Perform fix similar to the one in the commit 85e444a681 ("drm/bridge:
Fix assignment of the of_node of the parent to aux bridge").
The assignment of the of_node to the aux HPD bridge needs to mark the
of_node as reused, otherwise driver core will attempt to bind resources
like pinctrl, which is going to fail as corresponding pins are already
marked as used by the parent device.
Fix that by using the device_set_of_node_from_dev() helper instead of
assigning it directly.
Fixes: e560518a6c ("drm/bridge: implement generic DP HPD bridge")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608-fix-aud-hpd-bridge-v1-1-4641a6f8e381@oss.qualcomm.com
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b13" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
Commit 6579a03e68 ("drm/bridge: analogix_dp: Remove the unnecessary
calls to clk_disable_unprepare() during probing") removed the mismatched
clock_disable calls from analogix_dp_probe.
But that patch was created and sent before
commit e5e9fa9f7a ("drm/bridge: analogix_dp: Add support to get panel
from the DP AUX bus") was merged, so couldn't know about this change.
So in the original patch the last change is
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
- goto err_disable_clk;
+ return ERR_PTR(ret);
}
disable_irq(dp->irq);
return dp;
-
-err_disable_clk:
- clk_disable_unprepare(dp->clock);
- return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(analogix_dp_probe);
the analogix_dp_core.c actually now has the runtime-pm handling between
disable_irq() and return do introducing another goto err_clk_disable there.
So remove that one too and return an error pointer, to not create build
breakage.
Fixes: 6579a03e68 ("drm/bridge: analogix_dp: Remove the unnecessary calls to clk_disable_unprepare() during probing")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527225120.3361663-1-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Use gpiod_set_value_cansleep() instead of gpiod_set_value()
to fix the below call trace in the boot log:
[ 5.690534] Call trace:
[ 5.690536] gpiod_set_value+0x40/0xa4
[ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625]
[ 5.690545] __rpm_callback+0x48/0x1d8
[ 5.690549] rpm_callback+0x6c/0x78
Certain GPIO controllers require access via message-based buses
such as I2C or SPI, which may cause the GPIOs to enter a sleep
state. Therefore, use the gpiod_set_value_cansleep().
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In the anx7625_sink_detect(), the device is checked to see
if it is a panel bridge, and it always sends a "connected"
status to the connector. When adding the DP port on port 1 of the
anx7625, it incorrectly treats it as a panel bridge and sends an
always "connected" status. Instead of checking the status on the
panel bridge, it's better to check the hpd_status for connectors
that supports hot-plugging. This way, it verifies the hpd_status
variable before sending the status to the connector.
In case of eDP, anx7625_bridge_detect() will not get called because
the bridge->ops condition in anx7625_link_bridge() will not be
satisfied. Since anx7625_sink_detect() is called from
anx7625_bridge_detect(), this results in the sink_detect logic not
being executed for eDP.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT
flags to the drm_bridge->ops. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel bridge,
preventing connector_detect() from being called. To resolve
this, instead of just checking if it is a panel bridge, verify
the type of device based on aux whether it is a DisplayPort or
eDP panel. If the device is not of the eDP type, add
DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to
the drm_bridge->ops.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This is the new API for allocating DRM bridges.
These two drivers are tangled together by the ldb_add_bridge_helper(), so
they are converted at once.
They also have a similar design, each embedding an array of channels in
their main struct, and each channel embeds a drm_bridge. This prevents
dynamic, refcount-based deallocation of the bridges.
To make the new, dynamic bridge allocation possible:
* change the array of channels into an array of channel pointers
* allocate each channel using devm_drm_bridge_alloc()
* adapt ldb_add_bridge_helper() to not set the funcs pointer
(now done by devm_drm_bridge_alloc())
* adapt the code wherever using the channels
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-31-8f91a404d86b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fails to build without the KMS helper functions:
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o: in function `tda998x_detect_work':
tda998x_drv.c:(.text+0x4e6): undefined reference to `drm_kms_helper_hotplug_event'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o: in function `tda998x_bind':
tda998x_drv.c:(.text.unlikely+0x33): undefined reference to `drm_simple_encoder_init'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x584): undefined reference to `drm_atomic_helper_connector_reset'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x590): undefined reference to `drm_helper_probe_single_connector_modes'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x5a4): undefined reference to `drm_atomic_helper_connector_duplicate_state'
x86_64-linux-ld: drivers/gpu/drm/bridge/tda998x_drv.o:(.rodata+0x5a8): undefined reference to `drm_atomic_helper_connector_destroy_state'
Select the missing symbol and fix up the broken whitespace.
Fixes: 325ba852d1 ("drm/i2c: move TDA998x driver under drivers/gpu/drm/bridge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250324210824.3094660-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
