[Why]
Even if the mode is not supported dml2_check_mode_supported() would still return true.
This causes an unsupported mode to be programmed.
[How]
Check if the mode is supported or not and return the proper result.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
EASF coefficients are programmed to RAM and then RAM selector is toggled.
ISHARP coefficients are programmed after so they will not be in the same
RAM block
[How]
Move ISHARP programming before EASF programming
Add flag if ISHARP coefficients are updated. If so, then
force EASF coefficients programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases during topology changes, a pipe that was used to drive a
stream being removed can be re-assigned to drive a different stream. In
these cases, DSC power gating is not handled properly, leading to
situations where DSC is being setup while power gated.
[How]
- remove enable_stream_gating and disable_stream_gating for DCN401
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
When the cursor disappears/reappears on fullscreen video, there is a
short transitional period where the cursor's color matrix is using the
same format as the video plane. This sets the cursor to the wrong color
momentarily before the UI plane appears, correcting the color.
how:
Instead of defaulting to using the color space from the input plane,
default to bypass mode.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Daniel Sa <daniel.sa@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We calculate static screen wait frames based
on the current timing info in the active stream.
If stream is not initialized, then we should skip
the calculation and go with the default values.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To refactor DWB related files from dcn30 Files
[How]
Moved DWB related files from dcn30 to specific DWB folder and
updated Makefiles to fix Compilation.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Mudimela <lmudimel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Poniters, such as stream_enc and dc->bw_vbios, are null checked previously
in the same function, so Coverity warns "implies that stream_enc and
dc->bw_vbios might be null". They are used multiple times in the
subsequent code and need to be checked.
This fixes 10 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Poniters, such as dc->clk_mgr, are null checked previously in the same
function, so Coverity warns "implies that "dc->clk_mgr" might be null".
As a result, these pointers need to be checked when used again.
This fixes 10 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
OTG has new functionality to allow P-State relative to VStartup. Keepout region
for this should be configured based on DML outputs same as other global sync
params.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Make SPL library dc-independent so it can be reused by other
components
[How]
Create separate set of fixed31_32 calls in SPL
Make all inputs and outputs to SPL use primitive types
For ratios and inits, return as uint32 from SPL. So
add conversion from uint32 back to fixed point in
SPL-to-dc translate function
Reviewed-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Current logic in mcache admissibility check has flaw if
calculated number of maches are 3 or more per surface,
so sometimes the check may pass when it should fail,
and sometimes may fail when it should pass, fix the
issue and also adding additional check to make sure that
required number of mcaches per surface cannot be
higher than number of pipes + 1, used on that surface.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There are scenarios where ODM4:1 is used but the
surface is entirely outside of the first and last
ODM slice. In this case the recout.width for the
first and last slice is 0 because there's no overlap
with the surface and that ODM slice, but this causes
the x_pos for the cursor in this scenario to be
calculated incorrectly. Instead we should use the
ODM slice width instead of the recout width.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DML2.1 currently has no concept of a "blanked" stream. For cases like DPMS off,
things like UCLK p-state is always allowed, so PMO is not required to optimize
for it.
[HOW]
Add flag to DML2.1 display configuration to indicate all streams are blanked,
so certain operations and optimizations can be skipped for optimal programming
when displays are blanked.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes the VRR cannot enable after login to the desktop.
User space may call the DRM_IOCTL_MODE_GETCONNECTOR right after
the DRM_IOCTL_MODE_RMFB.
After calling DRM_IOCTL_MODE_RMFB to remove all the frame buffer
and it will cause the driver to disable the crtc and disable the
link while calling the link_set_dpms_off().
It will cause the dpcd read failed in amdgpu_dm_update_freesync_caps()
while try to get the DP_MSA_TIMING_PAR_IGNORED capability and think
the sink side does not support VRR.
[How]
Use the dpcd_caps.allow_invalid_MSA_timing_param flag instead of
reading from dpcd directly.
dpcd_caps.allow_invalid_MSA_timing_param flag is updated during HPD.
It is safe to replace the original method.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To determine which block instance to power-gate,
we look at the available pipe resource for both plane
and stream. On MPO, DSC3 was falsely powered on even
though only 1 stream path was enabled because
the resource mapping was not done correctly.
[how]
Acquire the correct DSC instance to power on / off based
on the instance of OPP which determines the backend
pipe index.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DC state create DML memory allocation fails, memory is not
deallocated subsequently, resulting in uninitialized structure
that is not NULL.
[How]
Deallocate memory if DML memory allocation fails.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is
necessary to check for null before dereferencing them.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
These pointers are null checked previously in the same function,
indicating they might be null as reported by Coverity. As a result,
they need to be checked when used again.
This fixes 3 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
"dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it
cannot be a null pointer. Let's pass a valid pointer to avoid null
dereference.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
drr_timing and subvp_pipe are initialized to null and they are not
always assigned new values. It is necessary to check for null before
dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Hotplugging with a DVI-DP dongle on pre-rdna embedded platform
working about half the time. The regression was found to be the
setting of link->type here.
[what]
Reverts fix besides the logging added.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We resync the FIFO after each pipe update in apply_ctx_to_hw.
However, this means that some pipes (in hardware) are based on the
new context and some are based on the current_state (since the pipes
are updated on at a time). In this case we must ensure to use the
pipe_ctx that's currently still configured in hardware when turning
off / on OTG's and reconfiguring ODM during the resync.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.
[How]
Avoid disable otg when dig FE/BE FIFO was not switched.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
New scaler needs the input to be full range color space. This will also fix
issues that come up due to not having a predefined limited color space matrix
for certain color spaces
how:
Use bias and scale HW to expand the range of limited color spaces to full
before the scaler
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Based on power measurement result, in most cases when display clock is higher
than Vmin display clock, lowering display clock using dynamic ODM will improve
overall power consumption by 0 to 4 watts even if we can't reach Vmin.
[how]
Allow vmin optimization applied even if dispclk can't reach Vmin.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The mux to switch between refclk and dto_dsc_clk is non double buffered.
However dto dsc clk's phase and modulo divider registers are currently
configured as double buffered update. This causes a problem when we switch to
use dto dsc clk and program phase and modulo in the same sequence. In this
sequence dsc clk is switched to dto but the clock divider programming doesn't
take effect until next frame. When we try to program DSCC registers, SMN bus
will hang because dto dsc clk divider phase is set to 0.
[how]
Configure phase and modulo to take effect immediately. Always switch to dto dsc
clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
