create_in_formats creates the list of supported format/modifiers for
synchronous flips, modify the same function so as to take the
format_mod_supported as argument and create list of format/modifier for
async as well.
v5: create_in_formats can return -ve value in failure case, correct the
if condition to check the creation of blob <Chaitanya>
Dont add the modifier for which none of the formats is not supported.
v6: Remove the code for masking the unsupported modifiers as UMD can
leave with it. (Naveen/Chaitanya)
v7: Retain the unsupported modifiers, userspace should have no
impact, return pointer to blob instead of blob_id(Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-2-b93ef83076c5@intel.com
There exists a property IN_FORMATS which exposes the plane supported
modifiers/formats to the user. In some platforms when asynchronous flip
are used all of modifiers/formats mentioned in IN_FORMATS are not
supported. This patch adds a new plane property IN_FORMATS_ASYNC to
expose the async flip supported modifiers/formats so that user can use
this information ahead and do flip with unsupported
formats/modifiers. This will save flip failures.
Add a new function pointer similar to format_mod_supported specifically
for asynchronous flip.
v2: Remove async variable from drm_plane (Ville)
v3: Add new function pointer for async (Ville)
v5: Typo corrected in commit message & some correction in the kernel
documentation. (Chaitanya)
v7: Place IN_FORMATS_ASYNC next to IN_FORMATS (Ville)
v8: replace uint32_t with u32 and uint64_t with u64 (Chaitanya)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-1-b93ef83076c5@intel.com
Add a new immutable plane property by which a plane can advertise
a handful of recommended plane sizes. This would be mostly exposed
by cursor planes as a slightly more capable replacement for
the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare
a one size fits all limit for the whole device.
Currently eg. amdgpu/i915/nouveau just advertize the max cursor
size via the cursor size caps. But always using the max sized
cursor can waste a surprising amount of power, so a better
strategy is desirable.
Most other drivers don't specify any cursor size at all, in
which case the ioctl code just claims that 64x64 is a great
choice. Whether that is actually true is debatable.
A poll of various compositor developers informs us that
blindly probing with setcursor/atomic ioctl to determine
suitable cursor sizes is not acceptable, thus the
introduction of the new property to supplant the cursor
size caps. The compositor will now be free to select a
more optimal cursor size from the short list of options.
Note that the reported sizes (either via the property or the
caps) make no claims about things such as plane scaling. So
these things should only really be consulted for simple
"cursor like" use cases.
Userspace consumer in the form of mutter seems ready:
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165
v2: Try to add some docs
v3: Specify that value 0 is reserved for future use (basic idea from Jonas)
Drop the note about typical hardware (Pekka)
v4: Update the docs to indicate the list is "in order of preference"
Add a a link to the mutter MR
v5: Limit to cursors only for now (Simon)
Cc: Jonas Ådahl <jadahl@redhat.com>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl()
we proceed to unref the fb and then retry the whole thing from the top.
But we forget to reset the fb pointer back to NULL, and so if we then
get another error during the retry, before the fb lookup, we proceed
the unref the same fb again without having gotten another reference.
The end result is that the fb will (eventually) end up being freed
while it's still in use.
Reset fb to NULL once we've unreffed it to avoid doing it again
until we've done another fb lookup.
This turned out to be pretty easy to hit on a DG2 when doing async
flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I
saw that drm_closefb() simply got stuck in a busy loop while walking
the framebuffer list. Fortunately I was able to convince it to oops
instead, and from there it was easier to track down the culprit.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Atomic modesetting code lacked support for specifying mouse cursor
hotspots. The legacy kms DRM_IOCTL_MODE_CURSOR2 had support for setting
the hotspot but the functionality was not implemented in the new atomic
paths.
Due to the lack of hotspots in the atomic paths userspace compositors
completely disable atomic modesetting for drivers that require it (i.e.
all paravirtualized drivers).
This change adds hotspot properties to the atomic codepaths throughtout
the DRM core and will allow enabling atomic modesetting for virtualized
drivers in the userspace.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023074613.41327-3-aesteve@redhat.com
Provide drm_univeral_plane_alloc() to allocate and initialize a
plane. Code for non-atomic drivers uses this pattern. Convert them to
the new function. The modeset helpers contain a quirk for handling their
color formats differently. Set the flag outside plane allocation.
The new function is already deprecated to some extend. Drivers should
rather use drmm_univeral_plane_alloc() or drm_universal_plane_init().
v2:
* kerneldoc fixes (Javier)
* grammar fixes in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-3-tzimmermann@suse.de
While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203102815.38624-1-steven.price@arm.com/
There's two stages of manual upload/invalidate displays:
- just handling dirtyfb and uploading the entire fb all the time
- looking at damage clips
In the latter case we support it through fbdev emulation (with
fb_defio), atomic property, and with the dirtfy clip rects.
Make sure at least the atomic property is set up as the main official
interface for this. Ideally we'd also check that
drm_atomic_helper_dirtyfb() is used and that fbdev defio is set up,
but that's quite a bit harder to do. Ideas very much welcome.
From a cursor audit drivers seem to be getting this right mostly, but
better to make sure. At least no one is bypassing the accessor
function.
v2:
- use drm_warn_once with a meaningful warning string (José)
- don't splat in the atomic check code for everyone (intel-gfx-ci)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-2-daniel.vetter@ffwll.ch
Add a new entry for "type" in the section for standard plane properties.
v3: improve paragraph about mixing legacy IOCTLs with explicit usage,
note that a driver may support cursors without cursor planes (Daniel)
v4: fixing rebase gone wrong
v5:
- Fix typo (Daniel)
- Mention CAP_ATOMIC instead of CAP_UNIVERSAL_PLANES when referring to
atomic test-only commits (Daniel)
- Add newlines at end of sections (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115110626.12233-2-contact@emersion.fr
drm/imx: fixes and drm managed resources
- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
drmm_crtc_alloc_with_planes() for drm_encoder_init(),
drm_simple_encoder_init(), drm_universal_plane_init(), and
drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b68 ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de
Add an alternative to drm_universal_plane_init() that allocates
and initializes a plane and registers drm_plane_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
User-space expects to be able to pick a primary plane for each CRTC
exposed by the driver. Make sure this assumption holds in
drm_mode_config_validate.
Use the legacy drm_crtc.primary field to check this, because it's
simpler and we require drivers to set it anyways. Accumulate a set of
primary planes which are already used for a CRTC in a bitmask. Error out
if a primary plane is re-used.
v2: new patch
v3:
- Use u64 instead of __u64 (Jani)
- Use `unsigned int` instead of `unsigned` (Jani)
v4:
- Use u32 instead of u64 for plane mask (Ville)
- Use drm_plane_mask instead of BIT (Ville)
- Fix typos (Ville)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-4-contact@emersion.fr
Introduce per-plane and per-CRTC scaling filter properties to allow
userspace to select the driver's default scaling filter or
Nearest-neighbor(NN) filter for upscaling operations on CRTC and
plane.
Drivers can set up this property for a plane by calling
drm_plane_create_scaling_filter() and for a CRTC by calling
drm_crtc_create_scaling_filter().
NN filter works by filling in the missing color values in the upscaled
image with that of the coordinate-mapped nearest source pixel value.
NN filter for integer multiple scaling can be particularly useful for
for pixel art games that rely on sharp, blocky images to deliver their
distinctive look.
changes since: v6:
* Move property doc to existing "Standard CRTC Properties" and
"Plane Composition Properties" doc comments (Simon)
changes since v3:
* Refactor code, add new function for common code (Ville)
changes since v2:
* Create per-plane and per-CRTC scaling filter property (Ville)
changes since v1:
* None
changes since RFC:
* Add separate properties for plane and CRTC (Ville)
Link: https://github.com/xbmc/xbmc/pull/18194
Link: https://github.com/xbmc/xbmc/pull/18567
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-2-pankaj.laxminarayan.bharadiya@intel.com
Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The zpos property is used by userspace to sort the order of planes.
While the property is not mandatory for drivers to implement, mixing
planes with and without zpos confuses userspace, and shall not be
allowed. Clarify this in the documentation and warn at runtime if the
drivers mixes planes with and without zpos properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.
In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.
In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com
This patch adds a couple of helpers to remove the boilerplate involved
in grabbing all of the modeset locks.
I've also converted the obvious cases in drm core to use the helpers.
The only remaining instance of drm_modeset_lock_all_ctx() is in
drm_framebuffer. It's complicated by the state clear that occurs on
deadlock. ATM, there's no way to inject code in the deadlock path with
the helpers, so it's unfit for conversion.
Changes in v2:
- Relocate ret argument to the end of the list (Daniel)
- Incorporate Daniel's doc suggestions (Daniel)
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-4-sean@poorly.run
Add a function to check whether there is at least one plane that
supports a specific format and modifier combination. Drivers can
use this to reject unsupported formats/modifiers in .fb_create().
v2: Accept anyformat if the driver doesn't do planes (Eric)
s/planes_have_format/any_plane_has_format/ (Eric)
Check the modifier as well since we already have a function
that does both
v3: Don't do the check in the core since we may not know the
modifier yet, instead export the function and let drivers
call it themselves
Cc: Eric Anholt <eric@anholt.net>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-1-ville.syrjala@linux.intel.com
If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
