().
Create a local ints.h for prototype of process_int(). Also mark
process_int() as asmlinkage, since it is called from the first level
interrupt assembly handler.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When building with W=1:
CC arch/m68k/mm/mcfmmu.o
arch/m68k/mm/mcfmmu.c: In function ‘paging_init’:
arch/m68k/mm/mcfmmu.c:41:30: warning: variable ‘bootmem_end’ set but not used [-Wunused-but-set-variable]
unsigned long next_pgtable, bootmem_end;
^~~~~~~~~~~
Remove variable bootmem_end and its unused setting.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When building with W=1:
CC arch/m68k/kernel/uboot.o
arch/m68k/kernel/uboot.c: In function ‘parse_uboot_commandline’:
arch/m68k/kernel/uboot.c:68:36: warning: variable ‘uboot_initrd_end’ set but not used [-Wunused-but-set-variable]
unsigned long uboot_initrd_start, uboot_initrd_end;
^~~~~~~~~~~~~~~~
arch/m68k/kernel/uboot.c:68:16: warning: variable ‘uboot_initrd_start’ set but not used [-Wunused-but-set-variable]
unsigned long uboot_initrd_start, uboot_initrd_end;
^~~~~~~~~~~~~~~~~~
arch/m68k/kernel/uboot.c:66:16: warning: variable ‘uboot_kbd’ set but not used [-Wunused-but-set-variable]
unsigned long uboot_kbd;
^~~~~~~~~
arch/m68k/kernel/uboot.c: At top level:
arch/m68k/kernel/uboot.c:90:13: warning: no previous prototype for ‘process_uboot_commandline’ [-Wmissing-prototypes]
__init void process_uboot_commandline(char *commandp, int size)
^~~~~~~~~~~~~~~~~~~~~~~~~
A couple of issues here. Firstly we already have a bootinfo.h that has a
prototype for process_uboot_commandline(), we should include that.
Secondly uboot_kbd is not used at all and can be removed. Thirdly the
conditional code based on CONFIG_BLK_DEV_INITRD means that sometimes
uboot_initrd_start and uboot_initrd_end are not needed. Make their
declaration and asignment conditional on CONFIG_BLK_DEV_INITRD same as
the code that uses them.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When building with W=1:
CC arch/m68k/coldfire/intc.o
arch/m68k/coldfire/intc.c:83:6: warning: no previous prototype for ‘mcf_maskimr’ [-Wmissing-prototypes]
void mcf_maskimr(unsigned int mask)
^~~~~~~~~~~
The mcf_maskimr() function is only used within this file, make it static
to reduce name space pollution and fix warning.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When building with W=1:
CC arch/m68k/coldfire/gpio.o
arch/m68k/coldfire/gpio.c:19:5: warning: no previous prototype for ‘__mcfgpio_get_value’ [-Wmissing-prototypes]
int __mcfgpio_get_value(unsigned gpio)
^~~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/gpio.c:25:6: warning: no previous prototype for ‘__mcfgpio_set_value’ [-Wmissing-prototypes]
void __mcfgpio_set_value(unsigned gpio, int value)
^~~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/gpio.c:50:5: warning: no previous prototype for ‘__mcfgpio_direction_input’ [-Wmissing-prototypes]
int __mcfgpio_direction_input(unsigned gpio)
^~~~~~~~~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/gpio.c:65:5: warning: no previous prototype for ‘__mcfgpio_direction_output’ [-Wmissing-prototypes]
int __mcfgpio_direction_output(unsigned gpio, int value)
^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/m68k/coldfire/gpio.c:96:5: warning: no previous prototype for ‘__mcfgpio_request’ [-Wmissing-prototypes]
int __mcfgpio_request(unsigned gpio)
^~~~~~~~~~~~~~~~~
arch/m68k/coldfire/gpio.c:102:6: warning: no previous prototype for ‘__mcfgpio_free’ [-Wmissing-prototypes]
void __mcfgpio_free(unsigned gpio)
^~~~~~~~~~~~~~
The local m68k asm version of gpio.h has prototypes for all of these,
but they are not always visible depending on the config options enabled.
Move the prototypes so they are always visible.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When building with W=1:
arch/m68k/coldfire/vectors.c:43:13: warning: no previous prototype for ‘trap_init’ [-Wmissing-prototypes]
void __init trap_init(void)
^~~~~~~~~
Fix this by introducing a new header file "vectors.h" for holding the
prototypes of functions implemented in arch/m68k/coldfire/vectors.c.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The ColdFire based Cleopatra family of boards use mostly the same
external pin arrangements as the NETtel board family. The build uses the
NETtel specific code as needed, but not all the conditional defines
allow for this. If you have the CONFIG_NETtel config option set
everything compiles as expected, but if you only select the
CONFIG_CLEOPATRA board type then you will get compile failures:
arch/m68k/coldfire/nettel.c: In function ‘nettel_smc91x_init’:
arch/m68k/coldfire/nettel.c:126:2: error: implicit declaration of function ‘mcf_setppdata’; did you mean ‘xas_set_update’? [-Werror=implicit-function-declaration]
mcf_setppdata(0, 0x0080);
^~~~~~~~~~~~~
xas_set_update
Fix the nettel.h include conditional checks to cover all board types.
This also means some code paths need to check for the 5407 SoC - since
one of the Cleopatra board types is based on that. It is very similar
to the 5307 specific code, and it can use that "as-is".
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The ROM region configuration settings used on some nommu m68k systems
(historically mostly 68328 (Dragonball) CPUs) default to an address
of 0. That can easily clash with default RAM address settings which
also default to 0. Of course that is invalid and those ranges overlap,
but if you make no value selection that is what you end up with. Those
default values produce a valid configuration but will fail compilation
like this:
m68k-linux-ld: section .rodata VMA [0000000000001000,0000000000262227] overlaps section .text VMA [0000000000000400,0000000000455e7f]
Looking at the platforms that use the ROM region configuration settings
it is clear that we can choose much better defaults than 0. By far the
most common ROM region settings are these:
CONFIG_ROMVEC=0x10c10000
CONFIG_ROMSTART=0x10c10400
So lets make these the default values.
It is still possible to configure overlapping ROM and RAM regions, but
at least the default selections are now valid.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305301407.z33zOjcG-lkp@intel.com/
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
dma.c doesn't need most of the headers it includes. Also there is
no point in undefining the DEBUG symbol given that it isn't used
anywhere in this small file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Coldfire cores configured with a data cache can't provide coherent
DMA allocations at all.
Instead of returning non-coherent kernel memory in this case,
return NULL and fail the allocation.
The only driver that used to rely on the previous behavior (fec) has
been switched to use non-coherent allocations for this case recently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Coldfire cores configured without a data cache are DMA coherent and
should thus simply use the simple coherent version of dma-direct.
Introduce a new COLDFIRE_COHERENT_DMA Kconfig symbol as a convenient
short hand for such configurations, and a M68K_NONCOHERENT_DMA symbol
for all cases where we need to build non-coherent DMA infrastructure
to simplify the Kconfig and code conditionals.
Not building the non-coherent DMA code slightly reduces the code
size for such configurations.
Numers for m5249evb_defconfig below:
text data bss dec hex filename
2896158 401052 65392 3362602 334f2a vmlinux.before
2895166 400988 65392 3361546 334b0a vmlinux.after
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Instead of using arch_dma_alloc if none of the generic coherent
allocators are used, require the architectures to explicitly opt into
providing it. This will used to deal with the case of m68knommu and
coldfire where we can't do any coherent allocations whatsoever, and
also makes it clear that arch_dma_alloc is a last resort.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Rename the fbdev mmap helper fb_pgprotect() to pgprot_framebuffer().
The helper sets VMA page-access flags for framebuffers in device I/O
memory.
Also clean up the helper's parameters and return value. Instead of
the VMA instance, pass the individial parameters separately: existing
page-access flags, the VMAs start and end addresses and the offset
in the underlying device memory rsp file. Return the new page-access
flags. These changes align pgprot_framebuffer() with other pgprot_()
functions.
v4:
* fix commit message (Christophe)
v3:
* rename fb_pgprotect() to pgprot_framebuffer() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922080636.26762-3-tzimmermann@suse.de
commit c35559f94e ("x86/shstk: Introduce map_shadow_stack syscall")
recently added support for map_shadow_stack() but it is limited to x86
only for now. There is a possibility that other architectures (namely,
arm64 and RISC-V), that are implementing equivalent support for shadow
stacks, might need to add support for it.
Independent of that, reserving arch-specific syscall numbers in the
syscall tables of all architectures is good practice and would help
avoid future conflicts. map_shadow_stack() is marked as a conditional
syscall in sys_ni.c. Adding it to the syscall tables of other
architectures is harmless and would return ENOSYS when exercised.
Note, map_shadow_stack() was assigned #453 during the merge process
since #452 was taken by fchmodat2().
For Powerpc, map it to sys_ni_syscall() as is the norm for Powerpc
syscall tables.
For Alpha, map_shadow_stack() takes up #563 as Alpha still diverges from
the common syscall numbering system in the other architectures.
Link: https://lore.kernel.org/lkml/20230515212255.GA562920@debug.ba.rivosinc.com/
Link: https://lore.kernel.org/lkml/b402b80b-a7c6-4ef0-b977-c0f5f582b78a@sirena.org.uk/
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable modular build of the new device model tests,
- Enable modular build of the glob self-test on configs that didn't
have it yet (visible since commit b67abaad4d ("kunit: Allow
kunit test modules to use test filtering")),
- Replace CONFIG_FB=y by CONFIG_FRAMEBUFFER_CONSOLE=y on the virt
platform (the former is no longer needed since commit
55bffc8170 ("fbdev: Split frame buffer support in FB and
FB_CORE symbols")), the latter is no longer auto-enabled since
commit a5ae331edb ("drm: Drop select FRAMEBUFFER_CONSOLE for
DRM_FBDEV_EMULATION")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/43ef623c9053862d93fbc746689d4897b35597ef.1694442486.git.geert@linux-m68k.org
Passing constant __iomem tokens into the readl() family of helpers
or any of the others causes a warning on m68k:
include/asm-generic/io.h: In function 'ioread8_rep':
arch/m68k/include/asm/io_mm.h:375:44: warning: passing argument 1 of 'raw_insb' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
375 | #define readsb(port, buf, nr) raw_insb((port), (u8
Add a 'const' modifier to the pointers to shut up the warnings here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309251926.bPl23AhG-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230925155328.443664-1-arnd@kernel.org
[geert: Fix missed rom_in_{8,be16,le16}()]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Upstream Linux never had a "README.legal" file, but it was present
in early source releases of Linux/m68k. It contained a simple copyright
notice and a link to a version of the "COPYING" file that predated the
addition of the "only valid GPL version is v2" clause.
Get rid of the references to non-existent files by replacing the
boilerplate with SPDX license identifiers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/23430c233728ab02ec0af8e714994398d383137a.1695031668.git.geert@linux-m68k.org
As reported in commit f8b648bf66 ("net: sunhme: move asm includes to
below linux includes") when including this <asm/*> header before the
needed <linux/*> headers the compilation will fail because of missing
types:
arch/m68k/include/asm/irq.h:66:20: warning: ‘struct pt_regs’ declared inside parameter list will not be visible outside of this definition or declaration
66 | struct pt_regs *));
| ^~~~~~~
arch/m68k/include/asm/irq.h:78:11: error: expected ‘;’ before ‘void’
78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
| ^~~~~
| ;
arch/m68k/include/asm/irq.h:78:40: warning: ‘struct pt_regs’ declared inside parameter list will not be visible outside of this definition or declaration
78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
| ^~~~~~~
arch/m68k/include/asm/irq.h:79:8: error: unknown type name ‘atomic_t’
79 | extern atomic_t irq_err_count;
| ^~~~~~~~
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/5971770.lOV4Wx5bFT@eto.sf-tec.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When building with W=1:
arch/m68k/sun3/idprom.c:86:6: warning: no previous prototype for ‘sun3_get_model’ [-Wmissing-prototypes]
86 | void sun3_get_model(char *model)
| ^~~~~~~~~~~~~~
arch/m68k/sun3/config.c:53:24: warning: no previous prototype for ‘sun3_init’ [-Wmissing-prototypes]
53 | asmlinkage void __init sun3_init(void)
| ^~~~~~~~~
arch/m68k/sun3/mmu_emu.c:117:6: warning: no previous prototype for ‘print_pte_vaddr’ [-Wmissing-prototypes]
117 | void print_pte_vaddr (unsigned long vaddr)
| ^~~~~~~~~~~~~~~
arch/m68k/sun3/mmu_emu.c:126:13: warning: no previous prototype for ‘mmu_emu_init’ [-Wmissing-prototypes]
126 | void __init mmu_emu_init(unsigned long bootmem_end)
| ^~~~~~~~~~~~
arch/m68k/sun3/mmu_emu.c:353:5: warning: no previous prototype for ‘mmu_emu_handle_fault’ [-Wmissing-prototypes]
353 | int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault)
| ^~~~~~~~~~~~~~~~~~~~
arch/m68k/sun3/leds.c:6:6: warning: no previous prototype for ‘sun3_leds’ [-Wmissing-prototypes]
6 | void sun3_leds(unsigned char byte)
| ^~~~~~~~~
arch/m68k/sun3/intersil.c:27:5: warning: no previous prototype for ‘sun3_hwclk’ [-Wmissing-prototypes]
27 | int sun3_hwclk(int set, struct rtc_time *t)
| ^~~~~~~~~~
arch/m68k/sun3x/config.c:30:6: warning: no previous prototype for ‘sun3_leds’ [-Wmissing-prototypes]
30 | void sun3_leds(unsigned char byte)
| ^~~~~~~~~
Fix this by introducing a new header file "sun3.h" for holding the
prototypes of functions implemented in arch/m68k/sun3/ and
arch/m68k/sun3x/.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/87856ef9ef8955f459fb691faca921c0a688bc80.1694613528.git.geert@linux-m68k.org
When building with W=1:
arch/m68k/sun3/config.c: In function ‘sun3_bootmem_alloc’:
arch/m68k/sun3/config.c:110:23: warning: variable ‘start_page’ set but not used [-Wunused-but-set-variable]
112 | unsigned long start_page;
| ^~~~~~~~~~
Fix this by removing the variable and the assignment, now the last user
is gone.
Fixes: 1008a11590 ("m68k: switch to MEMBLOCK + NO_BOOTMEM")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/361c4562350c8739f6c0da34f7c416b2678fae7c.1694613528.git.geert@linux-m68k.org
When building with W=1:
arch/m68k/sun3/sun3dvma.c: In function ‘free_baddr’:
arch/m68k/sun3/sun3dvma.c:208:23: warning: variable ‘orig_baddr’ set but not used [-Wunused-but-set-variable]
196 | unsigned long orig_baddr;
| ^~~~~~~~~~
Fix this by removing the unused variable and assignment, which were
futile since their introduction in v2.4.5.2.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/c705b6186241dfe9a5bdcb71720b8697fa5c801f.1694613528.git.geert@linux-m68k.org
