raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-10 03:49:50 +00:00
Code Issues Projects Releases Wiki Activity
1,370,446 Commits 104 Branches 108 Tags
8b7ab8eb52b51a7058edf0035e47b281f9fc9a19
Commit Graph

33 Commits

Author SHA1 Message Date
Thomas Zimmermann
1260ed7779 Merge drm/drm-fixes into drm-misc-fixes 
Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
 2025-04-08 10:15:47 +02:00
Jacek Lawrynowicz
6b4568b675 accel/ivpu: Fix warning in ivpu_ipc_send_receive_internal() 
Warn if device is suspended only when runtime PM is enabled.
Runtime PM is disabled during reset/recovery and it is not an error
to use ivpu_ipc_send_receive_internal() in such cases.

Fixes: 5eaa497411 ("accel/ivpu: Prevent recovery invocation during probe and resume")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250325114219.3739951-1-maciej.falkowski@linux.intel.com
 2025-03-31 14:18:10 +02:00
Maciej Falkowski
bc3e5f48b7 accel/ivpu: Use workqueue for IRQ handling 
Convert IRQ bottom half from the thread handler into workqueue.
This increases a stability in rare scenarios where driver on
debugging/hardening kernels processes IRQ too slow and misses
some interrupts due to it.
Workqueue handler also gives a very minor performance increase.

Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-6-maciej.falkowski@linux.intel.com
 2025-01-09 09:35:44 +01:00
Jakub Pawlak
7cb8d38a06 accel/ivpu: Add tracing for IPC/PM/JOB 
Add multiple trace points in couple of key places to enable tracing
with ftrace.

Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-31-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
 2024-10-11 12:44:39 +02:00
Jacek Lawrynowicz
1bc92a517b accel/ivpu: Remove invalid warnings 
Warn in ivpu_file_priv_put() checks a pointer that is previously
accessed. Warn in ivpu_ipc_fini() can be triggered even in valid cases
where IPC is disabled upon closing the device.

Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-25-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
 2024-10-11 12:44:39 +02:00
Karol Wachowski
5eaa497411 accel/ivpu: Prevent recovery invocation during probe and resume 
Refactor IPC send and receive functions to allow correct
handling of operations that should not trigger a recovery process.

Expose ivpu_send_receive_internal(), which is now utilized by the D0i3
entry, DCT initialization, and HWS initialization functions.
These functions have been modified to return error codes gracefully,
rather than initiating recovery.

The updated functions are invoked within ivpu_probe() and ivpu_resume(),
ensuring that any errors encountered during these stages result in a proper
teardown or shutdown sequence. The previous approach of triggering recovery
within these functions could lead to a race condition, potentially causing
undefined behavior and kernel crashes due to null pointer dereferences.

Fixes: 45e45362e0 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
 2024-10-11 12:44:39 +02:00
Karol Wachowski
3886f9440a accel/ivpu: Print JSM message result in case of error 
Change debug message to error level in case of receiving
non-successful result of JSM message.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
 2024-10-11 12:44:39 +02:00
Tomasz Rusinowicz
5e162f872d accel/ivpu: Add FW state dump on TDR 
Send JSM state dump message at the beginning of TDR handler. This allows
FW to collect debug info in the FW log before the state of the NPU is
lost allowing to analyze the cause of a TDR.

Wait a predefined timeout (10 ms) so the FW has a chance to write debug
logs. We cannot wait for JSM response at this point because IRQs are
already disabled before TDR handler is invoked.

Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
 2024-10-11 12:44:38 +02:00
Maciej Falkowski
b7ed87ffc7 accel/ivpu: Abort jobs of faulty context 
Abort all jobs that belong to contexts generating MMU faults in order
to avoid flooding host with MMU IRQs.

Jobs are cancelled with:
  - SSID_RELEASE command when OS scheduling is enabled
  - DESTROY_CMDQ command when HW scheduling is enabled

Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com>
Co-developed-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-3-jacek.lawrynowicz@linux.intel.com
 2024-06-14 09:12:11 +02:00
Jacek Lawrynowicz
2f7ffb06d6 accel/ivpu: Replace wake_thread with kfifo 
Use kfifo to pass IRQ sources to IRQ thread so it will be possible to
use IRQ thread by multiple IRQ types.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-4-jacek.lawrynowicz@linux.intel.com
 2024-05-17 08:30:27 +02:00
Wachowski, Karol
8a27ad81f7 accel/ivpu: Split IP and buttress code 
The NPU device consists of two parts: NPU buttress and NPU IP.
Buttress is a platform specific part that integrates the NPU IP with
the CPU.
NPU IP is the platform agnostic part that does the inference.

This separation enables support for multiple platforms using
a single NPU IP, so for example NPU IP 37XX could be integrated into
MTL and LNL platforms.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-3-jacek.lawrynowicz@linux.intel.com
 2024-05-17 08:30:24 +02:00
Wachowski, Karol
f0cf7ffcd0 accel/ivpu: Check return code of ipc->lock init 
Return value of drmm_mutex_init(ipc->lock) was unchecked.

Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
 2024-04-08 10:53:19 +02:00
Wachowski, Karol
42328003ec accel/ivpu: Refactor BO creation functions 
Rename BO allocate/create functions, so the code is more consistent.
There are now two matching buffer creation functions:
  - ivpu_bo_create_ioctl() - create a BO from user space
  - ivpu_bo_create() - create a BO from kernel space

ivpu_bo_alloc() is now only used to allocate struct ivpu_bo which better
matches its name.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-8-jacek.lawrynowicz@linux.intel.com
 2024-02-19 10:52:35 +01:00
Jacek Lawrynowicz
27d19268cf accel/ivpu: Improve recovery and reset support 
- Synchronize job submission with reset/recovery using reset_lock
  - Always print recovery reason and call diagnose_failure()
  - Don't allow for autosupend during recovery
  - Prevent immediate autosuspend after reset/recovery
  - Prevent force_recovery for issuing TDR when device is suspended
  - Reset VPU instead triggering recovery after changing debugfs params

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-4-jacek.lawrynowicz@linux.intel.com
 2024-01-25 10:17:37 +01:00
Jacek Lawrynowicz
3b434a3445 accel/ivpu: Use threaded IRQ to handle JOB done messages 
Remove job_done thread and replace it with generic callback based
mechanism.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com
 2023-11-16 13:41:49 +01:00
Stanislaw Gruszka
b3c10b71a6 accel/ivpu: Do not use cons->aborted for job_done_thread 
This allow to simplify ivpu_ipc_receive() as now we do not have
to process all messages in aborted state - they will be freed in
ivpu_ipc_consumer_del().

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-4-jacek.lawrynowicz@linux.intel.com
 2023-11-16 13:41:49 +01:00
Stanislaw Gruszka
12fbf8ac39 accel/ivpu: Do not use irqsave in ivpu_ipc_dispatch 
ivpu_ipc_dispatch is always called with irqs disabled. Add lockdep
assertion and remove unneeded _irqsave/_irqrestore.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-3-jacek.lawrynowicz@linux.intel.com
 2023-11-16 13:41:49 +01:00
Stanislaw Gruszka
043a2d5d71 accel/ivpu: Rename cons->rx_msg_lock 
Now the cons->rx_msg_lock also protects 'abort' field so rename the lock.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-2-jacek.lawrynowicz@linux.intel.com
 2023-11-16 13:41:33 +01:00
Maxime Ripard
3bf3e21c15 Merge drm/drm-next into drm-misc-next 
Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2023-11-15 10:56:44 +01:00
Jacek Lawrynowicz
c015fb6d01 accel/ivpu: Fix compilation with CONFIG_PM=n 
Use pm_runtime_status_suspended() instead of dev->power.runtime_status
field that is not available without PM.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/all/20231106130827.1600948-1-jacek.lawrynowicz@linux.intel.com
 2023-11-07 09:16:50 +01:00
Stanislaw Gruszka
ba6b035daa accel/ivpu: Abort pending rx ipc on reset 
Waking up process, which wait for particular condition, will go to
sleep again on wake_up() if the condition is not met. Add abort flag
to wake up IPC receivers, which will finish with -ECANCELED error.

This is only needed for reset, run time power management prevent to
suspend VPU when there is pending IPC processing or pending job.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-5-stanislaw.gruszka@linux.intel.com
 2023-10-31 16:25:03 +01:00
Stanislaw Gruszka
57c7e3e480 accel/ivpu: Stop job_done_thread on suspend 
Stop job_done thread when going to suspend. Use kthread_park() instead
of kthread_stop() to avoid memory allocation and potential failure
on resume.

Use separate function as thread wake up condition. Use spin lock to assure
rx_msg_list is properly protected against concurrent access. This avoid
race condition when the rx_msg_list list is modified and read in
ivpu_ipc_recive() at the same time.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-4-stanislaw.gruszka@linux.intel.com
 2023-10-31 16:14:17 +01:00
Dave Airlie
915b6d034b Merge tag 'drm-misc-next-2023-10-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next 
drm-misc-next for v6.7-rc1:

drm-misc-next-2023-10-19 + following:

UAPI Changes:

Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.

Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.

Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
 2023-10-31 10:47:50 +10:00
Karol Wachowski
45e45362e0 accel/ivpu: Introduce ivpu_ipc_send_receive_active() 
Split ivpu_ipc_send_receive() implementation to have a version
that does not call pm_runtime_resume_and_get(). That implementation
can be invoked when device is up and runtime resume is prohibited
(for example at the end of boot sequence).

The new function will be used for D0i3 entry IPC message addition
in the separate change.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com
 2023-10-30 11:06:12 +01:00
Dave Airlie
7cd62eab9b BackMerge tag 'v6.6-rc7' into drm-next 
This is needed to add the msm pr which is based on a higher base.

Signed-off-by: Dave Airlie <airlied@redhat.com>
 2023-10-23 18:20:06 +10:00
Krystian Pradzynski
a3cd664e7f accel/ivpu: Print IPC type string instead of number 
Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC
message. This will make reading logs and debugging IPC issues easier.

Co-developed-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-5-stanislaw.gruszka@linux.intel.com
 2023-10-23 09:00:28 +02:00
Krystian Pradzynski
276e4834b7 accel/ivpu: Use ratelimited warn and err in IPC/JSM 
Quite often during test corner cases IPC, JSM functions can flood
dmesg with warn or err messages. With that lost dmesg history.
Change warn, err to ratelimited versions in IPC, JSM to suppress
dmesg spam occurrence during fail test scenarios.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-2-stanislaw.gruszka@linux.intel.com
 2023-10-23 08:55:11 +02:00
Jacek Lawrynowicz
a18f172489 accel/ivpu: Add ivpu_bo_vaddr() and ivpu_bo_size() 
Use:
  - ivpu_bo_vaddr(bo) instead of bo->kvaddr
  - ivpu_bo_size(bo) instead of bo->base.size

This is a preparation for switch to a drm_gem_shmem_object as a base for
ivpu_bo, where:
  - bo->kvaddr becomes bo->base.vaddr
  - bo->base.size becomes bo->base.base.size

Using ivpu_bo_vaddr() and ivpu_bo_size() increases the readability of
the code.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-9-stanislaw.gruszka@linux.intel.com
 2023-10-12 12:54:51 +02:00
Stanislaw Gruszka
b0873eead1 accel/ivpu: Do not use wait event interruptible 
If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:

[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0

To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.

Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
 2023-09-27 07:39:46 +02:00
Jacek Lawrynowicz
0a9cd7924e accel/ivpu: Remove duplicated error messages 
Reduce the number of error messages per single failure in
ivpu_dev_init() and ivpu_probe().

Most error messages are already printed by functions called
from ivpu_dev_init(). Add missed error prints in ivpu_ipc_init()
and ivpu_mmu_context_init().

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-3-stanislaw.gruszka@linux.intel.com
 2023-09-04 11:01:26 +02:00
Stanislaw Gruszka
b563e47957 accel/ivpu: Do not use mutex_lock_interruptible 
If we get signal when waiting for the mmu->lock we do not invalidate
current MMU configuration that might result in undefined behavior.

Additionally there is little or no benefit on break waiting for
ipc->lock. In current code base, we keep this lock for short periods.

Fixes: 263b2ba5fc ("accel/ivpu: Add Intel VPU MMU support")
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-2-stanislaw.gruszka@linux.intel.com
 2023-06-08 08:15:46 +02:00
Jacek Lawrynowicz
852be13f3b accel/ivpu: Add PM support 
- Implement cold and warm firmware boot flows
  - Add hang recovery support
  - Add runtime power management support

Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-8-jacek.lawrynowicz@linux.intel.com
 2023-01-19 11:12:08 +01:00
Jacek Lawrynowicz
5d7422cfb4 accel/ivpu: Add IPC driver and JSM messages 
The IPC driver is used to send and receive messages to/from firmware
running on the VPU.

The only supported IPC message format is Job Submission Model (JSM)
defined in vpu_jsm_api.h header.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-5-jacek.lawrynowicz@linux.intel.com
 2023-01-19 11:11:45 +01:00