We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
execmem does not depend on modules, on the contrary modules use
execmem.
To make execmem available when CONFIG_MODULES=n, for instance for
kprobes, split execmem_params initialization out from
arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since at least kernel 6.1, flush_dcache_page() is called with IRQs
disabled, e.g. from aio_complete().
But the current implementation for flush_dcache_page() on NIOS2
unintentionally re-enables IRQs, which may lead to deadlocks.
Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the
flush_dcache_mmap_*lock() macros instead.
Link: https://lkml.kernel.org/r/ZOTF5WWURQNH9+iw@p100
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This does the simple pattern conversion of alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa to the lock_mm_and_find_vma()
helper. They all have the regular fault handling pattern without odd
special cases.
The remaining architectures all have something that keeps us from a
straightforward conversion: ia64 and parisc have stacks that can grow
both up as well as down (and ia64 has special address region checks).
And m68k, microblaze, openrisc, sparc64, and um end up having extra
rules about only expanding the stack down a limited amount below the
user space stack pointer. That is something that x86 used to do too
(long long ago), and it probably could just be skipped, but it still
makes the conversion less than trivial.
Note that this conversion was done manually and with the exception of
alpha without any build testing, because I have a fairly limited cross-
building environment. The cases are all simple, and I went through the
changes several times, but...
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nios2 equivalent of 26178ec11e "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page. It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).
Then after that throttling we return VM_FAULT_RETRY.
We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.
However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.
It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.
To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.
To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock. It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.
This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:
Before: 650.980 ms (+-1.94%)
After: 569.396 ms (+-1.38%)
I believe it could help more than that.
We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.
Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.
I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.
Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull dma-mapping updates from Christoph Hellwig:
- fix an integer overflow in the coherent pool (Kevin Grandemange)
- provide support for in-place uncached remapping and use that for
openrisc
- fix the arm coherent allocator to take the bus limit into account
* tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: merge __dma_supported into arm_dma_supported
ARM/dma-mapping: take the bus limit into account in __dma_alloc
ARM/dma-mapping: remove get_coherent_dma_mask
openrisc: use the generic in-place uncached DMA allocator
dma-direct: provide a arch_dma_clear_uncached hook
dma-direct: make uncached_kernel_address more general
dma-direct: consolidate the error handling in dma_direct_alloc_pages
dma-direct: remove the cached_kernel_address hook
dma-coherent: fix integer overflow in the reserved-memory dma allocation
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename the symbol to arch_dma_set_uncached, and pass a size to it as
well as allow an error return. That will allow reusing this hook for
in-place pagetable remapping.
As the in-place remap doesn't always require an explicit cache flush,
also detangle ARCH_HAS_DMA_PREP_COHERENT from ARCH_HAS_DMA_SET_UNCACHED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
dma-direct now finds the kernel address for coherent allocations based
on the dma address, so the cached_kernel_address hooks is unused and
can be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Commit 5ace77e0b4 ("nios2: remove __ioremap") removed the following code,
with the argument that cacheflag is always 0 and the expression would
therefore always be false.
if (IS_MAPPABLE_UNCACHEABLE(phys_addr) &&
IS_MAPPABLE_UNCACHEABLE(last_addr) &&
!(cacheflag & _PAGE_CACHED))
return (void __iomem *)(CONFIG_NIOS2_IO_REGION_BASE + phys_addr);
This did not take the "!" in the expression into account. Result is that
nios2 images no longer boot. Restoring the removed code fixes the problem.
Fixes: 5ace77e0b4 ("nios2: remove __ioremap")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
These are pure cache maintainance routines, so drop the unused
struct device argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Stop providing our own arch alloc/free hooks and just expose the segment
offset and use the generic dma-direct allocator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Patch series "provide a generic free_initmem implementation", v2.
Many architectures implement free_initmem() in exactly the same or very
similar way: they wrap the call to free_initmem_default() with sometimes
different 'poison' parameter.
These patches switch those architectures to use a generic implementation
that does free_initmem_default(POISON_FREE_INITMEM).
This was inspired by Christoph's patches for free_initrd_mem [1] and I
shamelessly copied changelog entries from his patches :)
[1] https://lore.kernel.org/lkml/20190213174621.29297-1-hch@lst.de/
This patch (of 2):
For most architectures free_initmem just a wrapper for the same
free_initmem_default(-1) call. Provide that as a generic implementation
marked __weak.
Link: http://lkml.kernel.org/r/1550515285-17446-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull nios2 updates from Ley Foon Tan:
"Most of updates are MMU related"
* tag 'nios2-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: Fix update_mmu_cache preload the TLB with the new PTE
nios2: update_mmu_cache preload the TLB with the new PTE
nios2: User address TLB flush break after finding the matching entry
nios2: flush_tlb_all use TLBMISC way auto-increment feature
nios2: improve readability of tlb functions
nios2: flush_tlb_mm flush only the pid
nios2: flush_tlb_pid can just restore TLBMISC once
nios2: TLBMISC writes do not require PID bits to be set
nios2: Use an invalid TLB entry address helper function
nios2: pte_clear does not need to flush TLB
nios2: flush_tlb_page use PID based flush
nios2: update_mmu_cache clear the old entry from the TLB
nios2: remove redundant 'default n' from Kconfig-s
nios2: ksyms: Add missing symbol exports
There is a bug in the TLB preload caused by the pid not being
shifted to the correct location in tlbmisc register.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Rather than flush the TLB entry when installing a new PTE to allow
the fast TLB reload to re-fill the TLB, just refill the TLB entry
when removing the old one.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Writes to TLBACC cause TLBMISC way to be incremented, which can be
used to iterate over ways in a set, then wrap back to zero ready for
the next set. This reduces register writes significantly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Currently flush_tlb_mm flushes the entire TLB. Switch it to doing a
PID aware flush. This also improves the readibility of flush_tlb_pid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
This matches the other functions in this file that use TLBMISC.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
TLBMISC_RD does not use PID bits, and when setting invalid TLBs,
the PID is not required because the address will not match.
This is just a tidy up.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
There is no need for complicated calculation for an invalid address
that maps to the same TLB index as the entry to be invalidated. Using
the TLB address plus the two top bits set puts the address into the
kernel TLB bypass range and still maps to the same cache line.
This is also a bug fix for flush_tlb_pid, which is currently unused,
but does not set PTEADDR to invalid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
flush_tlb_page is for flushing user pages, so it should not be using
flush_tlb_one (which flushes all pages).
This patch implements it with the flush_tlb_range, which is a user
flush that does the right thing.
flush_tlb_one is made static to mm/tlb.c because it's a bit confusing.
It is used in do_page_fault to flush the kernel non-linear mappings,
so that is replaced with flush_tlb_kernel_page. The end result is that
functionality is identical.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Fault paths like do_read_fault will install a Linux pte with the young
bit clear. The CPU will fault again because the TLB has not been
updated, this time a valid pte exists so handle_pte_fault will just
set the young bit with ptep_set_access_flags, which flushes the TLB.
The TLB is flushed so the next attempt will go to the fast TLB handler
which loads the TLB with the new Linux pte. The access then proceeds.
This design is fragile to depend on the young bit being clear after
the initial Linux fault. A proposed core mm change to immediately set
the young bit upon such a fault, results in ptep_set_access_flags not
flushing the TLB because it finds no change to the pte. The spurious
fault fix path only flushes the TLB if the access was a store. If it
was a load, then this results in an infinite loop of page faults.
This change adds a TLB flush in update_mmu_cache, which removes that
TLB entry upon the first fault. This will cause the fast TLB handler
to load the new pte and avoid the Linux page fault entirely.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
