Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The bspec only asks the driver to reprogram the DBUF_CTL's
DBUF_TRACKER_STATE_SERVICE field to 0x8 on DG2 and platforms with
display version 12. All other platforms should avoid reprogramming
this register at driver init.
Although we've been accidentally reprogramming DBUF_CTL on platforms
where the spec does not ask us to, that mistake has been harmless so
far because the value being programmed by the driver happened to
match the hardware's default settings.
So, update DBUF_TRACKER_STATE_SERVICE field to 0x8 only for
1. display version 12
2. DG2.
Other platforms unless stated should use their default value.
Bspec: 49213
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108200210.1815229-1-ravi.kumar.vodapalli@intel.com
[mattrope: Tweaked patch subject to accurately reflect content]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Move intel_power_domains_{suspend,resume} to inside
intel_display_power_{suspend_late, resume_early}.
With this also change the VLV suspend failure to call
the intel_display_power_resume_early. In the end, the only
function executed there for VLV is the intel_power_domains_resume.
Besides make the code more consistency give the call that was
immediately before: intel_display_power_suspend_late.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-7-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
Commit dd839aa857 ("drm/i915: Fix incorrect assert about pending power domain async-put work")
fixed the assert about a pending work dropping a display power reference
asynchronously, leading to the
drm_WARN_ON(!queue_delayed_work(&power_domains->async_put_work));
warn next time around a power reference was put asynchronously, due to a
stale instance of the work still being pending. However the fix didn't
consider the case where multiple power reference was acquired and put,
requiring the work to requeue itself. Extend the fix for this case as
well canceling the pending instance of the work before it requeues
itself.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10915
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530105312.1016485-1-imre.deak@intel.com
In the past, the noresume function was used by the GEM code to ensure
wakelocks were held and bump its usage. This is no longer the case
and this function was totally unused until it started to be used again
by display with commit 77e619a82f ("drm/i915/display: convert inner
wakeref get towards get_if_in_use")
However, on the display code, most of the callers are using the
raw wakeref, rather then the wakelock version. What caused a
major regression caught by CI.
Another option to this patch is to go with the original plan and
use the get_if_in_use variant in the display code, what is enough
to fulfil our needs. Then, an extra patch to delete the unused
_noresume variant.
v2: Keep grabbing wakelock but only assert for wakeref. (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 77e619a82f ("drm/i915/display: convert inner wakeref get towards get_if_in_use")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10875
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240418223756.68427-1-rodrigo.vivi@intel.com
This patch brings no functional change. Since at this point of
the code we are already asserting a wakeref was held, it means
that we are with runtime_pm 'in_use' and in practical terms we
are only bumping the pm_runtime usage counter and moving on.
However, xe driver has a lockdep annotation that warned us that
if a sync resume was actually called at this point, we could have
a deadlock because we are inside the power_domains->lock locked
area and the resume would call the irq_reset, which would also
try to get the power_domains->lock.
For this reason, let's convert this call to a safer option and
calm lockdep on.
v2: use _noresume variant instead of get_in_use (Ville, Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add support for specifying a delay different than the current 100 ms
default for powering off a display power domain. This is needed by the
next patch which delays re-enabling DC states during modesets to avoid
the off->on->off toggling overhead of the DC_off power well, but does
this using a < 100 ms delay for a better utilization of DC power saving
states.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616185104.2502003-3-imre.deak@intel.com
PC8+ clobbers a bunch of displays registers which need to
be restored by hand or else we lost a bunch of workarounds.
The important ones for us are at least CHICKEN_PAR2* and
CHICKEN_PIPESL*.
Curiously at least some CHICKEN_PAR1* registers
are preserved by the hardware/firmware. Unfortunately Bspec
doens't really specify what gets clobbered vs. preserved
so further reverse engieering might be warranted to figure
out the specifics.
Note that PCH_LP_PARTITION_LEVEL_DISABLE is also set by
lpt_init_clock_gating() so the rmw in hsw_disable_pc8()
is now redundant. Remove it.
TODO: I suspect most gt stuff doesn't need this and we should
finish moving all of them from init_clock_gating() to
a more appropriate place...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
MTL introduces a new way to instruct the PUnit with
power and bandwidth requirements of DE. Add the functionality
to program the registers and handle waits using interrupts.
The current wait time for timeouts is programmed for 10 msecs to
factor in the worst case scenarios. Changes made to use REG_BIT
for a register that we touched(GEN8_DE_MISC_IER _MMIO).
Wa_14016740474 is added which applies to Xe_LPD+ display
v2: checkpatch warning fixes, simplify program pmdemand part
v3: update to dbufs and pipes values to pmdemand register(stan)
Removed the macro usage in update_pmdemand_values()
v4: move the pmdemand_pre_plane_update before cdclk update
pmdemand_needs_update included cdclk params comparisons
pmdemand_state NULL check (Gustavo)
pmdemand.o in sorted order in the makefile (Jani)
update pmdemand misc irq handler loop (Gustavo)
active phys bitmask and programming correction (Gustavo)
v5: simplify pmdemand_state structure
simplify methods to find active phys and max port clock
Timeout in case of previou pmdemand task pending (Gustavo)
v6: rebasing
updates to max_ddiclk calculations (Gustavo)
updates to active_phys count method (Gustavo)
v7: use two separate loop to iterate throug old and new
crtc states to calculate the active phys (Gustavo)
v8: use uniform function names (Gustavo)
v9: For phys change iterate through connectors (Imre)
Look for change in phys for pmdemand update (Gustavo, Imre)
Some more stlying changes (Imre)
Update pmdemand state during HW readout/sanitize (Imre)
v10: Fix CI checkpatch warnings
v11: use correct pmdemand object pointer during hw readout,
simplify the check for phys need update (Gustavo)
v12: Handle possible non serialize cases (Imre)
Initialise also pmdemand params HW readout (Imre)
Update active phys mask during sanitize calls (Imre)
Check TC/encoder changes to limit connector update (Imre)
v13: Check display version before accessing pmdemand functions
v14: Move is_serialized to intel_global_state.c
simplify update params and other stlying issues (Imre)
Bspec: 66451, 64636, 64602, 64603
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> #v11
Reviewed-by: Imre Deak <imre.deak@intel.com>
[RK: Fixed minor typo in one of the comments. s/qclck_gc/qclk_gv/]
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606201032.347449-1-vinod.govindapillai@intel.com
Rather than embeddeding the display's device info within the main device
info structure, just provide a pointer to the display-specific
structure. This is in preparation for moving the display device info
definitions into the display code itself and for eventually allowing the
pointer to be assigned at runtime on platforms that use GMD_ID for
device identification.
In the future, this will also eventually allow the same display device
info structures to be used outside the current i915 code (e.g., from the
Xe driver).
v2:
- Move introduction of DISPLAY_INFO() to this patch. (Andrzej)
v3:
- Also use DISPLAY_INFO() in intel_display_reg_defs.h. (Andrzej)
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-3-matthew.d.roper@intel.com
