Drop the include of dma-mapping.h in machdep.h, replace it with forward
declarations of struct device and struct pci_dev, and include time64.h
and page.h which are required for time64_t and pgprot_t respectively.
Add direct includes of some other headers to some files that were
getting them via machdep.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009051826.132805-2-mpe@ellerman.id.au
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
Fixes: 11ac3e87ce ("mm: cma: use pageblock_order as the single alignment")
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Sachin P Bappalige <sachinpb@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com
This patch refactors all CMA related initialization and alignment code
to within fadump_cma_init() which gets called in the end. This also means
that we keep [reserve_dump_area_start, boot_memory_size] page aligned
during fadump_reserve_mem(). Then later in fadump_cma_init() we extract the
aligned chunk and provide it to CMA. This inherently also fixes an issue in
the current code where the reserve_dump_area_start is not aligned
when the physical memory can have holes and the suitable chunk starts at
an unaligned boundary.
After this we should be able to call fadump_cma_init() independently
later in setup_arch() where pageblock_order is non-zero.
Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/805d6b900968fb9402ad8f4e4775597db42085c4.1729146153.git.ritesh.list@gmail.com
VDSO time functions do not call any other function, so they don't
need to save/restore LR. However, retrieving the address of VDSO data
page requires using LR hence saving then restoring it, which can be
heavy on some CPUs. On the other hand, VDSO functions on powerpc are
not standard functions and require a wrapper function to call C VDSO
functions. And that wrapper has to save and restore LR in order to
call the C VDSO function, so retrieving VDSO data page address in that
wrapper doesn't require additional save/restore of LR.
For random VDSO functions it is a bit different. Because the function
calls __arch_chacha20_blocks_nostack(), it saves and restores LR.
Retrieving VDSO data page address can then be done there without
additional save/restore of LR.
So lets implement __arch_get_vdso_rng_data() and simplify the wrapper.
It starts paving the way for the day powerpc will implement a more
standard ABI for VDSO functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a1a9bd0df508f1b5c04684b7366940577dfc6262.1727858295.git.christophe.leroy@csgroup.eu
The page containing VDSO time data is swapped with the one containing
TIME namespace data when a process uses a non-root time namespace.
For other data like powerpc specific data and RNG data, it means
tracking whether time namespace is the root one or not to know which
page to use.
Simplify the logic behind by moving time data out of first data page
so that the first data page which contains everything else always
remains the first page. Time data is in the second or third page
depending on selected time namespace.
While we are playing with get_datapage macro, directly take into
account the data offset inside the macro instead of adding that offset
afterwards.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/0557d3ec898c1d0ea2fc59fa8757618e524c5d94.1727858295.git.christophe.leroy@csgroup.eu
When commit 38f7b7067d ("powerpc/rtas: rtas_busy_delay() improvements")
was introduced, documentation about proper usage of sleep related functions
was outdated.
The commit message references the usage of a HZ=100 system. When using a
20ms sleep duration on such a system and therefore using msleep(), the
possible additional slack will be +10ms.
When the system is configured with HZ=100 the granularity of a jiffy and of
a bucket of the lowest timer wheel level is 10ms. To make sure a timer will
not expire early (when queueing of the timer races with an concurrent
update of jiffies), timers are always queued into the next bucket. This is
the reason for the maximal possible slack of 10ms.
fsleep() limits the maximal possible slack to 25% by making threshold
between usleep_range() and msleep() HZ dependent. As soon as the accuracy
of msleep() is sufficient, the less expensive timer list timer based
sleeping function is used instead of the more expensive hrtimer based
usleep_range() function. The udelay() will not be used in this specific
usecase as the lowest sleep length is larger than 1 millisecond.
Use fsleep() directly instead of using an own heuristic for the best
sleeping mechanism to use.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-13-dc8b907cb62f@linutronix.de
For gettimeofday, -ffixed-r30 was passed to work around a bug in Go
code, where the vDSO trampoline forgot to save and restore this register
across function calls. But Go requires a different trampoline for every
call, and there's no reason that new Go code needs to be broken and add
more bugs. So remove -ffixed-r30 for getrandom.
Fixes: 8072b39c3a ("powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240925175021.1526936-2-Jason@zx2c4.com
Pull powerpc fixes from Michael Ellerman:
- Fix build error in vdso32 when building 64-bit with COMPAT=y and -Os
- Fix build error in pseries EEH when CONFIG_DEBUG_FS is not set
Thanks to Christophe Leroy, Narayana Murty N, Christian Zigotzky, and
Ritesh Harjani.
* tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/eeh: move pseries_eeh_err_inject() outside CONFIG_DEBUG_FS block
powerpc/vdso32: Fix use of crtsavres for PPC64
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
Pull powerpc updates from Michael Ellerman:
- Reduce alignment constraints on STRICT_KERNEL_RWX and speed-up TLB
misses on 8xx and 603
- Replace kretprobe code with rethook and enable fprobe
- Remove the "fast endian switch" syscall
- Handle DLPAR device tree updates in kernel, allowing the deprecation
of the binary /proc/powerpc/ofdt interface
Thanks to Abhishek Dubey, Alex Shi, Benjamin Gray, Christophe Leroy,
Gaosheng Cui, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari
Bathini, Huang Xiaojia, Jinjie Ruan, Madhavan Srinivasan, Miguel Ojeda,
Mina Almasry, Narayana Murty N, Naveen Rao, Rob Herring (Arm), Scott
Cheloha, Segher Boessenkool, Stephen Rothwell, Thomas Zimmermann, Uwe
Kleine-König, Vaibhav Jain, and Zhang Zekun.
* tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (59 commits)
powerpc/atomic: Use YZ constraints for DS-form instructions
MAINTAINERS: powerpc: Add Maddy
powerpc: Switch back to struct platform_driver::remove()
powerpc/pseries/eeh: Fix pseries_eeh_err_inject
selftests/powerpc: Allow building without static libc
macintosh/via-pmu: register_pmu_pm_ops() can be __init
powerpc: Stop using no_llseek
powerpc/64s: Remove the "fast endian switch" syscall
powerpc/mm/64s: Restrict THP to Radix or HPT w/64K pages
powerpc/mm/64s: Move THP reqs into a separate symbol
powerpc/64s: Make mmu_hash_ops __ro_after_init
powerpc: Replace kretprobe code with rethook on powerpc
powerpc: pseries: Constify struct kobj_type
powerpc: powernv: Constify struct kobj_type
powerpc: Constify struct kobj_type
powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add
powerpc/pseries/dlpar: Remove device tree node for DLPAR IO remove
powerpc/pseries: Use correct data types from pseries_hp_errorlog struct
powerpc/vdso: Inconditionally use CFUNC macro
powerpc/32: Implement validation of emergency stack
...
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
Pull CPU hotplug updates from Thomas Gleixner:
- Prepare the core for supporting parallel hotplug on loongarch
- A small set of cleanups and enhancements
* tag 'smp-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Mark smp_prepare_boot_cpu() __init
cpu: Fix W=1 build kernel-doc warning
cpu/hotplug: Provide weak fallback for arch_cpuhp_init_parallel_bringup()
cpu/hotplug: Make HOTPLUG_PARALLEL independent of HOTPLUG_SMT
Extend getrandom() vDSO implementation to VDSO64.
Tested on QEMU on both ppc64_defconfig and ppc64le_defconfig.
Results from a Power9 (PowerNV):
~ # ./vdso_test_getrandom bench-single
vdso: 25000000 times in 0.787943615 seconds
libc: 25000000 times in 14.101887252 seconds
syscall: 25000000 times in 14.047475082 seconds
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
To be consistent with other VDSO functions, the function is called
__kernel_getrandom()
__arch_chacha20_blocks_nostack() fonction is implemented basically
with 32 bits operations. It performs 4 QUARTERROUND operations in
parallele. There are enough registers to avoid using the stack:
On input:
r3: output bytes
r4: 32-byte key input
r5: 8-byte counter input/output
r6: number of 64-byte blocks to write to output
During operation:
stack: pointer to counter (r5) and non-volatile registers (r14-131)
r0: counter of blocks (initialised with r6)
r4: Value '4' after key has been read, used for indexing
r5-r12: key
r14-r15: block counter
r16-r31: chacha state
At the end:
r0, r6-r12: Zeroised
r5, r14-r31: Restored
Performance on powerpc 885 (using kernel selftest):
~# ./vdso_test_getrandom bench-single
vdso: 25000000 times in 62.938002291 seconds
libc: 25000000 times in 535.581916866 seconds
syscall: 25000000 times in 531.525042806 seconds
Performance on powerpc 8321 (using kernel selftest):
~# ./vdso_test_getrandom bench-single
vdso: 25000000 times in 16.899318858 seconds
libc: 25000000 times in 131.050596522 seconds
syscall: 25000000 times in 129.794790389 seconds
This first patch adds support for VDSO32. As selftests cannot easily
be generated only for VDSO32, and because the following patch brings
support for VDSO64 anyway, this patch opts out all code in
__arch_chacha20_blocks_nostack() so that vdso_test_chacha will not
fail to compile and will not crash on PPC64/PPC64LE, allthough the
selftest itself will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In order to avoid two much duplication when we add new VDSO
functionnalities in C like getrandom, refactor common CFLAGS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Commit 08c18b63d9 ("powerpc/vdso32: Add missing _restgpr_31_x to fix
build failure") added _restgpr_31_x to the vdso for gettimeofday, but
the work on getrandom shows that we will need more of those functions.
Remove _restgpr_31_x and link in crtsavres.o so that we get all
save/restore functions when optimising the kernel for size.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When running in a non-root time namespace, the global VDSO data page
is replaced by a dedicated namespace data page and the global data
page is mapped next to it. Detailed explanations can be found at
commit 660fd04f93 ("lib/vdso: Prepare for time namespace support").
When it happens, __kernel_get_syscall_map and __kernel_get_tbfreq
and __kernel_sync_dicache don't work anymore because they read 0
instead of the data they need.
To address that, clock_mode has to be read. When it is set to
VDSO_CLOCKMODE_TIMENS, it means it is a dedicated namespace data page
and the global data is located on the following page.
Add a macro called get_realdatapage which reads clock_mode and add
PAGE_SIZE to the pointer provided by get_datapage macro when
clock_mode is equal to VDSO_CLOCKMODE_TIMENS. Use this new macro
instead of get_datapage macro except for time functions as they handle
it internally.
Fixes: 74205b3fc2 ("powerpc/vdso: Add support for time namespaces")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/all/ZtnYqZI-nrsNslwy@zx2c4.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
VFIO_EEH_PE_INJECT_ERR ioctl is currently failing on pseries
due to missing implementation of err_inject eeh_ops for pseries.
This patch implements pseries_eeh_err_inject in eeh_ops/pseries
eeh_ops. Implements support for injecting MMIO load/store error
for testing from user space.
The check on PCI error type (bus type) code is moved to platform
code, since the eeh_pe_inject_err can be allowed to more error
types depending on platform requirement. Removal of the check for
'type' in eeh_pe_inject_err() doesn't impact PowerNV as
pnv_eeh_err_inject() already has an equivalent check in place.
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240909140220.529333-1-nnmlinux@linux.ibm.com
Since commit 868941b144 ("fs: remove no_llseek"), no_llseek() is
simply defined to be NULL, and a NULL llseek means seeking is
unsupported.
So for statically defined file_operations, such as all these, there's no
need or benefit to set llseek = no_llseek.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240903111951.141376-1-mpe@ellerman.id.au
The non-standard "fast endian switch" syscall was added in 2008[1],
but was never widely used. It was disabled by default in 2017[2], and
there's no evidence it's ever been used since.
Remove it entirely.
A normal endian switch syscall was added in 2015[3].
[1]: 745a14cc26 ("[POWERPC] Add fast little-endian switch system call")
[2]: 529d235a0e ("powerpc: Add a proper syscall for switching endianness")
[3]: 727f13616c ("powerpc: Disable the fast-endian switch syscall by default")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823070830.1269033-1-mpe@ellerman.id.au
This is an adaptation of commit f3a112c0c4 ("x86,rethook,kprobes:
Replace kretprobe with rethook on x86") to powerpc.
Rethook follows the existing kretprobe implementation, but separates
it from kprobes so that it can be used by fprobe (ftrace-based
function entry/exit probes). As such, this patch also enables fprobe
to work on powerpc. The only other change compared to the existing
kretprobe implementation is doing the return address fixup in
arch_rethook_fixup_return().
Reference to other archs:
commit b57c2f1240 ("riscv: add riscv rethook implementation")
commit 7b0a096436 ("LoongArch: Replace kretprobe with rethook")
Note:
=====
In future, rethook will be only for kretprobe, and kretprobe
will be replaced by fprobe.
https://lore.kernel.org/all/172000134410.63468.13742222887213469474.stgit@devnote2/
We will adapt the above implementation for powerpc once its upstream.
Until then, we can have this implementation of rethook to serve
current kretprobe usecases.
Reviewed-by: Naveen Rao <naveen@kernel.org>
Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240830113131.7597-1-adubey@linux.ibm.com
'struct kobj_type' is not modified. It is only used in
kobject_init_and_add()/kobject_init() which takes
a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
7145 606 0 7751 1e47 arch/powerpc/kernel/cacheinfo.o
3663 384 16 4063 fdf arch/powerpc/kernel/secvar-sysfs.o
After:
======
text data bss dec hex filename
7193 558 0 7751 1e47 arch/powerpc/kernel/cacheinfo.o
3663 384 16 4063 fdf arch/powerpc/kernel/secvar-sysfs.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-1-huangxiaojia2@huawei.com
Linus noticed that the error handling in __arch_setup_additional_pages()
fails to clear the mm VDSO pointer if _install_special_mapping() fails.
In practice there should be no actual bug, because if there's an error the
VDSO pointer is cleared later in arch_setup_additional_pages().
However it's no longer necessary to set the pointer before installing the
mapping. Commit c1bab64360 ("powerpc/vdso: Move to
_install_special_mapping() and remove arch_vma_name()") reworked the code
so that the VMA name comes from the vm_special_mapping.name, rather than
relying on arch_vma_name().
So rework the code to only set the VDSO pointer once the mappings have
been installed correctly, and remove the stale comment.
Link: https://lkml.kernel.org/r/20240812082605.743814-4-mpe@ellerman.id.au
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At the time being, DATA TLB miss handlers use task PGDIR for user
addresses and swapper_pg_dir for kernel addresses.
Now that kernel part of swapper_pg_dir is copied into task PGDIR
at PGD allocation, it is possible to avoid the above logic and
always use task PGDIR.
But new kernel PGD entries can still be created after init, in
which case those PGD entries may miss in task PGDIR. This can be
handled in DATA TLB error handler.
However, it needs to be done in real mode because the missing
entry might be related to the stack.
So implement copy of missing PGD entry in DATA TLB miss handler
just after detection of invalid PGD entry.
Also replace comparison by same calculation as in previous patch
to know if an address belongs to a kernel or user segment.
Note that as mentioned in platforms/Kconfig.cputype, SMP is not
supported on 603 processors so there is no risk of the PGD entry
be populated during the fault.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a2ba8eeb1c845eeb9e46b6fe3a5e9f841df9a033.1724173828.git.christophe.leroy@csgroup.eu
Now that modules exec page tables are preallocated, the instruction
TLBmiss handler can use task PGDIR inconditionally.
Also revise the identification of user vs kernel user space by doing
a calculation instead of a comparison: Get the segment number and
subtract the number of the first kernel segment. The result is
positive for kernel addresses and negative for user addresses,
which means that upper 2 bits are 0 for kernel and 3 for user.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9a3242162ad2faab8019c698e501b326a126ee9e.1724173828.git.christophe.leroy@csgroup.eu
In preparation of next patch that will perform some additional
calculations to replace comparison, switch the use of r0 and r3
as r0 has some limitations in some instructions like 'addi/subi'.
Also remove outdated comments about the meaning of each register.
The registers are used for many things and it would be difficult
to accurately describe all things done with a given register. The
function is now small enough to get a global view without much
description.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/566af5e87685b1a85d3182549c0d520ce2d8877a.1724173828.git.christophe.leroy@csgroup.eu
At the time being, DATA TLB miss handlers use task PGDIR for user
addresses and swapper_pg_dir for kernel addresses.
Now that kernel part of swapper_pg_dir is copied into task PGDIR
at PGD allocation, it is possible to avoid the above logic and
always use task PGDIR.
But new kernel PGD entries can still be created after init, in
which case those PGD entries may miss in task PGDIR. This can be
handled in DATA TLB error handler.
However, it needs to be done in real mode because the missing
entry might be related to the stack.
So implement copy of missing PGD entry in the prolog of DATA TLB
ERROR handler just after the fixup of DAR.
Note that this is feasible because 8xx doesn't implement vmap or
ioremap with 8Mbytes pages but only 512kbytes pages which are at
PTE level.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7a76a923d2a111f1d843d8b20b4df0c65d2f4a7b.1724173828.git.christophe.leroy@csgroup.eu
This reverts commit bccc58986a.
When STRICT_KERNEL_RWX is selected, EXEC memory must stop where
RW memory start. When pinning iTLBs it means an 8M alignment for
RW data start. That may be acceptable on boards with a lot of
memory but one of my supported boards only has 32 Mbytes and this
forced alignment leads to a waste of almost 4 Mbytes with is more
than 10% of the total memory.
So revert commit bccc58986a ("powerpc/8xx: Always pin kernel text
TLB") but don't restore previous behaviour in ITLB miss handler
as now kernel PGD entries are copied into each process PGDIR.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/01b6780b860c8043b51a1ba9d83acfc6f2dde910.1724173828.git.christophe.leroy@csgroup.eu
Since commit 9132a2e82a ("powerpc/8xx: Define a MODULE area below
kernel text"), module exec space is below PAGE_OFFSET so not only
space above PAGE_OFFSET, but space above TASK_SIZE need to be seen
as kernel space.
Until now the problem went undetected because by default TASK_SIZE
is 0x8000000 which means address space is determined by just
checking upper address bit. But when TASK_SIZE is over 0x80000000,
PAGE_OFFSET is used for comparison, leading to thinking module
addresses are part of user space.
Fix it by using TASK_SIZE instead of PAGE_OFFSET for address
comparison.
Fixes: 9132a2e82a ("powerpc/8xx: Define a MODULE area below kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3f574c9845ff0a023b46cb4f38d2c45aecd769bd.1724173828.git.christophe.leroy@csgroup.eu
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These changes are for patch_instruction() uses on data. Unlike ppc64
these should not be incorrect as-is, but using the patch_uint() alias
better reflects what kind of data being patched and allows for
benchmarking the effect of different patch_* implementations (e.g.,
skipping instruction flushing when patching data).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-5-bgray@linux.ibm.com
Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:
Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
NIP: c1020240 LR: c10201d0 CTR: 00000000
REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000
GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
Call Trace:
[c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
[c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
[c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
[c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
[c13fdf30] [c0078904] parse_args+0x200/0x4c4
[c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
[c13fdff0] [c0000434] set_ivor+0x12c/0x168
Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
---[ end trace 0000000000000000 ]---
This is due to virt_addr_valid() using high_memory before it is set.
high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada209 ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
