The mes_v11_0_reset_hw_queue and mes_v12_0_reset_hw_queue functions were
using the wrong union type (MESAPI__REMOVE_QUEUE) when getting the offset
for api_status. Since these functions handle queue reset operations, they
should use MESAPI__RESET union instead.
This fixes the polling of API status during hardware queue reset operations
in the MES for both v11 and v12 versions.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-By: Shaoyun.liu <Shaoyun.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch from a bool to an enum and allow more options
for enforce isolation. There are now 3 modes of operation:
- Disabled (0)
- Enabled (serialization and cleaner shader) (1)
- Enabled in legacy mode (no serialization or cleaner shader) (2)
This provides better flexibility for more use cases.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it to amdgpu_mes to align with the compute and
sdma hqd masks. No functional change.
v2: rebase on new changes
v3: misc optimizations
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove MES self test as this conflicts the userqueue fence
interrupts.
v2:(Christian)
- remove the amdgpu_mes_self_test() function and any now unused code.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current MES GFX mask prevents FW to enable oversubscription. This patch
does the following:
- Fixes the mask values and adds a description for the same
- Removes the central mask setup and makes it IP specific, as it would
be different when the number of pipes and queues are different.
v2: squash in fix from Shashank
Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are noops on GFX11 for most firmware versions. KFD already
handles its own queues and they should already be unmapped at this
point so even if this runs, it's not doing anything.
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate the buffer at sw init time so we don't alloc
and free it for every suspend/resume or reset cycle.
Reviewed-by: Shaoyun.liu <shaouyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces enhancements to the handling of the cleaner
shader fence in the AMDGPU MES driver:
- The MES (Microcode Execution Scheduler) now sends a PM4 packet to the
KIQ (Kernel Interface Queue) to request the cleaner shader, ensuring
that requests are handled in a controlled manner and avoiding the
race conditions.
- The CP (Compute Processor) firmware has been updated to use a private
bus for accessing specific registers, avoiding unnecessary operations
that could lead to issues in VF (Virtual Function) mode.
- The cleaner shader fence memory address is now set correctly in the
`mes_set_hw_res_pkt` structure, allowing for proper synchronization of
the cleaner shader execution.
Cc: lin cao <lin.cao@amd.com>
Cc: Jingwen Chen <Jingwen.Chen2@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to perform the two MMIO writes in the KIQ
Setting registers programmed period, and reducing the MMIO
writes will save the driver loading time.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add implementation for MES Suspend and Resume APIs to unmap/map
all queues for GFX11. Support for GFX12 will be added when the
corresponding firmware support is in place.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait memory room until enough before writing mes packets
to avoid ring buffer overflow.
v2: squash in sched_hw_submission fix
Fixes: de32462541 ("drm/amdgpu: cleanup MES11 command submission")
Fixes: fffe347e14 ("drm/amdgpu: cleanup MES12 command submission")
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The approach of having a separate WB slot for each submission doesn't
really work well and for example breaks GPU reset.
Use a status query packet for the fence update instead since those
should always succeed we can use the fence of the original packet to
signal the state of the operation.
While at it cleanup the coding style.
Fixes: eef016ba89 ("drm/amdgpu/mes11: Use a separate fence per transaction")
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
