Current implementation of fsl_edma3_attach_pd() does not provide a
cleanup path, resulting in a memory leak. For example,
dev_pm_domain_detach() is not called after dev_pm_domain_attach_by_id(),
and the device link created with the DL_FLAG_STATELESS is not released
explicitly.
Therefore, provide a cleanup function fsl_edma3_detach_pd() and call it
upon failure. Also add a devm_add_action_or_reset() call with this
function after a successful fsl_edma3_attach_pd().
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241221075712.3297200-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.
Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.
iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.
The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The edma feature individual IRQs for each DMA channel at some devices.
Given the presence of numerous eDMA instances, each with multiple channels,
IRQ request during probe results in an extensive list at /proc/interrupts.
However, a significant portion of these channels remains unused by the
system.
Request irq only when a DMA client driver requests a DMA channel.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240603152317.69917-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
In i.MX95's edma version 5, the TCD structure is extended to support 64-bit
addresses for fields like saddr and daddr. To prevent code duplication,
employ help macros to handle the fields, as the field names remain the same
between TCD and TCD64.
Change local variables related to TCD addresses from 'u32' to 'dma_addr_t'
to accept 64-bit DMA addresses.
Change 'vtcd' type to 'void *' to avoid direct use. Use helper macros to
access the TCD fields correctly.
Call 'dma_set_mask_and_coherent(64)' when TCD64 is supported.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231221153528.1588049-7-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Significant alterations have been made to the EDMA v3's register layout.
Now, each channel possesses a separate address space, encapsulating all
channel-related controls and statuses, including IRQs. There are changes
in bit position definitions as well. However, the fundamental control flow
remains analogous to the previous versions.
EDMA v3 was utilized in imx8qm, imx93, and will be in forthcoming chips.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230821161617.2142561-13-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Relocates the tcd into the fsl_dma_chan structure. This adjustment reduces
the need to reference back to fsl_edma_engine, paving the way for EDMA V3
support.
Unified the edma_writel and edma_writew functions for accessing TCD
(Transfer Control Descriptor) registers. A new macro is added that can
automatically detect whether a 32-bit or 16-bit access should be used
based on the structure field definition. This provide better support
64-bit TCD with future v5 version.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305271951.gmRobs3a-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230821161617.2142561-11-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Relocated the setup of chan_name from setup_irq() to fsl_chan init. This
change anticipates its future use in various locations.
For increased safety, sprintf has been replaced with snprintf. In addition,
The size of the fsl_chan->name[] array was expanded from 16 to 32.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230821161617.2142561-10-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The enum edma_version, which defines v1, v2, and v3, is a software concept
used to distinguish IP differences. However, it is not aligned with the
chip reference manual. According to the 7ulp reference manual, it should
be edma2. In the future, there will be edma3, edma4, and edma5, which
could cause confusion. To avoid this confusion, remove the edma_version
and instead use drvdata->flags to distinguish the IP difference.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230821161617.2142561-5-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 7144afd025 ("dmaengine: fsl-edma: add i.mx7ulp
edma2 version support") as this fails to build with module option due to
usage of of_irq_count() which is not an exported symbol as kernel
drivers are *not* expected to use it (rightly so).
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add edma2 for i.mx7ulp by version v3, since v2 has already
been used by mcf-edma.
The big changes based on v1 are belows:
1. only one dmamux.
2. another clock dma_clk except dmamux clk.
3. 16 independent interrupts instead of only one interrupt for
all channels.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are some differences between vf610 and next i.mx7ulp. Put such
differences into static driver data for distinguishing easily at
driver level. Change mcf-edma accordingly.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This mapping needs to be created in order for slave dma transfers
to work on systems with SMMU. The implementation mostly mimics the
one in pl330 dma driver, authored by Robin Murphy.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch fixes macros to use BIT() and GENMASK(), removing
also some unneeded.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds configurable registers (using __iomem addresses)
to allow the use of fsl-edma-common code with slightly different
edma module versions, as Vybrid (v1) and ColdFire (v2) are.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds a new fsl-edma-common module to allow new
mcf-edma module code to use most of the fsl-edma code.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
