Pull power management fixes from Rafael Wysocki:
"These address three issues introduced during the current development
cycle and related to system suspend and hibernation, one triggering
when asynchronous suspend of devices fails, one possibly affecting
memory management in the core suspend code error path, and one due to
duplicate filesystems freezing during system suspend:
- Fix a deadlock that may occur on asynchronous device suspend
failures due to missing completion updates in error paths (Rafael
Wysocki)
- Drop a misplaced pm_restore_gfp_mask() call, which may cause swap
to be accessed too early if system suspend fails, from
suspend_devices_and_enter() (Rafael Wysocki)
- Remove duplicate filesystems_freeze/thaw() calls, which sometimes
cause systems to be unable to resume, from enter_state() (Zihuan
Zhang)"
* tag 'pm-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Update power.completion for all devices on errors
PM: suspend: clean up redundant filesystems_freeze/thaw() handling
PM: suspend: Drop a misplaced pm_restore_gfp_mask() call
The recently introduced support for freezing filesystems during system
suspend included calls to filesystems_freeze() in both suspend_prepare()
and enter_state(), as well as calls to filesystems_thaw() in both
suspend_finish() and the Unlock path in enter_state(). These are
redundant.
Moreover, calling filesystems_freeze() twice, from both suspend_prepare()
and enter_state(), leads to a black screen and makes the system unable
to resume in some cases.
Address this as follows:
- filesystems_freeze() is already called in suspend_prepare(), which
is the proper and consistent place to handle pre-suspend operations.
The second call in enter_state() is unnecessary and so remove it.
- filesystems_thaw() is invoked in suspend_finish(), which covers
successful suspend/resume paths. In the failure case, add a call
to filesystems_thaw() only when needed, avoiding the duplicate call
in the general Unlock path.
This change simplifies the suspend code and avoids repeated freeze/thaw
calls, while preserving correct ordering and behavior.
Fixes: eacfbf7419 ("power: freeze filesystems during suspend/resume")
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/20250712030824.81474-1-zhangzihuan@kylinos.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pm_restore_gfp_mask() call added by commit 12ffc3b151 ("PM:
Restrict swap use to later in the suspend sequence") to
suspend_devices_and_enter() is done too early because it takes
place before calling dpm_resume() in dpm_resume_end() and some
swap-backing devices may not be ready at that point. Moreover,
dpm_resume_end() called subsequently in the same code path invokes
pm_restore_gfp_mask() again and calling it twice in a row is
pointless.
Drop the misplaced pm_restore_gfp_mask() call from
suspend_devices_and_enter() to address this issue.
Fixes: 12ffc3b151 ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2810409.mvXUDI8C0e@rjwysocki.net
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull perf fix from Borislav Petkov:
- Prevent perf_sigtrap() from observing an exiting task and warning
about it
* tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix WARN in perf_sigtrap()
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull dma-mapping fix from Marek Szyprowski:
- small fix relevant to arm64 server and custom CMA configuration (Feng
Tang)
* tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: hornor the cma address limit setup by user
The per-CPU data section is handled differently than the other sections.
The memory allocations requires a special __percpu pointer and then the
section is copied into the view of each CPU. Therefore the SHF_ALLOC
flag is removed to ensure move_module() skips it.
Later, relocations are applied and apply_relocations() skips sections
without SHF_ALLOC because they have not been copied. This also skips the
per-CPU data section.
The missing relocations result in a NULL pointer on x86-64 and very
small values on x86-32. This results in a crash because it is not
skipped like NULL pointer would and can't be dereferenced.
Such an assignment happens during static per-CPU lock initialisation
with lockdep enabled.
Allow relocation processing for the per-CPU section even if SHF_ALLOC is
missing.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202506041623.e45e4f7d-lkp@intel.com
Fixes: 1a6100caae425 ("Don't relocate non-allocated regions in modules.") #v2.6.1-rc3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250610163328.URcsSUC1@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250610163328.URcsSUC1@linutronix.de>
The function move_module() uses the variable t to track how many memory
types it has allocated and consequently how many should be freed if an
error occurs.
The variable is initially set to 0 and is updated when a call to
module_memory_alloc() fails. However, move_module() can fail for other
reasons as well, in which case t remains set to 0 and no memory is freed.
Fix the problem by initializing t to MOD_MEM_NUM_TYPES. Additionally, make
the deallocation loop more robust by not relying on the mod_mem_type_t enum
having a signed integer as its underlying type.
Fixes: c7ee8aebf6 ("module: add stop-grap sanity check on module memcpy()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-2-petr.pavlu@suse.com>
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
Pull perf fixes from Borislav Petkov:
- Revert uprobes to using CAP_SYS_ADMIN again as currently they can
destructively modify kernel code from an unprivileged process
- Move a warning to where it belongs
* tag 'perf_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
perf/core: Fix the WARN_ON_ONCE is out of lock protected region
Merge fixes related to system sleep for 6.16-rc5:
- Fix typo in the ABI documentation (Sumanth Gavini).
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello).
* pm-sleep:
PM: sleep: docs: Replace "diasble" with "disable"
PM: Restrict swap use to later in the suspend sequence
In our testing with 6.12 based kernel on a big.LITTLE system, we were
seeing instances of RT tasks being blocked from running on the LITTLE
cpus for multiple seconds of time, apparently by the dl_server. This
far exceeds the default configured 50ms per second runtime.
This is due to the fair dl_server runtime calculation being scaled
for frequency & capacity of the cpu.
Consider the following case under a Big.LITTLE architecture:
Assume the runtime is: 50,000,000 ns, and Frequency/capacity
scale-invariance defined as below:
Frequency scale-invariance: 100
Capacity scale-invariance: 50
First by Frequency scale-invariance,
the runtime is scaled to 50,000,000 * 100 >> 10 = 4,882,812
Then by capacity scale-invariance,
it is further scaled to 4,882,812 * 50 >> 10 = 238,418.
So it will scaled to 238,418 ns.
This smaller "accounted runtime" value is what ends up being
subtracted against the fair-server's runtime for the current period.
Thus after 50ms of real time, we've only accounted ~238us against the
fair servers runtime. This 209:1 ratio in this example means that on
the smaller cpu the fair server is allowed to continue running,
blocking RT tasks, for over 10 seconds before it exhausts its supposed
50ms of runtime. And on other hardware configurations it can be even
worse.
For the fair deadline_server, to prevent realtime tasks from being
unexpectedly delayed, we really do want to use fixed time, and not
scaled time for smaller capacity/frequency cpus. So remove the scaling
from the fair server's accounting to fix this.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: John Stultz <jstultz@google.com>
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250702021440.2594736-1-kuyo.chang@mediatek.com
Base implementation for PTP with a temporary CLOCK_AUX* workaround to
allow integration of depending changes into the networking tree.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PTP implements an inline switch case for taking timestamps from various
POSIX clock IDs, which already consumes quite some text space. Expanding it
for auxiliary clocks really becomes too big for inlining.
Provide a out of line version.
The function invalidates the timestamp in case the clock is invalid. The
invalidation allows to implement a validation check without the need to
propagate a return value through deep existing call chains.
Due to merge logistics this temporarily defines CLOCK_AUX[_LAST] if
undefined, so that the plain branch, which does not contain any of the core
timekeeper changes, can be pulled into the networking tree as prerequisite
for the PTP side changes. These temporary defines are removed after that
branch is merged into the tip::timers/ptp branch. That way the result in
-next or upstream in the next merge window has zero dependencies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250701132628.357686408@linutronix.de
Jann reports that uprobes can be used destructively when used in the
middle of an instruction. The kernel only verifies there is a valid
instruction at the requested offset, but due to variable instruction
length cannot determine if this is an instruction as seen by the
intended execution stream.
Additionally, Mark Rutland notes that on architectures that mix data
in the text segment (like arm64), a similar things can be done if the
data word is 'mistaken' for an instruction.
As such, require CAP_SYS_ADMIN for uprobes.
Fixes: c9e0924e5c ("perf/core: open access to probes for CAP_PERFMON privileged process")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/CAG48ez1n4520sq0XrWYDHKiKxE_+WCfAK+qt9qkY4ZiBGmL-5g@mail.gmail.com
On Mon, Jun 02, 2025 at 03:22:13PM +0800, Kuyo Chang wrote:
> So, the potential race scenario is:
>
> CPU0 CPU1
> // doing migrate_swap(cpu0/cpu1)
> stop_two_cpus()
> ...
> // doing _cpu_down()
> sched_cpu_deactivate()
> set_cpu_active(cpu, false);
> balance_push_set(cpu, true);
> cpu_stop_queue_two_works
> __cpu_stop_queue_work(stopper1,...);
> __cpu_stop_queue_work(stopper2,..);
> stop_cpus_in_progress -> true
> preempt_enable();
> ...
> 1st balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 1st add push_work
> wake_up_q(&wakeq); -> "wakeq is empty.
> This implies that the stopper is at wakeq@migrate_swap."
> preempt_disable
> wake_up_q(&wakeq);
> wake_up_process // wakeup migrate/0
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond ->meet below case
> if (cpu == smp_processor_id())
> return false;
> ttwu_do_activate
> //migrate/0 wakeup done
> wake_up_process // wakeup migrate/1
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond
> ttwu_queue_wakelist
> __ttwu_queue_wakelist
> __smp_call_single_queue
> preempt_enable();
>
> 2nd balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 2nd add push_work, so the double list add is detected
> ...
> ...
> cpu1 get ipi, do sched_ttwu_pending, wakeup migrate/1
>
So this balance_push() is part of schedule(), and schedule() is supposed
to switch to stopper task, but because of this race condition, stopper
task is stuck in WAKING state and not actually visible to be picked.
Therefore CPU1 can do another schedule() and end up doing another
balance_push() even though the last one hasn't been done yet.
This is a confluence of fail, where both wake_q and ttwu_wakelist can
cause crucial wakeups to be delayed, resulting in the malfunction of
balance_push.
Since there is only a single stopper thread to be woken, the wake_q
doesn't really add anything here, and can be removed in favour of
direct wakeups of the stopper thread.
Then add a clause to ttwu_queue_cond() to ensure the stopper threads
are never queued / delayed.
Of all 3 moving parts, the last addition was the balance_push()
machinery, so pick that as the point the bug was introduced.
Fixes: 2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Link: https://lkml.kernel.org/r/20250605100009.GO39944@noisy.programming.kicks-ass.net
Pull perf fix from Borislav Petkov:
- Make sure an AUX perf event is really disabled when it overruns
* tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix pending disable flow when the AUX ring buffer overruns
Pull tracing fix from Steven Rostedt:
- Fix possible UAF on error path in filter_free_subsystem_filters()
When freeing a subsystem filter, the filter for the subsystem is
passed in to be freed and all the events within the subsystem will
have their filter freed too. In order to free without waiting for RCU
synchronization, list items are allocated to hold what is going to be
freed to free it via a call_rcu(). If the allocation of these items
fails, it will call the synchronization directly and free after that
(causing a bit of delay for the user).
The subsystem filter is first added to this list and then the filters
for all the events under the subsystem. The bug is if one of the
allocations of the list items for the event filters fail to allocate,
it jumps to the "free_now" label which will free the subsystem
filter, then all the items on the allocated list, and then the event
filters that were not added to the list yet. But because the
subsystem filter was added first, it gets freed twice.
The solution is to add the subsystem filter after the events, and
then if any of the allocations fail it will not try to free any of
them twice
* tag 'trace-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix filter logic error
Pull misc fixes from Andrew Morton:
"16 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 5 are for MM"
* tag 'mm-hotfixes-stable-2025-06-27-16-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add Lorenzo as THP co-maintainer
mailmap: update Duje Mihanović's email address
selftests/mm: fix validate_addr() helper
crashdump: add CONFIG_KEYS dependency
mailmap: correct name for a historical account of Zijun Hu
mailmap: add entries for Zijun Hu
fuse: fix runtime warning on truncate_folio_batch_exceptionals()
scripts/gdb: fix dentry_name() lookup
mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write
mm/alloc_tag: fix the kmemleak false positive issue in the allocation of the percpu variable tag->counters
lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly()
mm/hugetlb: remove unnecessary holding of hugetlb_lock
MAINTAINERS: add missing files to mm page alloc section
MAINTAINERS: add tree entry to mm init block
mm: add OOM killer maintainer structure
fs/proc/task_mmu: fix PAGE_IS_PFNZERO detection for the huge zero folio
If an AUX event overruns, the event core layer intends to disable the
event by setting the 'pending_disable' flag. Unfortunately, the event
is not actually disabled afterwards.
In commit:
ca6c21327c ("perf: Fix missing SIGTRAPs")
the 'pending_disable' flag was changed to a boolean. However, the
AUX event code was not updated accordingly. The flag ends up holding a
CPU number. If this number is zero, the flag is taken as false and the
IRQ work is never triggered.
Later, with commit:
2b84def990 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
a new IRQ work 'pending_disable_irq' was introduced to handle event
disabling. The AUX event path was not updated to kick off the work queue.
To fix this bug, when an AUX ring buffer overrun is detected, call
perf_event_disable_inatomic() to initiate the pending disable flow.
Also update the outdated comment for setting the flag, to reflect the
boolean values (0 or 1).
Fixes: 2b84def990 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
Fixes: ca6c21327c ("perf: Fix missing SIGTRAPs")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250625170737.2918295-1-leo.yan@arm.com
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
The dm_crypt code fails to build without CONFIG_KEYS:
kernel/crash_dump_dm_crypt.c: In function 'restore_dm_crypt_keys_to_thread_keyring':
kernel/crash_dump_dm_crypt.c:105:9: error: unknown type name 'key_ref_t'; did you mean 'key_ref_put'?
There is a mix of 'select KEYS' and 'depends on KEYS' in Kconfig,
so there is no single obvious solution here, but generally using 'depends on'
makes more sense and is less likely to cause dependency loops.
Link: https://lkml.kernel.org/r/20250620112140.3396316-1-arnd@kernel.org
Fixes: 62f17d9df6 ("crash_dump: retrieve dm crypt keys in kdump kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.
Until commit 37cce22dbd ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.
Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-2-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c5 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
Pull irq fixes from Borislav Petkov:
- Fix missing prototypes warnings
- Properly initialize work context when allocating it
- Remove a method tracking when managed interrupts are suspended during
hotplug, in favor of the code using a IRQ disable depth tracking now,
and have interrupts get properly enabled again on restore
- Make sure multiple CPUs getting hotplugged don't cause wrong tracking
of the managed IRQ disable depth
* tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ath79-misc: Fix missing prototypes warnings
genirq/irq_sim: Initialize work context pointers properly
genirq/cpuhotplug: Restore affinity even for suspended IRQ
genirq/cpuhotplug: Rebalance managed interrupts across multi-CPU hotplug
Pull perf fixes from Borislav Petkov:
- Avoid a crash on a heterogeneous machine where not all cores support
the same hw events features
- Avoid a deadlock when throttling events
- Document the perf event states more
- Make sure a number of perf paths switching off or rescheduling events
call perf_cgroup_event_disable()
- Make sure perf does task sampling before its userspace mapping is
torn down, and not after
* tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix crash in icl_update_topdown_event()
perf: Fix the throttle error of some clock events
perf: Add comment to enum perf_event_state
perf/core: Fix WARN in perf_cgroup_switch()
perf: Fix dangling cgroup pointer in cpuctx
perf: Fix cgroup state vs ERROR
perf: Fix sample vs do_exit()
Pull locking fixes from Borislav Petkov:
- Make sure the switch to the global hash is requested always under a
lock so that two threads requesting that simultaneously cannot get to
inconsistent state
- Reject negative NUMA nodes earlier in the futex NUMA interface
handling code
- Selftests fixes
* tag 'locking_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Verify under the lock if hash can be replaced
futex: Handle invalid node numbers supplied by user
selftests/futex: Set the home_node in futex_numa_mpol
selftests/futex: getopt() requires int as return value.
Currently the call_rcu() API does not check whether a callback
pointer is NULL. If NULL is passed, rcu_core() will try to invoke
it, resulting in NULL pointer dereference and a kernel crash.
To prevent this and improve debuggability, this patch adds a check
for NULL and emits a kernel stack trace to help identify a faulty
caller.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Currently, when restoring higher order folios, kho_restore_folio() only
calls prep_compound_page() on all the pages. That is not enough to
properly initialize the folios. The managed page count does not get
updated, the reserved flag does not get dropped, and page count does not
get initialized properly.
Restoring a higher order folio with it results in the following BUG with
CONFIG_DEBUG_VM when attempting to free the folio:
BUG: Bad page state in process test pfn:104e2b
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x104e2b
flags: 0x2fffff80000000(node=0|zone=2|lastcpupid=0x1fffff)
raw: 002fffff80000000 0000000000000000 00000000ffffffff 0000000000000000
raw: ffffffffffffffff 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: nonzero _refcount
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x4b/0x70
bad_page.cold+0x97/0xb2
__free_frozen_pages+0x616/0x850
[...]
Combine the path for 0-order and higher order folios, initialize the tail
pages with a count of zero, and call adjust_managed_page_count() to
account for all the pages instead of just missing them.
In addition, since all the KHO-preserved pages get marked with
MEMBLOCK_RSRV_NOINIT by deserialize_bitmap(), the reserved flag is not
actually set (as can also be seen from the flags of the dumped page in the
logs above). So drop the ClearPageReserved() calls.
[ptyadav@amazon.de: declare i in the loop instead of at the top]
Link: https://lkml.kernel.org/r/20250613125916.39272-1-pratyush@kernel.org
Link: https://lkml.kernel.org/r/20250605171143.76963-1-pratyush@kernel.org
Fixes: fc33e4b44b ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the
map is full, due to percpu reservations and force shrink before
neighbor stealing. Once a CPU is unable to borrow from the global map,
it will once steal one elem from a neighbor and after that each time
flush this one element to the global list and immediately recycle it.
Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map
with 79 CPUs. CPU 79 will observe this behavior even while its
neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%).
CPUs need not be active concurrently. The issue can appear with
affinity migration, e.g., irqbalance. Each CPU can reserve and then
hold onto its 128 elements indefinitely.
Avoid global list exhaustion by limiting aggregate percpu caches to
half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count.
This change has no effect on sufficiently large tables.
Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable
lru->free_target. The extra field fits in a hole in struct bpf_lru.
The cacheline is already warm where read in the hot path. The field is
only accessed with the lru lock held.
Tested-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250618215803.3587312-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull cgroup fix from Tejun Heo:
- In cgroup1 freezer, a task migrating into a frozen cgroup might not
get frozen immediately due to the wrong operation order. Fix it.
* tag 'cgroup-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup,freezer: fix incomplete freezing when attaching tasks
Pull workqueue fix from Tejun Heo:
- Fix missed early init of wq_isolated_cpumask
* tag 'wq-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Initialize wq_isolated_cpumask in workqueue_init_early()
Pull sched_ext fixes from Tejun Heo:
- Fix a couple bugs in cgroup cpu.weight support
- Add the new sched-ext@lists.linux.dev to MAINTAINERS
* tag 'sched_ext-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext, sched/core: Don't call scx_group_set_weight() prematurely from sched_create_group()
sched_ext: Make scx_group_set_weight() always update tg->scx.weight
sched_ext: Update mailing list entry in MAINTAINERS
An issue was found:
# cd /sys/fs/cgroup/freezer/
# mkdir test
# echo FROZEN > test/freezer.state
# cat test/freezer.state
FROZEN
# sleep 1000 &
[1] 863
# echo 863 > test/cgroup.procs
# cat test/freezer.state
FREEZING
When tasks are migrated to a frozen cgroup, the freezer fails to
immediately freeze the tasks, causing the cgroup to remain in the
"FREEZING".
The freeze_task() function is called before clearing the CGROUP_FROZEN
flag. This causes the freezing() check to incorrectly return false,
preventing __freeze_task() from being invoked for the migrated task.
To fix this issue, clear the CGROUP_FROZEN state before calling
freeze_task().
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Zhong Jiawei <zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
