Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
A number of values are assigned to variables but the stored values are
not used afterwards.
[HOW]
The assignments are removed. If the variables are not used, they are
removed as well.
This fixes 9 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We
need to enable the hotplug detect idle workqueue for those modes as
well.
[How]
Modify the if condition to initialize the workqueue in all IPS modes
except for DMUB_IPS_DISABLE_ALL.
Fixes: 65444581a4 ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A stream without dsc_aux should not be eliminated from
the dsc determination. Whether it needs a dsc recompute depends on
whether its mode has changed or not. Eliminating such a no-dsc stream
from the dsc determination policy will end up with inconsistencies
in the new dc_state when compared to the current dc_state,
triggering a dsc recompute that should not have happened.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently amdgpu takes backlight caps provided by the ACPI tables
on systems as is. If the firmware sets maximums that are too low
this means that users don't get a good experience.
To avoid having to maintain a quirk list of such systems, do a sanity
check on the values. Check that the spread is at least half of the
values that amdgpu would use if no ACPI table was found and if not
use the amdgpu defaults.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY]
HPD sense notification has been implemented in DMUB, which
can occur during low power states and need to be
notified from firmware to driver.
[HOW]
Define callback and register new HPD sense notification.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Backlight updates require aux and/or register access. Therefore, driver
needs to disallow IPS beforehand.
So, acquire the dc lock before calling into dc to update backlight - we
should be doing this regardless of IPS. Then, while the lock is held,
disallow IPS before calling into dc, then allow IPS afterwards (if it
was previously allowed).
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN IPS interoperates with other system idle power features, such as
Zstates.
On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.
Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.
[How]
For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It is to fix in try_disable_dsc() due to misrevert of
commit 338567d176 ("drm/amd/display: Fix MST BW calculation Regression")
[How]
Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps'
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
translate_by_source need not be set for DCN401 onwards since cursor
cursor composition comes after scaler in the hardware pipeline.
Hence offset calculation has been reworked, and this setting is not
necessary to be enabled anymore.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle power states (IPS) describe levels of power-gating within DCN. DM
and DC is responsible for ensuring that we are out of IPS before any DCN
programming happens. Any DCN programming while we're in IPS leads to
undefined behavior (mostly hangs).
Because IPS intersects with all display features, the ability to disable
IPS by default while ironing out the known issues is desired. However,
disabing it completely will cause important features such as s0ix entry
to fail.
Therefore, more granular IPS debug flags are desired.
[How]
Extend the dc debug mask bits to include the available list of IPS
debug flags.
All the flags should work as documented, with the exception of
IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in
later changes.
v2: enable docs and fix docstring format
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable
PSR and other static screen optimizations more quickly, while avoiding
stuttering issues that are accompanied by the following dmesg error:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
This also allows us to mimic how vblanking is handled by the Windows
amdgpu driver. Specifically, we wait two idle frames before disabling
the vblank timer there.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-2-hamza.mahfooz@amd.com
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be
null at line 8388, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor()
error: we previously assumed 'afb' could be null (see line 8388)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
