[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
calculate_user_regamma_coeff() and calculate_user_regamma_ramp() were
added in 2018 in commit
55a01d4023 ("drm/amd/display: Add user_regamma to color module")
but never used.
Remove them and their helpers.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously dscl_prog_data stored pointer to sharpness 1dlut table.
SPL had four pre-generated tables, one for each setup. This allowed
us to minimize number of times we had to recalculate table when
switching between setups.
However, with dual display, this becomes an issue because for a given
setup, we could have a different per app sharpness value than the
global sharpness value. So the pre-generated table will change
but both displays may point to the same table and one of them
will have the wrong sharpness setting.
[How]
Store the sharpness 1dlut table in dscl_prog_data. This ensures
that each display can have its own sharpness setting.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Whether we really enter idle optimizations are decided within DC.
Printing into dmesg before calling the DC API gives an incorrect
indication that we are entering idle optimization in cases where its
disabled manually.
To fix this, remove the print in DM and add them in DC
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC background colours that use fractional components look different if
MPC OGAM is in use vs in bypass mode. The current red and orange colours
look very similar when OGAM is in bypass, so the colours need to change
to be consistently very easy to tell apart.
[How]
Use colours that only have 0 or MAX values in each component
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
misc0, temp and split_pipe are assigned but immediately re-assigned
to other values. The early assignments are useless and are removed.
Unused variables are removed as well.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If max_downscale_src_width check fails, we exit early from
spl_calculate_scaler_params but dscl_prog_data is not fully
populated. If viewport is left at 0, it can cause crash in dml.
[How]
Call spl_set_dscl_prog_data before we exit early from
spl_calculate_scaler_params to populate dscl_prog_data
Populate taps in spl_get_optimal_number_of_taps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Flickering observed while playing 8k HEVC-10 bit video in full screen
mode with black border. We didn't support this case for subvp.
Make change to the existing check to disable subvp for this corner case.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix DP Compliance test 4.2.1.3, 4.2.2.8, 4.3.1.12, 4.3.1.13
when IPS enabled.
Original HPD detection interval is set to 5s which violates DP
compliance.
Reduce the interval parameter, such that link training can be
finished within 5 seconds.
Fixes: afca033f10 ("drm/amd/display: Add periodic detection for IPS")
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
OLED power up sequence takes an extra 150ms via hardcoded delay,
but there is a strict requirement on DisplayOn resume time.
For customer panel, remove these delays to meet target until a
cleaner solution is can be put in place.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two events to trace the beginning and the end of
amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was
placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end
than.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8a79f7cdbb)
Cc: stable@vger.kernel.org
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b47278cec)
Cc: stable@vger.kernel.org
This version brings along following fixes:
- Fix dcn401 idle optimization problem
- Fix cursor corruption on dcn35
- Fix DP LL compliance failures
- Fix SubVP Phantom VBlank End calculation
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current fullscreen check in SPL using dm_helpers is out-of-sync
with dc state. This causes an issue during minimal transition
where we pick an invalid intermediate state because the pre and
post fullscreen status are different.
[How]
Add sharpening_required flag to dc_stream_state. Use this flag to
indicate if we are in fullscreen or not. Propagate flag to SPL for
fullscreen status. Remove workaround in DML
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The phantom stream timing is copied from the main stream as most
parameters are identical, however some need to be recalculated.
Currently VBlank End is not recalculated and copied from the main
incorrectly.
[HOW]
Recalculate VBlank End for phantom stream timing.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Cursor corruption observed on USBC display with specific system setup with a
reboot. Cursor memory might still in the lightsleep state due to voltage
issue, we need program DISPCLK_R_GATE_DISABLE to avoid this issue only on
DCN35.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The function core_link_read_dpcd returns status which is not used at
all, making them useless assignments.
[HOW]
Print error messages if core_link_read_dpcd does not return DC_OK.
This fixes 2 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to clean up unnecessary asserts, one of which is an assert in
resource_is_pipe_type that fires if a pipe has no stream and still has
pointers to other pipes ("dangling state"). This gets hit because pipes
are not properly cleaned up in reset_back_end_for_pipe. When resetting a
pipe, the existing MPCC / ODM combine pointers are no longer valid,
especially when we put ODM in bypass.
[How]
- reset pipe pointers in reset_back_end_for_pipe
- remove useless code to avoid confusion
(a long time ago it had a reason to be there, not anymore)
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pass in sharpening policy through plane state from control side
[How]
Add sharpener support through dc_caps.
Add sharpen policy to plane state and move to spl_input.
Pass sharpen policy from plane state to SPL.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Code for dcn401 to calculate available MALL size for display was shared
with dcn32 and did not provide the correct result for all ASICs.
[HOW]
Add dcn401 specific function to properly calculate the available MALL
for display.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
