write_event_config callback use an int for state, but it is actually a
boolean. iio_ev_state_store is actually using kstrtobool to check user
input, then gives the converted boolean value to write_event_config.
Fix signature and update all iio drivers to use the new signature.
This patch has been partially written using coccinelle with the
following script:
$ cat iio-bool.cocci
// Options: --all-includes
virtual patch
@c1@
identifier iioinfo;
identifier wecfunc;
@@
static const struct iio_info iioinfo = {
...,
.write_event_config =
(
wecfunc
|
&wecfunc
),
...,
};
@@
identifier c1.wecfunc;
identifier indio_dev, chan, type, dir, state;
@@
int wecfunc(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir,
-int
+bool
state) {
...
}
make coccicheck MODE=patch COCCI=iio-bool.cocci M=drivers/iio
Unfortunately, this script didn't match all files:
* all write_event_config callbacks using iio_device_claim_direct_scoped
were not detected and not patched.
* all files that do not assign and declare the write_event_config
callback in the same file.
iio.h was also manually updated.
The patch was build tested using allmodconfig config.
cc: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241031-iio-fix-write-event-config-signature-v2-7-2bcacbb517a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
Label all the channels using names from the reference manual. Some of
the "control" channels are duplicates of other channels. The reference
manual describes it like:
> The AMS register set includes several measurement registers that are
> written to by the PS SYSMON unit using the single-channel mode
> (sequencer off). These voltage measurements are performed using the
> unipolar sampling circuit with a 0 to 3V range and do not have alarms
> or minimum/maximum registers.
So I think these really are measuring the same voltages but in a
different location. In which case, sharing labels makes sense to me.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240620204842.817237-1-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/ingenic-adc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/xilinx-ams.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/buffer/kfifo_buf.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-iic-v1-1-9f9db6246083@quicinc.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ams_enable_channel_sequence constructs a "scan_mask" for all the PS and
PL channels. This works out fine, since scan_index for these channels is
less than 64. However, it also includes the ams_ctrl_channels, where
scan_index is greater than 64, triggering undefined behavior. Since we
don't need these channels anyway, just exclude them.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20240311162800.11074-1-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some of the AMS channels need to be read by switching into single-channel
mode from the normal polling sequence. There was a logic issue in this
switching code that could cause the first read of these channels to read
back as zero.
It appears that the sequencer should be set back to default mode before
changing the channel selection, and the channel should be set before
switching the sequencer back into single-channel mode.
Also, write 1 to the EOC bit in the status register to clear it before
waiting for it to become set, so that we actually wait for a new
conversion to complete, and don't proceed based on a previous conversion
completing.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-5-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AMS includes an ADC as well as on-chip sensors that can be used to
sample external voltages and monitor on-die operating conditions, such
as temperature and supply voltage levels. The AMS has two SYSMON blocks.
PL-SYSMON block is capable of monitoring off chip voltage and
temperature.
PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
from an external master. Out of these interfaces currently only DRP is
supported. Other block PS-SYSMON is memory mapped to PS.
The AMS can use internal channels to monitor voltage and temperature as
well as one primary and up to 16 auxiliary channels for measuring
external voltages.
The voltage and temperature monitoring channels also have event capability
which allows to generate an interrupt when their value falls below or
raises above a set threshold.
Co-developed-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Link: https://lore.kernel.org/r/20211203212358.31444-4-anand.ashok.dumbre@xilinx.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
