Pull irq fixes from Thomas Gleixner:
- Ensure ordering of memory and device I/O for IPIs on RISCV
The RISCV interrupt controllers use writel_relaxed() for generating
an IPI. That's a device I/O write which is not guaranteed to be
ordered against preceding memory writes. As a consequence a IPI
receiving CPU might not be able to observe the actual IPI data which
is required to handle it. Switch to writel() which contains the
necessary memory barriers to enforce ordering.
- Fix up the fallout of the MSI conversion in the MVEVBU ICU driver.
The conversion failed to handle the change of the data storage and
kept the original code which uses the domain::host_data pointer
unchanged. After the conversion domain::host_data points to the new
msi_domain_info structure and not longer to the MVEBU specific MSI
data, which is now stored in a member of msi_domain_info. This leads
to malfunction of the transalate() callback.
- Only handle the PMC in FIQ mode when it is configured that way.
The original check was incorrect as it did not explicitely check for
the proper conditions, which led to malfunctions of the PMU
interrupt.
- Improve Kconfig dependencies for the LAN966x Outband Interrupt
controller to avoid pointless pronmpts.
* tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured so
irqchip/irq-mvebu-icu: Fix access to msi_data from irq_domain::host_data
irqchip/riscv: Ensure ordering of memory writes and IPI writes
irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCI
dt-bindings: interrupt-controller: microchip,lan966x-oic: Clarify endpoint use
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
The ASPEED AST27XX interrupt controller(INTC) contains second level and
third level interrupt controller.
INTC0:
The second level INTC, which used to assert GIC if interrupt in INTC1 asserted.
INTC1_x:
The third level INTC, which used to assert INTC0 if interrupt in modules
of INTC asserted.
The relationship is like the following:
+-----+ +-------+ +---------+---module0
| GIC |---| INTC0 |--+--| INTC1_0 |---module1
| | | | | | |---...
+-----+ +-------+ | +---------+---module31
|
| +---------+---module0
+---| INTC1_1 |---module1
| | |---...
| +---------+---module31
...
| +---------+---module0
+---| INTC1_5 |---module1
| |---...
+---------+---module31
Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20241016022410.1154574-2-kevin_chen@aspeedtech.com
Add DT bindings for the Renesas RZ/V2H(P) Interrupt Controller.
Also add macros for the NMI and IRQ0-15 interrupts which map the
SPI0-16 interrupts on the RZ/V2H(P) SoC so that they can be
used in the first cell of the interrupt specifiers.
For the second cell of the interrupt specifier, since NMI, IRQn
and TINTn support different types of interrupts between themselves,
add helper macros to make it easier for the user to work out what's
available.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20241009230817.798582-2-fabrizio.castro.jz@renesas.com
The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
function to parser interrupt-map. So it doesn't consider '#address-size'
in parent interrupt controller, such as GIC.
When dt-binding verify interrupt-map, item data matrix is spitted at
incorrect position. So cause below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: interrupt-controller@14:
interrupt-map: [[0, 0, 1, 0, 0, 4, 1, 0], [1, 0, 1, 4, 2, 0, 1, 0], ...
is too short
Remove interrupt-map restriction to workaround this warning for
'fsl,ls1088a-extirq', 'fsl,ls2080a-extirq' and fsl,lx2160a-extirq.
Other keep the same restriction.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241007161823.811021-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Schemas for array properties should only have 1 level of array
constraints (e.g. items, maxItems, minItems). Sometimes the old
encoding of all properties into a matrix leaked into the schema, and
didn't matter for validation. Now the inner constraints are just
silently ignored as json-schema array keywords are ignored on scalar
values.
Generally, keep the inner constraints and drop the outer "items". With
gicv3 "mbi-alias" property, it is more appropriately a uint32 or uint64
as it is an address and size depends on "#address-cells".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925232409.2208515-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document and describe the compatibles for Apple A7-A11 SoCs.
There are three feature levels:
- apple,aic: No fast IPI, for A7-A10
- apple,t8015-aic: fast IPI, global only, for A11
- apple,t8103-aic: fast IPI with local and global support, for M1
Each feature level is an extension of the previous, for example, M1 will
also work with the A7 feature level.
All of A7-M1 gets its own SoC-specific compatible, and the "apple,aic"
compatible as a fallback.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240901034143.12731-2-towinchenmi@gmail.com
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/interrupt-controller@1e6c0080: failed to match any schema with compatible: ['aspeed,ast2400-vic']
The YAML DT schema defines an optional property, valid-sources, which
was not previously described in the prose binding. It is added to
document existing practice in the Aspeed devicetrees. Unfortunately
the property seems to predate the requirement that vendor-specific
properties be prefixed.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-1-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
Add a compatible string for the interrupt controller found on the
rtl930x SoCs. The interrupt controller has registers for VPE1 so these
are added as a second reg cell.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Convert device tree binding fsl,ls-scfg-msi to yaml format.
Additional changes:
- Include gic.h and use predefined macro in example.
- Remove label in example.
- Change node name to interrupt-controller in example.
- Fix error in example.
- ls1046a allow 4 irqs, other platform only 1 irq.
- Add $ref: msi-controller.yaml
- Add #msi-cells.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627144207.4003708-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
i.MX DT bindings for 6.11:
- Add compatible string for various new boards
- Drop Li Yang as maintainer for bindings as his email bounces
* tag 'imx-bindings-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards
dt-bindings: arm: add MBa8MP-RAS314 SBC
dt-bindings: arm: fsl: add i.MX93 9x9 QSB board
dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8
dt-bindings: Drop Li Yang as maintainer for all bindings
Link: https://lore.kernel.org/r/20240702142153.413061-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert the RISC-V Hart-Level Interrupt Controller (HLIC) to newer
DT schema, Created DT schema based on the .txt file which had
`compatible`, `#interrupt-cells` and `interrupt-controller` as
required properties.
Changes made with respect to original file:
- Changed the example to just use interrupt-controller instead of
using the whole cpu block
- Changed the example compatible string.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kanak Shilledar <kanakshilledar@gmail.com>
Link: https://lore.kernel.org/r/20240615021507.122035-2-kanakshilledar@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Remove Li Yang from all device tree bindings because mails to this
address are bouncing.
Commit fbdd90334a ("MAINTAINERS: Drop Li Yang as their email address
stopped working") already removed the entry from the MAINTAINERS but
didn't address all the in-file entries of the device tree bindings.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
