Shorten the gfx idle worker timeout. This is to sync with
DAL when there is no activity on the screen. Original 1
second can not sync with DAL, so DAL can not apply MALL
when the workload type is not bootup default.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI_CLASS_ACCELERATOR_PROCESSING devices won't ever be
the sysfb, so there is no need to free conflicting
apertures.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move to probe so we can check the PCI device type and
only apply the drm_firmware_drivers_only() check for
PCI DISPLAY classes. Also add a module parameter to
override the nomodeset kernel parameter as a workaround
for platforms that have this hardcoded on their kernel
command lines.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a number of systems and cloud providers out there
that have nomodeset hardcoded in their kernel parameters
to block nouveau for the nvidia driver. This prevents the
amdgpu driver from loading. Unfortunately the end user cannot
easily change this. The preferred way to block modules from
loading is to use modprobe.blacklist=<driver>. That is what
providers should be using to block specific drivers.
Drop the check to allow the driver to load even when nomodeset
is specified on the kernel command line.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always use MTYPE_UC if UNCACHED flag is specified.
This makes kernarg region uncached and it restores
usermode cache disable debug flag functionality.
Do not set MTYPE_UC for COHERENT flag, on GFX12 coherence is handled by
shader code.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In gfx_v12_0_cp_gfx_load_me_microcode_rs64(), gfx_v12_0_pfp_fini() is
incorrectly used to free 'me' field of 'gfx', since gfx_v12_0_pfp_fini()
can only release 'pfp' field of 'gfx'. The release function of 'me' field
should be gfx_v12_0_me_fini().
Fixes: 52cb80c12e ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_sriov_multi_vf_mode to replace amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev).
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dequeue retry timeout controls the interval between checks for unmet
conditions. On MI series, reduce this from 0x40 to 0x1 (~ 1 uS). The
cost of additional bandwidth consumed by CP when polling memory
shouldn't be substantial.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XGMI v4.8.0 is not used in any SOCs. Remove the associated functions.
Also, ensure get_xgmi_info callback pointer is not NULL before calling
the function.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
Fixes: 0cce5f285d ("drm/amdkfd: Check correct memory types for is_system variable")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For coherence with DCE8 et DCE10, add or move some values under sid.h
and remove duplicated from si_enums.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By wiring up sid.h in GFX6, we end up with a few duplicated defines such as
the golden registers. Let's clean this up.
[TAHITI,VERDE, HAINAN]_GB_ADDR_CONFIG_GOLDEN were defined both in sid.h
and under si_enums.h, with different values. Keep the values used under radeon
and move them under gfx_v6_0.c where they are used (as it is done under cik)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's begin the cleanup in sid.h to prevent warnings and errors when wiring
sid.h into dce_v6_0.c.
This is a bigger cleanup.
Many defines found under sid.h have already been properly moved
into the different "_d.h" and "_sh_mask.h", so they should have been
already removed from sid.h and properly linked in where needed.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of only triggering a wedged event for complete GPU resets,
trigger for ring resets. Regardless of the reset, it's useful for
userspace to know that it happened because the kernel will reject
further submissions from that app.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 2.5 uses the PG callback to enable VCN DPM which is
a global state. As such, we need to make sure all instances
are in the same state.
v2: switch to a ref count (Lijo)
v3: switch to its own idle work handler
v4: fix logic in DPG handling
Fixes: 4ce4fe2720 ("drm/amdgpu/vcn: use per instance callbacks for idle work handler")
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Encode socket id to CPER record id to be unique across devices.
v2: add pointer check for adev->smuio.funcs->get_socket_id
v2: set 0 if adev->smuio.funcs->get_socket_id is NULL
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx_v9_4_3 specifically, before regGB_ADDR_CONFIG is overwritten
in gfx hw_init it is read out to popluate the gb_addr_config_fields
in the sw_init stage, which causes mismatch.
Fix it by using the golden value in sw_init as well.
v2: This is a driver-set golden reg and keep as it is (Lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For default policy, driver will issue an RMA event when the number of
bad pages is greater than 8 physical rows, rather than reaches 8
physical rows, don't rely on threshold configurable parameters in
default mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While the entry get in svm_range_unmap_from_cpu is the last entry, and
the entry is page fault, it also need to be dropped. So for equal case,
it also need to be dropped.
v2:
Only modify the svm_range_restore_pages.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiaogang Chen<xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF cannot access the power brake feature regs.
The accesses can be skipped to avoid a dmesg warning.
v2: Remove redundant asic type check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF does not have write permissions to GRBM_CTNL.
This access can be skipped to avoid a dmesg warning.
v2: Use GC IP version check instead of asic check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To reset hung SDMA queues on GFX 9.4+ for the GFX9 family, a soft reset
must be issued through SMU. Since soft resets will reset an entire SDMA
engine, use a common KGD call to do the reset as the KGD will handle
avoiding a reset of in flight GFX and paging queues on that engine.
In addition, create a common call for all reset types to simplify
the handling of module parameter settings that block gpu resets.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
