Pull EDAC updates from Borislav Petkov:
- ie31200: Add support for Raptor Lake-S and Alder Lake-S compute dies
- Rework how RRL registers per channel tracking is done in order to
support newer hardware with different RRL configurations and refactor
that code. Add support for Granite Rapids server
- i10nm: explicitly set RRL modes to fix any wrong BIOS programming
- Properly save and restore Retry Read error Log channel configuration
info on Intel drivers
- igen6: Handle correctly the case of fused off memory controllers on
Arizona Beach and Amston Lake SoCs before adding support for them
- the usual set of fixes and cleanups
* tag 'edac_updates_for_v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/bluefield: Don't use bluefield_edac_readl() result on error
EDAC/i10nm: Fix the bitwise operation between variables of different sizes
EDAC/ie31200: Add two Intel SoCs for EDAC support
EDAC/{skx_common,i10nm}: Add RRL support for Intel Granite Rapids server
EDAC/{skx_common,i10nm}: Refactor show_retry_rd_err_log()
EDAC/{skx_common,i10nm}: Refactor enable_retry_rd_err_log()
EDAC/{skx_common,i10nm}: Structure the per-channel RRL registers
EDAC/i10nm: Explicitly set the modes of the RRL register sets
EDAC/{skx_common,i10nm}: Fix the loss of saved RRL for HBM pseudo channel 0
EDAC/skx_common: Fix general protection fault
EDAC/igen6: Add Intel Amston Lake SoCs support
EDAC/igen6: Add Intel Arizona Beach SoCs support
EDAC/igen6: Skip absent memory controllers
Raptor Lake-S SoCs notify correctable memory errors via CMCI (Corrected
Machine Check Interrupt). Switch Raptor Lake-S EDAC support from polling
to interrupt mode by registering the callback to the MCE decode notifier
chain.
Note that as Raptor Lake-S SoCs may not recover from uncorrectable memory
errors, the system will hang as soon as this type of error occurs, and the
registered callback on the MCE decode chain will not be executed. This is
the expected behavior.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-12-qiuxu.zhuo@intel.com
The Intel Raptor Lake-S SoC contains two memory controllers with DDR5
memory type and out-of-band ECC capability. The resource definitions of
the memory controller are different from previous generations. One notable
difference is that the PCI ERRSTS register is deprecated and is not used
to indicate the presence of errors or to clear the MMIO-mapped ECC error
log regsiters.
Extend the ie31200_edac driver to support multiple memory controllers,
add a resource configuration table and use an MSR register to clear the
ECC error log registers to provide EDAC support for Raptor Lake-S SoCs.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-11-qiuxu.zhuo@intel.com
The current dimm_data structure contains encoded DIMM information,
which needs to be decoded for a given SoC when it is used. Make it
contain decoded information when it's initialized so that the places
where it is used do not need to decode it again, thereby simplifying
the code.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-8-qiuxu.zhuo@intel.com
The resources such as MMIO, register offset, register mask, memory DIMM
information, ECC error log location, etc., of the memory controller, and
the number of memory controllers can be device-ID-specific. It requires
adding numerous 'if (device_id == new_id)' special handling cases to the
code to support a new SoC.
Make these kinds of resources configurable and separate them from the code
to facilitate the addition of new SoC support.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-7-qiuxu.zhuo@intel.com
gcc-14 produces a bogus warning in some configurations:
drivers/edac/ie31200_edac.c: In function 'ie31200_probe1.isra':
drivers/edac/ie31200_edac.c:412:26: error: 'dimm_info' is used uninitialized [-Werror=uninitialized]
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
drivers/edac/ie31200_edac.c:412:26: note: 'dimm_info' declared here
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
I don't see any way the unintialized access could really happen here,
but I can see why the compiler gets confused by the two loops.
Instead, rework the two nested loops to only read the addr_decode
registers and then keep only one instance of the dimm info structure.
[Tony: Qiuxu pointed out that the "populate DIMM info" comment was left
behind in the refactor and suggested moving it. I deleted the comment
as unnecessry in front os a call to populate_dimm_info(). That seems
pretty self-describing.]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250122065031.1321015-1-arnd@kernel.org
They have been spreading around the subsystem by example so remove them
all.
Reported-by: Raymond Bennett <raymond.bennett@gmail.com>
Suggested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[ bp: Merge all EDAC patches into a single one. ]
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tero Kristo <t-kristo@ti.com> # ti_edac
Link: https://lkml.kernel.org/r/20200708113546.14135-1-grandmaster@al2klimov.de
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info.
Clean up this interface to only pass the mci struct and replace this
macro with a new function edac_get_dimm().
Also introduce an edac_get_dimm_by_index() function for later use.
This allows it to get a DIMM pointer only by a given index. This can
be useful if the DIMM's position within the layers of the memory
controller or the exact size of the layers are unknown.
Small style changes made for some hunks after applying the semantic
patch.
Semantic patch used:
@@ expression mci, a, b,c; @@
-EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c)
+edac_get_dimm(mci, a, b, c)
[ bp: Touchups. ]
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not implementations of default architecture code but helpers
for drivers. Move them to the place they belong to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
