Pull rdma updates from Jason Gunthorpe:
"Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp,
efa, cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of
scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them
to drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits)
RDMA/mlx5: Fix implicit ODP use after free
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
RDMA/qib: Constify 'struct bin_attribute'
RDMA/hfi1: Constify 'struct bin_attribute'
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event
RDMA/bnxt_re: Allocate dev_attr information dynamically
RDMA/bnxt_re: Pass the context for ulp_irq_stop
RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event
RDMA/bnxt_re: Query firmware defaults of CC params during probe
RDMA/bnxt_re: Add Async event handling support
bnxt_en: Add ULP call to notify async events
RDMA/mlx5: Fix indirect mkey ODP page count
MAINTAINERS: Update the bnxt_re maintainers
RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS
RDMA/rtrs: Add missing deinit() call
RDMA/efa: Align interrupt related fields to same type
RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error
RDMA/mlx5: Fix link status down event for MPV
RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts
...
If RocE is supported on the device, set the number of RoCE MSIX vectors
to the number of online CPUs + 1 and capped at these maximums:
VF: 2
NPAR: 5
PF: 64
For the PF, the maximum is now increased from the previous value
of 9 to get better performance for kernel applications.
Remove the unnecessary check for BNXT_FLAG_ROCE_CAP.
bnxt_set_dflt_ulp_msix() will only be called if the flag is set.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing scheme sets aside a number of MSIX/NQs for the RoCE
driver whether the RoCE driver is registered or not. This scheme
is not flexible and limits the resources available for the L2 rings
if RoCE is never used.
Modify the scheme so that the RoCE MSIX/NQs can be used by the L2
driver if they are not used for RoCE. The MSIX/NQs are now
represented by 3 fields. bp->ulp_num_msix_want contains the
desired default value, edev->ulp_num_msix_vec contains the
available value (but not necessarily in use), and
ulp_tbl->msix_requested contains the actual value in use by RoCE.
The L2 driver can dip into edev->ulp_num_msix_vec if necessary.
We need to add rtnl_lock() back in bnxt_register_dev() and
bnxt_unregister_dev() to synchronize the MSIX usage between L2 and
RoCE.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In its current form, bnxt_rdma_aux_device_init() not only initializes
the necessary data structures of the newly created aux device but also
adds the aux device into the aux bus subsytem. Refactor the logic into
separate functions, first function to initialize the aux device along
with the required resources and second, to actually add the device to
the aux bus subsytem.
This separation helps to create bnxt_en_dev much earlier and save its
resources separately.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modified the bnxt_en code to create and pre-configure RDMA devices
with the right MSI-X vector count for the ROCE driver to use.
This is to align the ROCE driver to the auxiliary device model which
will simply bind the driver without getting into PCI-related handling.
All PCI-related logic will now be in the bnxt_en driver.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Remove the SRIOV config callback which the bnxt_en was calling
to reconfigure the chip resources for a PF device when VFs are
created. The code is now modified to provision the VF resources
based on the total VF count instead of the actual VF count.
This allows the SRIOV config callback to be removed from the
list of ulp_ops.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Wherever possible use the function ops provided by auxiliary bus
instead of using proprietary ops.
Defined bnxt_re_suspend and bnxt_re_resume calls which can be
invoked by the bnxt_en driver instead of the ULP stop/start calls.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
For a single ULP user there is no need for complicating function
indirection calls. Remove all this complexity in favour of direct
function calls exported by the bnxt_en driver. This allows to
simplify the code greatly. Also remove unused ulp_async_notifier.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Use auxiliary driver interface for driver load, unload ROCE driver.
The driver does not need to register the interface using the netdev
notifier anymore. Removed the bnxt_re_dev_list which is not needed.
Currently probe, remove and shutdown ops have been implemented for
the auxiliary device.
Also remove exccessve validation checks for rdev.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Add auxiliary driver support.
An auxiliary device will be created if the hardware indicates
support for RDMA.
The bnxt_ulp_probe() function has been removed and a new
bnxt_rdma_aux_device_add() function has been added.
The bnxt_free_msix_vecs() and bnxt_req_msix_vecs() will now hold
the RTNL lock when they call the bnxt_close_nic()and bnxt_open_nic()
since the device close and open need to be protected under RTNL lock.
The operations between the bnxt_en and bnxt_re will be protected
using the en_ops_lock.
This will be used by the bnxt_re driver in a follow-on patch
to create ROCE interfaces.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
The purpose of this is to inform the RDMA driver the size of the doorbell
BAR that the L2 driver has mapped and the portion that is mapped
uncacheable. The unchaeable portion is shared with the RoCE driver.
Any remaining unmapped doorbell BAR can be used by the RDMA driver for
its own purpose. Currently, the entire L2 portion is mapped uncacheable.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We call bnxt_ulp_stop() to notify the RDMA driver that some error or
imminent reset is about to happen. After that we always call
some variants of bnxt_close().
In the next patch, we will integrate the recently added error
recovery with the RDMA driver. In response to ulp_stop, the
RDMA driver may free MSIX vectors and that will also trigger
bnxt_close(). To avoid bnxt_close() from being called twice,
we set a new flag after ulp_stop is called. If the RDMA driver
frees MSIX vectors while the new flag is set, we will not call
bnxt_close(), knowing that it will happen in due course.
With this change, we must make sure that the bnxt_close() call
after ulp_stop will reset IRQ. Modify bnxt_reset_task()
accordingly if we call ulp_stop.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For bnxt_en driver, stat_ctxs created will always be same as
cp_nr_rings. Remove extra variable that duplicates the value.
Also introduce bnxt_get_avail_stat_ctxs_for_en() helper to get
available stat_ctxs and bnxt_get_ulp_stat_ctxs() helper to return
number of stat_ctxs used by RDMA.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unused bnxt_subtract_ulp_resources(). Change
bnxt_get_max_func_irqs() to static since it is only locally used.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the driver needs to re-initailize the IRQ vectors, we make the
new ulp_irq_stop() call to tell the RDMA driver to disable and free
the IRQ vectors. After IRQ vectors have been re-initailized, we
make the ulp_irq_restart() call to tell the RDMA driver that
IRQs can be restarted.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current code, the range of MSIX vectors allocated for the RDMA
driver is disjoint from the network driver. This creates a problem
for the new firmware ring reservation scheme. The new scheme requires
the reserved completion rings/MSIX vectors to be in a contiguous
range.
Change the logic to allocate RDMA MSIX vectors to be contiguous with
the vectors used by bnxt_en on new firmware using the new scheme.
The new function bnxt_get_num_msix() calculates the exact number of
vectors needed by both drivers.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bnxt_en gets a PCI shutdown call, we need to have a new callback
to inform the RDMA driver to do proper shutdown and removal.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the network driver and RDMA driver operate on the same PCI function,
we need to create an interface to allow the RDMA driver to share resources
with the network driver.
1. Create a new bnxt_en_dev struct which will be returned by
bnxt_ulp_probe() upon success. After that, all calls from the RDMA driver
to bnxt_en will pass a pointer to this struct.
2. This struct contains additional function pointers to register, request
msix, send fw messages, register for async events.
3. If the RDMA driver wants to enable RDMA on the function, it needs to
call the function pointer bnxt_register_device(). A ulp_ops structure
is passed for RCU protected upcalls from bnxt_en to the RDMA driver.
4. The RDMA driver can call firmware APIs using the bnxt_send_fw_msg()
function pointer.
5. 1 stats context is reserved when the RDMA driver registers. MSIX
and completion rings are reserved when the RDMA driver calls
bnxt_request_msix() function pointer.
6. When the RDMA driver calls bnxt_unregister_device(), all RDMA resources
will be cleaned up.
v2: Fixed 2 uninitialized variable warnings.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
