This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First, add an instance parameter to smu_dpm_set_vcn_enable() function,
and calling dpm_set_vcn_enable() with this given instance.
Second, modify vcn_gated to be an array, to track the gating status
for each vcn instance separately.
With these 2 changes, smu_dpm_set_vcn_enable() will check and set the
gating status for the given vcn instance ONLY.
v2: remove duplicated functions.
remove for-loop in dpm_set_vcn_enable(), and temporarily move it to
to smu_dpm_set_power_gate(), in order to keep the exact same logic as
before, until further separation in next patch.
v3: add instance number in error message.
v4: declaring i at the top of the function.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6.
v2: Add firmware version for the reset message.
v3: Add ip version check. Print inst_mask on failure.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Correct the workload setting in order not to mix the setting
with the end user. Update the workload mask accordingly.
v2: changes as below:
1. the end user can not erase the workload from driver except default workload.
2. always shows the real highest priority workoad to the end user.
3. the real workload mask is combined with driver workload mask and end user workload mask.
v3: apply this to the other ASICs as well.
v4: simplify the code
v5: refine the code based on the review comments.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to the existing function dpm_set_vcn_enable()
for future implementation. Re-write all pptable functions accordingly.
v2: Remove duplicated dpm_set_vcn_enable() functions in v1. Instead,
adding instance parameter to existing functions.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips that support it, you can specificy 0 and 0xffff for
min and max and the PMFW will use that to determine the optimal
min and max. This enables optimal performance when the
user manually switches between performance levels using sysfs.
Previously we'd set soft min/max which could limit performance.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
If the reg mmMP1_SMN_C2PMSG_90 is being written to during amdgpu driver
load or driver unload, subsequent amdgpu driver load will fail at
smu_hw_init. The default of mmMP1_SMN_C2PMSG_90 register at a clean
environment is 0x1 and if value differs from expected, amdgpu driver
load will fail.
How to fix:
Ignore the initial value in smu response register before the first smu
message is sent,if smc in SMU_FW_INIT state, just proceed further to
send the message. If register holds an unexpected value after smu message
was sent set, smc_state to SMU_FW_HANG state and no further smu messages
will be sent.
v2:
Set SMU_FW_INIT state at the start of smu hw_init/resume.
Check smc_fw_state before sending smu message if in hang state skip
sending message.
Set SMU_FW_HANG only in case unexpected value is detected
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set/get information about different DPM policies. The
support is only available on SOCs which use swsmu architecture.
A DPM policy type may be defined with different levels. For example, a
policy may be defined to select Pstate preference and then later a
pstate preference may be chosen.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fulfill the SMU13.0.0 support for Wifi RFI mitigation feature.
--
v10->v11:
- downgrade the prompt level on message failure(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
- Move function smu_v13_0_0_set_wbrf_exclusion_ranges to
smu_v13_0.c as a generic code for later use (IIpo Jarvinen)
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With WBRF feature supported, as a driver responding to the frequencies,
amdgpu driver is able to do shadow pstate switching to mitigate possible
interference(between its (G-)DDR memory clocks and local radio module
frequency bands used by Wifi 6/6e/7).
--
v1->v2:
- update the prompt for feature support(Lijo)
v8->v9:
- update parameter document for smu_wbrf_event_handler(Simon)
v9->v10:
v10->v11:
- correct the logics for wbrf range sorting(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage and temperature issue after the driver is unloaded on smu 13.0.0,
smu 13.0.7 and smu 13.0.10
v2 - fix the code format and make sure it is used on the unload case only.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for getting power1_cap_min value on smu13 and smu11.
For other Asics, we still use 0 as the default value.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ppt callback to power up/down UMSCH.
v2: squash in updates (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial swSMU support for smu 14 series ASIC.
v2: squash in build fixes and updates (Li Ma)
fix warnings (Alex)
v3: squash in updates (Alex)
v4: squash in updates (Alex)
v5: squash in avg/current power updates (Alex)
Signed-off-by: Li Ma <li.ma@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The matching values for `pcie_gen_cap` and `pcie_width_cap` when
fetched from powerplay tables are 1 byte, so narrow the arguments
to match to ensure min() and max() comparisons without casts.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the interface to change xgmi per-link power down policy.
v2: split from sysfs interface code and miscellaneous updates
v3: check against XGMI_PLPD_DEFAULT/XGMI_PLPD_OPTIMIZED and
pass PPSMC param
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- There is a DPM issue where if DC is not present,
FCLK will stay at low level.
We need to send a SMU message to configure the DPM
- Reuse smu_v13_0_notify_display_change() for this purpose
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following enum go on the same line
ERROR: open brace '{' following struct go on the same line
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An intentional delay is added on soft ctf triggered. Then there will
be a double check for the GPU temperature before taking further
action. This can avoid unintended shutdown due to temperature
momentary fluctuation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
