Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
Pull tracing updates from Steven Rostedt:
"Trivial updates for 6.11:
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about. Changing
it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved
The prev_comm was being saved along with the other next fields, and
the next_comm was being saved along with the other prev fields.
This is just a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL
The allocation can happen in irq_work context, but luckily, the
size was by default so large, it was never triggered. But in case
it ever is, use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors"
* tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/pid_list: Change gfp flags in pid_list_fill_irq()
tracing/sched: sched_switch: place prev_comm and next_comm in right order
rtla/osnoise: set the default threshold to 1us
tracing: Fix trace_pid_list_free() kernel-doc
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
For systems on which the performance counter can expire early due to turbo
modes the watchdog handler has a safety net in place which validates that
since the last watchdog event there has at least 4/5th of the watchdog
period elapsed.
This works reliably only after the first watchdog event because the per
CPU variable which holds the timestamp of the last event is never
initialized.
So a first spurious event will validate against a timestamp of 0 which
results in a delta which is likely to be way over the 4/5 threshold of the
period. As this might happen before the first watchdog hrtimer event
increments the watchdog counter, this can lead to false positives.
Fix this by initializing the timestamp before enabling the hardware event.
Reset the rearm counter as well, as that might be non zero after the
watchdog was disabled and reenabled.
Link: https://lkml.kernel.org/r/87frsfu15a.ffs@tglx
Fixes: 7edaeb6841 ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "revert unconditional slab and page allocator fault injection
calls".
These two patches largely revert commits that added function call overhead
into slab and page allocation hotpaths and that cannot be currently
disabled even though related CONFIG_ options do exist.
A much more involved solution that can keep the callsites always existing
but hidden behind a static key if unused, is possible [1] and can be
pursued by anyone who believes it's necessary. Meanwhile the fact the
should_failslab() error injection is already not functional on kernels
built with current gcc without anyone noticing [2], and lukewarm response
to [1] suggests the need is not there. I believe it will be more fair to
have the state after this series as a baseline for possible further
optimisation, instead of the unconditional overhead.
For example a possible compromise for anyone who's fine with an empty
function call overhead but not the full CONFIG_FAILSLAB /
CONFIG_FAIL_PAGE_ALLOC overhead is to reuse patch 1 from [1] but insert a
static key check only inside should_failslab() and
should_fail_alloc_page() before performing the more expensive checks.
[1] https://lore.kernel.org/all/20240620-fault-injection-statickeys-v2-0-e23947d3d84b@suse.cz/#t
[2] https://github.com/bpftrace/bpftrace/issues/3258
This patch (of 2):
This mostly reverts commit 4f6923fbb3 ("mm: make should_failslab always
available for fault injection"). The commit made should_failslab() a
noinline function that's always called from the slab allocation hotpath,
even if it's empty because CONFIG_SHOULD_FAILSLAB is not enabled, and
there is no option to disable that call. This is visible in profiles and
the function call overhead can be noticeable especially with cpu
mitigations.
Meanwhile the bpftrace program example in the commit silently does not
work without CONFIG_SHOULD_FAILSLAB anyway with a recent gcc, because the
empty function gets a .constprop clone that is actually being called
(uselessly) from the slab hotpath, while the error injection is hooked to
the original function that's not being called at all [1].
Thus put the whole should_failslab() function back behind
CONFIG_SHOULD_FAILSLAB. It's not a complete revert of 4f6923fbb3 - the
int return type that returns -ENOMEM on failure is preserved, as well
ALLOW_ERROR_INJECTION annotation. The BTF_ID() record that was meanwhile
added is also guarded by CONFIG_SHOULD_FAILSLAB.
[1] https://github.com/bpftrace/bpftrace/issues/3258
Link: https://lkml.kernel.org/r/20240711-b4-fault-injection-reverts-v1-0-9e2651945d68@suse.cz
Link: https://lkml.kernel.org/r/20240711-b4-fault-injection-reverts-v1-1-9e2651945d68@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Pull performance events updates from Ingo Molnar:
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
* tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf/x86/intel: Add a distinct name for Granite Rapids
perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake
perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated
perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR
perf: Split __perf_pending_irq() out of perf_pending_irq()
perf: Don't disable preemption in perf_pending_task().
perf: Move swevent_htable::recursion into task_struct.
perf: Shrink the size of the recursion counter.
perf: Enqueue SIGTRAP always via task_work.
task_work: Add TWA_NMI_CURRENT as an additional notify mode.
perf: Move irq_work_queue() where the event is prepared.
perf: Fix event leak upon exec and file release
perf: Fix event leak upon exit
task_work: Introduce task_work_cancel() again
task_work: s/task_work_cancel()/task_work_cancel_func()/
perf/x86/amd/uncore: Fix DF and UMC domain identification
perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable
perf/x86/intel: Support Perfmon MSRs aliasing
perf/x86/intel: Support PERFEVTSEL extension
perf/x86: Add config_mask to represent EVENTSEL bitmask
...
Pull scheduler updates from Ingo Molnar:
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
* tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Update MAINTAINERS and CREDITS
sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks
sched/psi: Optimise psi_group_change a bit
sched/core: Drop spinlocks on contention iff kernel is preemptible
sched/core: Move preempt_model_*() helpers from sched.h to preempt.h
sched/balance: Skip unnecessary updates to idle load balancer's flags
idle: Remove stale RCU comment
sched/headers: Move struct pre-declarations to the beginning of the header
sched/core: Clean up kernel/sched/sched.h a bit
sched/core: Simplify prefetch_curr_exec_start()
sched: Fix spelling in comments
sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c
Pull locking updates from Ingo Molnar:
- Jump label fixes, including a perf events fix that originally
manifested as jump label failures, but was a serialization bug at the
usage site
- Mark down_write*() helpers as __always_inline, to improve WCHAN
debuggability
- Misc cleanups and fixes
* tag 'locking-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_write_common() and inlined callers
jump_label: Simplify and clarify static_key_fast_inc_cpus_locked()
jump_label: Clarify condition in static_key_fast_inc_not_disabled()
jump_label: Fix concurrency issues in static_key_slow_dec()
perf/x86: Serialize set_attr_rdpmc()
cleanup: Standardize the header guard define's name
Pull sysctl updates from Joel Granados:
- Remove "->procname == NULL" check when iterating through sysctl table
arrays
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. With all
ctl_table sentinels gone, the additional check for ->procname == NULL
that worked in tandem with the ARRAY_SIZE to calculate the size of
the ctl_table arrays is no longer needed and has been removed. The
sysctl register functions now returns an error if a sentinel is used.
- Preparation patches for sysctl constification
Constifying ctl_table structs prevents the modification of
proc_handler function pointers as they would reside in .rodata. The
ctl_table arguments in sysctl utility functions are const qualified
in preparation for a future treewide proc_handler argument
constification commit.
- Misc fixes
Increase robustness of set_ownership by providing sane default
ownership values in case the callee doesn't set them. Bound check
proc_dou8vec_minmax to avoid loading buggy modules and give sysctl
testing module a name to avoid compiler complaints.
* tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Warn on an empty procname element
sysctl: Remove ctl_table sentinel code comments
sysctl: Remove "child" sysctl code comments
sysctl: Remove superfluous empty allocations from sysctl internals
sysctl: Replace nr_entries with ctl_table_size in new_links
sysctl: Remove check for sentinel element in ctl_table arrays
mm profiling: Remove superfluous sentinel element from ctl_table
locking: Remove superfluous sentinel element from kern_lockdep_table
sysctl: Add module description to sysctl-testing
sysctl: constify ctl_table arguments of utility function
utsname: constify ctl_table arguments of utility function
sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array
sysctl: always initialize i_uid/i_gid
Pull seccomp updates from Kees Cook:
- interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin)
- Update selftests to check for expected NOTIF_RECV exits (Andrei
Vagin)
* tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: check that a zombie leader doesn't affect others
selftests/seccomp: add test for NOTIF_RECV and unused filters
seccomp: release task filters when the task exits
seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited
Pull xen updates from Juergen Gross:
- some trivial cleanups
- a fix for the Xen timer
- add boot time selectable debug capability to the Xen multicall
handling
- two fixes for the recently added Xen irqfd handling
* tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove deprecated xen_nopvspin boot parameter
x86/xen: eliminate some private header files
x86/xen: make some functions static
xen: make multicall debug boot time selectable
xen/arm: Convert comma to semicolon
xen: privcmd: Fix possible access to a freed kirqfd instance
xen: privcmd: Switch from mutex to spinlock for irqfds
xen: add missing MODULE_DESCRIPTION() macros
x86/xen: Convert comma to semicolon
x86/xen/time: Reduce Xen timer tick
xen/manage: Constify struct shutdown_handler
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
Pull workqueue fix from Tejun Heo:
"cpus_read_lock() was dropped from workqueue creation path but there
were still remaining lockdep_assert_cpus_held() triggering spurious
lockdep failures. Remove them"
* tag 'wq-for-6.11-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Remove unneeded lockdep_assert_cpus_held()
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
Pull workqueue updates from Tejun Heo:
- Lai fixed a bug where CPU hotplug and workqueue attribute changes
race leaving some workqueues not fully updated. This involved
refactoring and changing how online CPUs are tracked. The resulting
code is cleaner.
- Workqueue watchdog touch operation was causing too much cacheline
contention on very large machines. Nicholas improved scalabililty by
avoiding unnecessary global updates.
- Code cleanups and minor rescuer behavior improvement.
- The last commit 58629d4871 ("workqueue: Always queue work items to
the newest PWQ for order workqueues") is a cherry-picked straggler
commit from for-6.10-fixes, a fix for a bug which may not actually
trigger.
* tag 'wq-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (24 commits)
workqueue: Always queue work items to the newest PWQ for order workqueues
workqueue: Rename wq_update_pod() to unbound_wq_update_pwq()
workqueue: Remove the arguments @hotplug_cpu and @online from wq_update_pod()
workqueue: Remove the argument @cpu_going_down from wq_calc_pod_cpumask()
workqueue: Remove the unneeded cpumask empty check in wq_calc_pod_cpumask()
workqueue: Remove cpus_read_lock() from apply_wqattrs_lock()
workqueue: Simplify wq_calc_pod_cpumask() with wq_online_cpumask
workqueue: Add wq_online_cpumask
workqueue: Init rescuer's affinities as the wq's effective cpumask
workqueue: Put PWQ allocation and WQ enlistment in the same lock C.S.
workqueue: Move kthread_flush_worker() out of alloc_and_link_pwqs()
workqueue: Make rescuer initialization as the last step of the creation of a new wq
workqueue: Register sysfs after the whole creation of the new wq
workqueue: Simplify goto statement
workqueue: Update cpumasks after only applying it successfully
workqueue: Improve scalability of workqueue watchdog touch
workqueue: wq_watchdog_touch is always called with valid CPU
workqueue: Remove useless pool->dying_workers
workqueue: Detach workers directly in idle_cull_fn()
workqueue: Don't bind the rescuer in the last working cpu
...
Pull cgroup updates from Tejun Heo:
- Added Michal Koutný as a maintainer
- Counters in pids.events were behaving inconsistently. pids.events
made properly hierarchical and pids.events.local added
- misc.peak and misc.events.local added
- cpuset remote partition creation and cpuset.cpus.exclusive handling
improved
- Code cleanups, non-critical fixes, doc updates
- for-6.10-fixes is merged in to receive two non-critical fixes that
didn't trigger pull
* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
cgroup: Add Michal Koutný as a maintainer
cgroup/misc: Introduce misc.events.local
cgroup/rstat: add force idle show helper
cgroup: Protect css->cgroup write under css_set_lock
cgroup/misc: Introduce misc.peak
cgroup_misc: add kernel-doc comments for enum misc_res_type
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
selftest/cgroup: Update test_cpuset_prs.sh to match changes
cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
cgroup/cpuset: Fix remote root partition creation problem
cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
selftests: cgroup: Add basic tests for pids controller
selftests: cgroup: Lexicographic order in Makefile
cgroup/pids: Add pids.events.local
cgroup/pids: Make event counters hierarchical
...
Pull KCSAN updates from Paul McKenney:
- improve the documentation for the new __data_racy type qualifier
to the data_race() macro's kernel-doc header and to the LKMM's
access-marking documentation
- add missing MODULE_DESCRIPTION
* tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Add missing MODULE_DESCRIPTION() macro
kcsan: Add example to data_race() kerneldoc header
Pull torture-test updates from Paul McKenney:
"This adds MODULE_DESCRIPTION() to torture.c, locktorture.c, and
scftorture.c, and also adds 'static' to a global variable that is used
only in scftorture.c"
* tag 'torture.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
scftorture: Make torture_type static
scftorture: Add MODULE_DESCRIPTION()
locktorture: Add MODULE_DESCRIPTION()
torture: Add MODULE_DESCRIPTION()
Pull RCU updates from Paul McKenney:
- Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
and clarify rcu_assign_pointer() and rcu_dereference() ordering
properties
- Add lockdep assertions for RCU readers, limit inline wakeups for
callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue
- Remove a number of redundant memory barriers
- Remove unnecessary bypass-list lock-contention mitigation, use
parking API instead of open-coded ad-hoc equivalent, and upgrade
obsolete comments
- Revert avoidance of a deadlock that can no longer occur and properly
synchronize Tasks Trace RCU checking of runqueues
- Add tests for handling of double-call_rcu() bug, add missing
MODULE_DESCRIPTION, and add a script that histograms the number of
calls to RCU updaters
- Fill out SRCU polled-grace-period API
* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
rcu: Eliminate lockless accesses to rcu_sync->gp_count
MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
rcu/exp: Remove redundant full memory barrier at the end of GP
rcu: Remove full memory barrier on RCU stall printout
rcu: Remove full memory barrier on boot time eqs sanity check
rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove full ordering on second EQS snapshot
srcu: Fill out polled grace-period APIs
srcu: Update cleanup_srcu_struct() comment
srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
srcu: Disable interrupts directly in srcu_gp_end()
rcu: Disable interrupts directly in rcu_gp_init()
rcu/tree: Reduce wake up for synchronize_rcu() common case
rcu/tasks: Fix stale task snaphot for Tasks Trace
tools/rcu: Add rcu-updaters.sh script
rcutorture: Add missing MODULE_DESCRIPTION() macros
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
...
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
Pull CPU hotplug updates from Thomas Gleixner:
"A small set of SMP/CPU hotplug updates:
- Reverse the order of iteration when freezing secondary CPUs for
hibernation.
This avoids that drivers like the Intel uncore performance counter
have to transfer the assignement of handling the per package uncore
events for every CPU in a package, which is a considerable speedup
on larger systems.
- Add a missing destroy_work_on_stack() invocation in
smp_call_on_cpu() to prevent debug objects to emit a false positive
warning when the stack is freed.
- Small cleanups in comments and a str_plural() conversion"
* tag 'smp-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu()
cpu/hotplug: Reverse order of iteration in freeze_secondary_cpus()
smp: Use str_plural() to fix Coccinelle warnings
cpu/hotplug: Fix typo in comment
Pull io_uring updates from Jens Axboe:
"Here are the io_uring updates queued up for 6.11.
Nothing major this time around, various minor improvements and
cleanups/fixes. This contains:
- Add bind/listen opcodes. Main motivation is to support direct
descriptors, to avoid needing a regular fd just for doing these two
operations (Gabriel)
- Probe fixes (Gabriel)
- Treat io-wq work flags as atomics. Not fixing a real issue, but may
as well and it silences a KCSAN warning (me)
- Cleanup of rsrc __set_current_state() usage (me)
- Add 64-bit for {m,f}advise operations (me)
- Improve performance of data ring messages (me)
- Fix for ring message overflow posting (Pavel)
- Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
for faster task_work signaling for io_uring, bundling it with this
pull (Pavel)
- Add Pavel as a co-maintainer
- Various cleanups (me, Thorsten)"
* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
io_uring/net: check socket is valid in io_bind()/io_listen()
kernel: rerun task_work while freezing in get_signal()
io_uring/io-wq: limit retrying worker initialisation
io_uring/napi: Remove unnecessary s64 cast
io_uring/net: cleanup io_recv_finish() bundle handling
io_uring/msg_ring: fix overflow posting
MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
io_uring/msg_ring: use kmem_cache_free() to free request
io_uring/msg_ring: check for dead submitter task
io_uring/msg_ring: add an alloc cache for io_kiocb entries
io_uring/msg_ring: improve handling of target CQE posting
io_uring: add io_add_aux_cqe() helper
io_uring: add remote task_work execution helper
io_uring/msg_ring: tighten requirement for remote posting
io_uring: Allocate only necessary memory in io_probe
io_uring: Fix probe of disabled operations
io_uring: Introduce IORING_OP_LISTEN
io_uring: Introduce IORING_OP_BIND
net: Split a __sys_listen helper for io_uring
net: Split a __sys_bind helper for io_uring
...
pid_list_fill_irq() runs via irq_work.
When CONFIG_PREEMPT_RT is disabled, it would run in irq_context.
so it shouldn't sleep while memory allocation.
Change gfp flags from GFP_KERNEL to GFP_NOWAIT to prevent sleep in
irq_work.
This change wouldn't impact functionality in practice because the worst-size
is 2K.
Cc: stable@goodmis.org
Fixes: 8d6e90983a ("tracing: Create a sparse bitmask for pid filtering")
Link: https://lore.kernel.org/20240704150226.1359936-1-yeoreum.yun@arm.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull misc vfs updates from Christian Brauner:
"Features:
- Support passing NULL along AT_EMPTY_PATH for statx().
NULL paths with any flag value other than AT_EMPTY_PATH go the
usual route and end up with -EFAULT to retain compatibility (Rust
is abusing calls of the sort to detect availability of statx)
This avoids path lookup code, lockref management, memory allocation
and in case of NULL path userspace memory access (which can be
quite expensive with SMAP on x86_64)
- Don't block i_writecount during exec. Remove the
deny_write_access() mechanism for executables
- Relax open_by_handle_at() permissions in specific cases where we
can prove that the caller had sufficient privileges to open a file
- Switch timespec64 fields in struct inode to discrete integers
freeing up 4 bytes
Fixes:
- Fix false positive circular locking warning in hfsplus
- Initialize hfs_inode_info after hfs_alloc_inode() in hfs
- Avoid accidental overflows in vfs_fallocate()
- Don't interrupt fallocate with EINTR in tmpfs to avoid constantly
restarting shmem_fallocate()
- Add missing quote in comment in fs/readdir
Cleanups:
- Don't assign and test in an if statement in mqueue. Move the
assignment out of the if statement
- Reflow the logic in may_create_in_sticky()
- Remove the usage of the deprecated ida_simple_xx() API from procfs
- Reject FSCONFIG_CMD_CREATE_EXCL requets that depend on the new
mount api early
- Rename variables in copy_tree() to make it easier to understand
- Replace WARN(down_read_trylock, ...) abuse with proper asserts in
various places in the VFS
- Get rid of user_path_at_empty() and drop the empty argument from
getname_flags()
- Check for error while copying and no path in one branch in
getname_flags()
- Avoid redundant smp_mb() for THP handling in do_dentry_open()
- Rename parent_ino to d_parent_ino and make it use RCU
- Remove unused header include in fs/readdir
- Export in_group_capable() helper and switch f2fs and fuse over to
it instead of open-coding the logic in both places"
* tag 'vfs-6.11.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
ipc: mqueue: remove assignment from IS_ERR argument
vfs: rename parent_ino to d_parent_ino and make it use RCU
vfs: support statx(..., NULL, AT_EMPTY_PATH, ...)
stat: use vfs_empty_path() helper
fs: new helper vfs_empty_path()
fs: reflow may_create_in_sticky()
vfs: remove redundant smp_mb for thp handling in do_dentry_open
fuse: Use in_group_or_capable() helper
f2fs: Use in_group_or_capable() helper
fs: Export in_group_or_capable()
vfs: reorder checks in may_create_in_sticky
hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode()
proc: Remove usage of the deprecated ida_simple_xx() API
hfsplus: fix to avoid false alarm of circular locking
Improve readability of copy_tree
vfs: shave a branch in getname_flags
vfs: retire user_path_at_empty and drop empty arg from getname_flags
vfs: stop using user_path_at_empty in do_readlinkat
tmpfs: don't interrupt fallocate with EINTR
fs: don't block i_writecount during exec
...
This reimplements commit 951bcae6c5 ("kallsyms: Avoid weak references
for kallsyms symbols") because I am not a big fan of PROVIDE().
As an alternative solution, this commit prepends one more kallsyms step.
KSYMS .tmp_vmlinux.kallsyms0.S # added
AS .tmp_vmlinux.kallsyms0.o # added
LD .tmp_vmlinux.btf
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Step 0 takes /dev/null as input, and generates .tmp_vmlinux.kallsyms0.o,
which has a valid kallsyms format with the empty symbol list, and can be
linked to vmlinux. Since it is really small, the added compile-time cost
is negligible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
To ensure non-reentrancy, __queue_work() attempts to enqueue a work
item to the pool of the currently executing worker. This is not only
unnecessary for an ordered workqueue, where order inherently suggests
non-reentrancy, but it could also disrupt the sequence if the item is
not enqueued on the newest PWQ.
Just queue it to the newest PWQ and let order management guarantees
non-reentrancy.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Fixes: 4c065dbce1 ("workqueue: Enable unbound cpumask update on ordered workqueues")
Cc: stable@vger.kernel.org # v6.9+
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit 74347be3edfd11277799242766edf844c43dd5d3)
Add a new helper to disable lockdep tracking entirely for a given class.
This is needed for bcachefs, which takes too many btree node locks for
lockdep to track. Instead, we have a single lockdep_map for "btree_trans
has any btree nodes locked", which makes more since given that we have
centralized lock management and a cycle detector.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull scheduler fixes from Borislav Petkov:
- Fix a performance regression when measuring the CPU time of a thread
(clock_gettime(CLOCK_THREAD_CPUTIME_ID,...)) due to the addition of
PSI IRQ time accounting in the hotpath
- Fix a task_struct leak due to missing to decrement the refcount when
the task is enqueued before the timer which is supposed to do that,
expires
- Revert an attempt to expedite detaching of movable tasks, as finding
those could become very costly. Turns out the original issue wasn't
even hit by anyone
* tag 'sched_urgent_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Move psi_account_irqtime() out of update_rq_clock_task() hotpath
sched/deadline: Fix task_struct reference leak
Revert "sched/fair: Make sure to try to detach at least one movable task"
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-12
We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).
The main changes are:
1) Improve BPF verifier by utilizing overflow.h helpers to check
for overflows, from Shung-Hsi Yu.
2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
when attr->attach_prog_fd was not specified, from Tengda Wu.
3) Fix arm64 BPF JIT when generating code for BPF trampolines with
BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
from Puranjay Mohan.
4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
in the first place and caused syzbot reports,
from Sebastian Andrzej Siewior.
5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
/KF_RCU-typed BPF kfuncs, from Matt Bobrowski.
6) Fix a long standing bug in libbpf with regards to handling of BPF
skeleton's forward and backward compatibility, from Andrii Nakryiko.
7) Annotate btf_{seq,snprintf}_show functions with __printf,
from Alan Maguire.
8) BPF selftest improvements to reuse common network helpers in sk_lookup
test and dropping the open-coded inetaddr_len() and make_socket() ones,
from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
bpf: use check_sub_overflow() to check for subtraction overflows
bpf: use check_add_overflow() to check for addition overflows
bpf: fix overflow check in adjust_jmp_off()
bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
bpf: annotate BTF show functions with __printf
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
selftests/bpf: Close obj in error path in xdp_adjust_tail
selftests/bpf: Null checks for links in bpf_tcp_ca
selftests/bpf: Use connect_fd_to_fd in sk_lookup
selftests/bpf: Use start_server_addr in sk_lookup
selftests/bpf: Use start_server_str in sk_lookup
selftests/bpf: Close fd in error path in drop_on_reuseport
selftests/bpf: Add ASSERT_OK_FD macro
selftests/bpf: Add backlog for network_helper_opts
selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
bpf: Remove tst_run from lwt_seg6local_prog_ops.
bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
...
====================
Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the event counting provided by misc.events is hierarchical,
it's not practical if user is only concerned with events of a
specified cgroup. Therefore, introduce misc.events.local collect events
specific to the given cgroup.
This is analogous to memory.events.local and pids.events.local.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
adjust_jmp_off() incorrectly used the insn->imm field for all overflow check,
which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case,
not the general jump instruction case. Fix it by using insn->off for overflow
check in the general case.
Fixes: 5337ac4c9b ("bpf: Fix the corner case with may_goto and jump to the 1st insn.")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240712080127.136608-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As reported by Mirsad [1] we still see format warnings in kernel/bpf/btf.o
at W=1 warning level:
CC kernel/bpf/btf.o
./kernel/bpf/btf.c: In function ‘btf_type_seq_show_flags’:
./kernel/bpf/btf.c:7553:21: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
7553 | sseq.showfn = btf_seq_show;
| ^
./kernel/bpf/btf.c: In function ‘btf_type_snprintf_show’:
./kernel/bpf/btf.c:7604:31: warning: assignment left-hand side might be a candidate for a format attribute [-Wsuggest-attribute=format]
7604 | ssnprintf.show.showfn = btf_snprintf_show;
| ^
Combined with CONFIG_WERROR=y these can halt the build.
The fix (annotating the structure field with __printf())
suggested by Mirsad resolves these. Apologies I missed this last time.
No other W=1 warnings were observed in kernel/bpf after this fix.
[1] https://lore.kernel.org/bpf/92c9d047-f058-400c-9c7d-81d4dc1ef71b@gmail.com/
Fixes: b3470da314 ("bpf: annotate BTF show functions with __printf")
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Suggested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240712092859.1390960-1-alan.maguire@oracle.com
What wq_update_pod() does is just to update the pwq of the specific
cpu. Rename it and update the comments.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The arguments @hotplug_cpu and @online are not used in wq_update_pod()
since the functions called by wq_update_pod() don't need them.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
