CXL spec 3.1 section 8.2.9.2.1.3 Table 8-47, Memory Module Event Record
has updated with following new fields and new info for Device Event Type
and Device Health Information fields.
1. Validity Flags
2. Component Identifier
3. Device Event Sub-Type
Update the Memory Module event record and Memory Module trace event for
the above spec changes. The new fields are inserted in logical places.
Example trace print of cxl_memory_module trace event,
cxl_memory_module: memdev=mem3 host=0000:0f:00.0 serial=3 log=Fatal : \
time=371709344709 uuid=fe927475-dd59-4339-a586-79bab113b774 len=128 \
flags='0x1' handle=2 related_handle=0 maint_op_class=0 \
maint_op_sub_class=0 : event_type='Temperature Change' \
event_sub_type='Unsupported Config Data' \
health_status='MAINTENANCE_NEEDED|REPLACEMENT_NEEDED' \
media_status='All Data Loss in Event of Power Loss' as_life_used=0x3 \
as_dev_temp=Normal as_cor_vol_err_cnt=Normal as_cor_per_err_cnt=Normal \
life_used=8 device_temp=3 dirty_shutdown_cnt=33 cor_vol_err_cnt=25 \
cor_per_err_cnt=45 validity_flags='COMPONENT|COMPONENT PLDM FORMAT' \
comp_id=03 74 c5 08 9a 1a 0b fc d2 7e 2f 31 9b 3c 81 4d \
comp_id_pldm_valid_flags='Resource ID' \
pldm_entity_id=0x00 pldm_resource_id=fc d2 7e 2f
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250111091756.1682-6-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec rev 3.1 section 8.2.9.2.1.1 Table 8-45, General Media Event
Record has updated with following new fields and new types for Memory
Event Type and Transaction Type fields.
1. Advanced Programmable Corrected Memory Error Threshold Event Flags
2. Corrected Memory Error Count at Event
3. Memory Event Sub-Type
The format of component identifier has changed (CXL spec 3.1 section
8.2.9.2.1 Table 8-44).
Update the general media event record and general media trace event for
the above spec changes. The new fields are inserted in logical places.
Example trace log of cxl_general_media trace event,
cxl_general_media: memdev=mem0 host=0000:0f:00.0 serial=3 log=Fatal : \
time=156831237413 uuid=fbcd0a77-c260-417f-85a9-088b1621eba6 len=128 \
flags='0x1' handle=1 related_handle=0 maint_op_class=2 \
maint_op_sub_class=4 : dpa=30d40 dpa_flags='' \
descriptor='UNCORRECTABLE_EVENT|THRESHOLD_EVENT|POISON_LIST_OVERFLOW' \
type='TE State Violation' sub_type='Media Link Command Training Error' \
transaction_type='Host Inject Poison' channel=3 rank=33 device=5 \
validity_flags='CHANNEL|RANK|DEVICE|COMPONENT|COMPONENT PLDM FORMAT' \
comp_id=03 74 c5 08 9a 1a 0b fc d2 7e 2f 31 9b 3c 81 4d \
comp_id_pldm_valid_flags='PLDM Entity ID | Resource ID' \
pldm_entity_id=74 c5 08 9a 1a 0b pldm_resource_id=fc d2 7e 2f \
hpa=ffffffffffffffff region= \
region_uuid=00000000-0000-0000-0000-000000000000 \
cme_threshold_ev_flags='Corrected Memory Errors in Multiple Media \
Components|Exceeded Programmable Threshold' cme_count=120
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250111091756.1682-4-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add Component Identifier formatting for CXL spec rev 3.1, Section
8.2.9.2.1, Table 8-44.
Examples for Component Identifier format in trace log,
validity_flags='CHANNEL|RANK|DEVICE|COMPONENT|COMPONENT PLDM FORMAT' \
comp_id=03 74 c5 08 9a 1a 0b fc d2 7e 2f 31 9b 3c 81 4d \
comp_id_pldm_valid_flags='PLDM Entity ID | Resource ID' \
pldm_entity_id=74 c5 08 9a 1a 0b pldm_resource_id=fc d2 7e 2f \
validity_flags='COMPONENT|COMPONENT PLDM FORMAT' \
comp_id=02 74 c5 08 9a 1a 0b fc d2 7e 2f 31 9b 3c 81 4d \
comp_id_pldm_valid_flags='Resource ID' \
pldm_entity_id=0x00 pldm_resource_id=fc d2 7e 2f
If the validity flags for component ID/component ID format or PLDM ID or
resource ID are not set, then pldm_entity_id=0x00 or pldm_resource_id=0x00
would be printed.
Component identifier formatting is used in the subsequent patches.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250111091756.1682-3-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec rev 3.0 section 8.2.9.2.1.2 defines the DRAM Event Record.
Fix decode memory event type field of DRAM Event Record.
For e.g. if value is 0x1 it will be reported as an Invalid Address
(General Media Event Record - Memory Event Type) instead of Scrub Media
ECC Error (DRAM Event Record - Memory Event Type) and so on.
Fixes: 2d6c1e6d60 ("cxl/mem: Trace DRAM Event Record")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20241014143003.1170-1-shiju.jose@huawei.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Series to fix XOR math for DPA to SPA translation
- Refactor and fold cxl_trace_hpa() into cxl_dpa_to_hpa()
- Complete DPA->HPA->SPA translation and correct XOR translation issue
- Add new method to verify a CXL target position
- Remove old method of CXL target position verifiation
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
User space may need to know which region, if any, maps the DPAs
(device physical addresses) reported in a cxl_general_media or
cxl_dram event. Since the mapping can change, the kernel provides
this information at the time the event occurs. This informs user
space that at event <timestamp> this <region> mapped this <DPA>
to this <HPA>.
Add the same region info that is included in the cxl_poison trace
event: the DPA->HPA translation, region name, and region uuid.
The new fields are inserted in the trace event and no existing
fields are modified. If the DPA is not mapped, user will see:
hpa=ULLONG_MAX, region="", and uuid=0
This work must be protected by dpa_rwsem & region_rwsem since
it is looking up region mappings.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/dd8d708b7a7ebfb64a27020a5eb338091336b34d.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The length of Physical Address in General Media and DRAM event
records is 64-bit, so the field mask for extracting the DPA should
be 64-bit also, otherwise the trace event reports DPA's with the
upper 32 bits of a DPA address masked off. If users do DPA-to-HPA
translations this could lead to incorrect page retirement decisions.
Use GENMASK_ULL() for CXL_DPA_MASK to get all the DPA address bits.
Tidy up CXL_DPA_FLAGS_MASK by using GENMASK() to only mask the exact
flag bits.
These bits are defined as part of the event record physical address
descriptions of General Media and DRAM events in CXL Spec 3.1
Section 8.2.9.2 Events.
Fixes: d54a531a43 ("cxl/mem: Trace General Media Event Record")
Co-developed-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/2867fc43c57720a4a15a3179431829b8dbd2dc16.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The TP_STRUCT__entry that gets assigned the region name, or an
empty string if no region is present, is erroneously initialized
to the cxl_region pointer. It needs to be properly initialized
otherwise it's length is wrong and garbage chars can appear in
the kernel trace output: /sys/kernel/tracing/trace
The bad initialization was due in part to a naming conflict with
the parameter: struct cxl_region *region. The field 'region' is
already exposed externally as the region name, so changing that
to something logical, like 'region_name' is not an option. Instead
rename the internal only struct cxl_region to the commonly used
'cxlr'.
Impact is that tooling depending on that trace data can miss
picking up a valid event when searching by region name. The
TP_printk() output, if enabled, does emit the correct region
names in the dmesg log.
This was found during testing of the cxl-list option to report
media-errors for a region.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: stable@vger.kernel.org
Fixes: ddf49d57b8 ("cxl/trace: Add TRACE support for CXL media-error records")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
CXL CPER events are identified by the CPER Section Type GUID. The GUID
correlates with the CXL UUID for the event record. It turns out that a
CXL CPER record is a strict subset of the CXL event record, only the
UUID header field is chopped.
In order to unify handling between native and CPER flavors of CXL
events, prepare the code for the UUID to be passed in rather than
inferred from the record itself.
Later patches update the passed in record to only refer to the common
data between the formats.
Pass the UUID explicitly to each trace event to be able to remove the
UUID from the event structures.
Originally it was desirable to remove the UUID from the well known event
because the UUID value was redundant. However, the trace API was
already in place.[1]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/all/36f2d12934d64a278f2c0313cbd01abc@huawei.com [1]
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-1-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The cxl_poison trace event allows users to view the history of poison
list reads. With the addition of inject and clear poison capabilities,
users will expect similar tracing.
Add trace types 'Inject' and 'Clear' to the cxl_poison trace_event and
trace successful operations only.
If the driver finds that the DPA being injected or cleared of poison
is mapped in a region, that region info is included in the cxl_poison
trace event. Region reconfigurations can make this extra info useless
if the debug operations are not carefully managed.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/e20eb7c3029137b480ece671998c183da0477e2e.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The trace points were written to take a struct device input for the
trace. In CXL multiple device objects are associated with each CXL
hardware device. Using different device objects in the trace point can
lead to confusion for users.
The PCIe device is nice to have, but the user space tooling relies on
the memory device naming. It is better to have those device names
reported.
Change all trace points to take struct cxl_memdev as a standard and
report that name.
Furthermore, standardize on the name 'memdev' in both
/sys/kernel/tracing/trace and cxl-cli monitor output.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20230208-cxl-event-names-v2-1-fca130c2c68b@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL devices have multiple event logs which can be queried for CXL event
records. Devices are required to support the storage of at least one
event record in each event log type.
Devices track event log overflow by incrementing a counter and tracking
the time of the first and last overflow event seen.
Software queries events via the Get Event Record mailbox command; CXL
rev 3.0 section 8.2.9.2.2 and clears events via CXL rev 3.0 section
8.2.9.2.3 Clear Event Records mailbox command.
If the result of negotiating CXL Error Reporting Control is OS control,
read and clear all event logs on driver load.
Ensure a clean slate of events by reading and clearing the events on
driver load.
The status register is not used because a device may continue to trigger
events and the only requirement is to empty the log at least once. This
allows for the required transition from empty to non-empty for interrupt
generation. Handling of interrupts is in a follow on patch.
The device can return up to 1MB worth of event records per query.
Allocate a shared large buffer to handle the max number of records based
on the mailbox payload size.
This patch traces a raw event record and leaves specific event record
type tracing to subsequent patches. Macros are created to aid in
tracing the common CXL Event header fields.
Each record is cleared explicitly. A clear all bit is specified but is
only valid when the log overflows.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20221216-cxl-ev-log-v7-1-2316a5c8f7d8@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL is using tracepoints for reporting RAS capability register payloads
for AER events, and has plans to use tracepoints for the output payload
of Get Poison List and Get Event Records commands. For organization
purposes it would be nice to keep those all under a single + local CXL
trace system. This also organization also potentially helps in the
future when CXL drivers expand beyond generic memory expanders, however
that would also entail a move away from the expander-specific
cxl_dev_state context, save that for later.
Note that the powerpc-specific drivers/misc/cxl/ also defines a 'cxl'
trace system, however, it is unlikely that a single platform will ever
load both drivers simultaneously.
Cc: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167051869176.436579.9728373544811641087.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
