Certain operations on memory, such as memory repair, are permitted
only when the address and other attributes for the operation are
from the current boot. This is determined by checking whether the
memory attributes for the operation match those in the CXL gen_media
or CXL DRAM memory event records reported during the current boot.
The CXL event records must be backed up because they are cleared
in the hardware after being processed by the kernel.
Support is added for storing CXL gen_media or CXL DRAM memory event
records in xarrays. Old records are deleted when they expire or when
there is an overflow and which depends on platform correctly report
Event Record Timestamp field of CXL spec Table 8-55 Common Event
Record Format.
Additionally, helper functions are implemented to find a matching
record in the xarray storage based on the memory attributes and
repair type.
Add validity check, when matching attributes for sparing, using
the validity flag in the DRAM event record, to ensure that all
required attributes for a requested repair operation are valid and
set.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-7-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add CXL Features support. Setup code for enabling in kernel usage of CXL
Features. Expecting EDAC/RAS to utilize CXL Features in kernel for
things such as memory sparing. Also prepartion for enabling of CXL FWCTL
support to issue allowed Features from user space.
CONFIG_CXL_MCE depends on CONFIG_MEMORY_FAILURE, if
CONFIG_CXL_MCE is not set, devm_cxl_register_mce_notifier() will return
an -EOPNOTSUPP, it will cause cxl_mem_state_create() failure , and then
cxl pci device probing failed. In this case, it should not break cxl pci
device probing.
Add a checking in cxl_mem_state_create() to check if the returned value
of devm_cxl_register_mce_notifier() is -EOPNOTSUPP, if yes, just output
a warning log, do not let cxl_mem_state_create() return an error.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250227101848.388595-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add support for GPF flows. It is found that the CXL specification
around this to be a bit too involved from the driver side. And while
this should really all handled by the hardware, this patch takes
things with a grain of salt.
Upon respective port enumeration, both phase timeouts are set to
a max of 20 seconds, which is the NMI watchdog default for lockup
detection. The premise is that the kernel does not have enough
information to set anything better than a max across the board
and hope devices finish their GPF flows within the platform energy
budget.
Timeout detection is based on dirty Shutdown semantics. The driver
will mark it as dirty, expecting that the device clear it upon a
successful GPF event. The admin may consult the device Health and
check the dirty shutdown counter to see if there was a problem
with data integrity.
[ davej: Explicitly set return to 0 in update_gpf_port_dvsec() ]
[ davej: Add spec reference for 'struct cxl_mbox_set_shutdown_state_in ]
[ davej: Fix 0-day reported issue ]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250124233533.910535-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Below is a setup with extended linear cache configuration with an example
layout of memory region shown below presented as a single memory region
consists of 256G memory where there's 128G of DRAM and 128G of CXL memory.
The kernel sees a region of total 256G of system memory.
128G DRAM 128G CXL memory
|-----------------------------------|-------------------------------------|
Data resides in either DRAM or far memory (FM) with no replication. Hot
data is swapped into DRAM by the hardware behind the scenes. When error is
detected in one location, it is possible that error also resides in the
aliased location. Therefore when a memory location that is flagged by MCE
is part of the special region, the aliased memory location needs to be
offlined as well.
Add an mce notify callback to identify if the MCE address location is part
of an extended linear cache region and handle accordingly.
Added symbol export to set_mce_nospec() in x86 code in order to call
set_mce_nospec() from the CXL MCE notify callback.
Link: https://lore.kernel.org/linux-cxl/668333b17e4b2_5639294fd@dwillia2-xfh.jf.intel.com.notmuch/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The pending efforts to add CXL Accelerator (type-2) device [1], and
Dynamic Capacity (DCD) support [2], tripped on the
no-longer-fit-for-purpose design in the CXL subsystem for tracking
device-physical-address (DPA) metadata. Trip hazards include:
- CXL Memory Devices need to consider a PMEM partition, but Accelerator
devices with CXL.mem likely do not in the common case.
- CXL Memory Devices enumerate DPA through Memory Device mailbox
commands like Partition Info, Accelerators devices do not.
- CXL Memory Devices that support DCD support more than 2 partitions.
Some of the driver algorithms are awkward to expand to > 2 partition
cases.
- DPA performance data is a general capability that can be shared with
accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
suitable.
- Hardcoded assumptions around the PMEM partition always being index-1
if RAM is zero-sized or PMEM is zero sized.
- 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
memory property, it should be phased in favor of a partition id and
the memory property comes from the partition info.
Towards cleaning up those issues and allowing a smoother landing for the
aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
way for Memory Devices and Accelerators to initialize the DPA information
in 'struct cxl_dev_state'.
For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
get the new data structure initialized, and cleanup some qos_class init.
Follow on patches will go further to use the new data structure to
cleanup algorithms that are better suited to loop over all possible
partitions.
cxl_dpa_setup() follows the locking expectations of mutating the device
DPA map, and is suitable for Accelerator drivers to use. Accelerators
likely only have one hardcoded 'ram' partition to convey to the
cxl_core.
Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305827.668823.13978794102080021276.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for consolidating all DPA partition information into an
array of DPA metadata, introduce helpers that hide the layout of the
current data. I.e. make the eventual replacement of ->ram_res,
->pmem_res, ->ram_perf, and ->pmem_perf with a new DPA metadata array a
no-op for code paths that consume that information, and reduce the noise
of follow-on patches.
The end goal is to consolidate all DPA information in 'struct
cxl_dev_state', but for now the helpers just make it appear that all DPA
metadata is relative to @cxlds.
As the conversion to generic partition metadata walking is completed,
these helpers will naturally be eliminated, or reduced in scope.
Cc: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305238.668823.16553986866633608541.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Series to fix XOR math for DPA to SPA translation
- Refactor and fold cxl_trace_hpa() into cxl_dpa_to_hpa()
- Complete DPA->HPA->SPA translation and correct XOR translation issue
- Add new method to verify a CXL target position
- Remove old method of CXL target position verifiation
User space may need to know which region, if any, maps the DPAs
(device physical addresses) reported in a cxl_general_media or
cxl_dram event. Since the mapping can change, the kernel provides
this information at the time the event occurs. This informs user
space that at event <timestamp> this <region> mapped this <DPA>
to this <HPA>.
Add the same region info that is included in the cxl_poison trace
event: the DPA->HPA translation, region name, and region uuid.
The new fields are inserted in the trace event and no existing
fields are modified. If the DPA is not mapped, user will see:
hpa=ULLONG_MAX, region="", and uuid=0
This work must be protected by dpa_rwsem & region_rwsem since
it is looking up region mappings.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/dd8d708b7a7ebfb64a27020a5eb338091336b34d.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A recent change to cxl_mem_get_records_log() [1] highlighted a subtle
nuance of looping calls to cxl_internal_send_cmd(), i.e. that
cxl_internal_send_cmd() modifies the 'size_out' member of the @mbox_cmd
argument. That mechanism is useful for communicating underflow, but it
is unwanted when reusing @mbox_cmd for a subsequent submission. It turns
out that cxl_xfer_log() avoids this scenario by always redefining
@mbox_cmd each iteration.
Update cxl_mem_get_records_log() and cxl_mem_get_poison() to follow the
same style as cxl_xfer_log(), i.e. re-define @mbox_cmd each iteration.
The cxl_mem_get_records_log() change is just a style fixup, but the
cxl_mem_get_poison() change is a potential fix, per Alison [2]:
Poison list retrieval can hit this case if the MORE flag is set and
a follow on read of the list delivers more records than the previous
read. ie. device gives one record, sets the _MORE flag, then gives 5.
Not an urgent fix since this behavior has not been seen in the wild,
but worth tracking as a fix.
Cc: Kwangjin Ko <kwangjin.ko@sk.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Fixes: ed83f7ca39 ("cxl/mbox: Add GET_POISON_LIST mailbox command")
Link: http://lore.kernel.org/r/20240402081404.1106-2-kwangjin.ko@sk.com [1]
Link: http://lore.kernel.org/r/ZhAhAL/GOaWFrauw@aschofie-mobl2 [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/171235441633.2716581.12330082428680958635.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Since mbox_cmd.size_out is overwritten with the actual output size in
the function below, it needs to be initialized every time.
cxl_internal_send_cmd -> __cxl_pci_mbox_send_cmd
Problem scenario:
1) The size_out variable is initially set to the size of the mailbox.
2) Read an event.
- size_out is set to 160 bytes(header 32B + one event 128B).
- Two event are created while reading.
3) Read the new *two* events.
- size_out is still set to 160 bytes.
- Although the value of out_len is 288 bytes, only 160 bytes are
copied from the mailbox register to the local variable.
- record_count is set to 2.
- Accessing records[1] will result in reading incorrect data.
Fixes: 6ebe28f9ec ("cxl/mem: Read, trace, and clear events on driver load")
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kwangjin Ko <kwangjin.ko@sk.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The dev_dbg info for Clear Event Records mailbox command would report
the handle of the next record to clear not the current one.
This was because the index 'i' had incremented before printing the
current handle value.
Fixes: 6ebe28f9ec ("cxl/mem: Read, trace, and clear events on driver load")
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Pick up the CPER to CXL driver integration work for v6.8. Some
additional cleanup of cper_estatus_print() messages is needed, but that
is to be handled incrementally.
If the firmware has configured CXL event support to be firmware first
the OS can process those events through CPER records. The CXL layer has
unique DPA to HPA knowledge and standard event trace parsing in place.
CPER records contain Bus, Device, Function information which can be used
to identify the PCI device which is sending the event.
Change the PCI driver registration to include registration of a CXL
CPER callback to process events through the trace subsystem.
Use new scoped based management to simplify the handling of the PCI
device object.
Tested-by: Smita-Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita-Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-9-1bb8a4ca2c7a@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
[djbw: use new pci_dev guard, flip init order]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL CPER events are identified by the CPER Section Type GUID. The GUID
correlates with the CXL UUID for the event record. It turns out that a
CXL CPER record is a strict subset of the CXL event record, only the
UUID header field is chopped.
In order to unify handling between native and CPER flavors of CXL
events, prepare the code for the UUID to be passed in rather than
inferred from the record itself.
Later patches update the passed in record to only refer to the common
data between the formats.
Pass the UUID explicitly to each trace event to be able to remove the
UUID from the event structures.
Originally it was desirable to remove the UUID from the well known event
because the UUID value was redundant. However, the trace API was
already in place.[1]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/all/36f2d12934d64a278f2c0313cbd01abc@huawei.com [1]
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-1-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Restricted CXL Host (RCH) Error Handling undoes the topology munging of
CXL 1.1 to enabled some AER recovery, and lands some base infrastructure
for handling Root-Complex-Event-Collectors (RCECs) with CXL. Include
this long running series finally for v6.7.
