Pull media updates from Mauro Carvalho Chehab:
- Sensor driver fixes
- remove dead TI wl128x FM radio driver
- Add support for the imx462 sensor at the IMX290 binding
- V4L2 pixel data transmitter and receiver documentation improvements
- Add support for MIPI Discovery and Configuration for C-PHY line
orders
- imx8-isi fixes and improvements
- stm32: dcmipp: add core support for the stm32mp25
- qcom: camss: Add sc7280 support
- Various fixes and enhancements
* tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits)
media: nuvoton: Fix an error check in npcm_video_ece_init()
media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer
media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
media: fix secfeed undefined when filter alloc fail
media: dt-bindings: trivial white-space and example cleanup
MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI
media: solo6x10: Use const 'struct bin_attribute' callback
media: saa7164: Remove unused values
staging: media: imx: fix OF node leak in imx_media_add_of_subdevs()
media: platform: exynos4-is: Remove unused __is_get_frame_size
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
media: mmp: Bring back registration of the device
media: cec: include linux/debugfs.h and linux/seq_file.h where needed
Revert "media: qcom: camss: Restructure camss_link_entities"
media: venus: Remove unused hfi_core_ping()
media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable
media: venus: Populate video encoder/decoder nodename entries
media: venus: Add support for static video encoder/decoder declarations
media: venus: match instance creation and destruction order
media: venus: destroy hfi session after m2m_ctx release
...
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
MediaTek soc driver updates for v6.13
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
* tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-svs: Call of_node_put(np) only once in svs_get_subsys_device()
soc: mediatek: mediatek-regulator-coupler: Support mt8188
soc: mediatek: mtk-cmdq: Move cmdq_instruction init to declaration
soc: mediatek: mtk-cmdq: Move mask build and append to function
soc: mediatek: Add MediaTek DVFS Resource Collector (DVFSRC) driver
dt-bindings: soc: mediatek: Add DVFSRC bindings for MT8183 and MT8195
Link: https://lore.kernel.org/r/20241104112625.161365-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/soc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Herve Codina <herve.codina@bootlin.com> # for fsl/qe/{qmc,tsa}.c
Acked-by: Bjorn Andersson <andersson@kernel.org> # qcom parts
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed
Link: https://lore.kernel.org/r/20241029074859.509587-2-u.kleine-koenig@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move, where possible, the initialization of struct cmdq_instruction
variables to their declaration to compress the code.
While at it, also change an instance of open-coded mask to use the
GENMASK() macro instead, and instances of `ret = func(); return ret;`
to the equivalent (but shorter) `return func()`.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Move the CMDQ_CODE_MASK packet build and append logic to a new
cmdq_pkt_mask() function; this reduces code duplication by 4x.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) is a
Hardware module used to collect all the requests from both software and the
various remote processors embedded into the SoC and decide about a minimum
operating voltage and a minimum DRAM frequency to fulfill those requests in
an effort to provide the best achievable performance per watt.
This hardware IP is capable of transparently performing direct register R/W
on all of the DVFSRC-controlled regulators and SoC bandwidth knobs.
This driver includes support for MT8183, MT8192 and MT8195.
Co-Developed-by: Dawei Chien <dawei.chien@mediatek.com>
[Angelo: Partial refactoring and cleanups]
Reviewed-by: Georgi Djakov <djakov@kerenl.org>
Link: https://lore.kernel.org/r/20240610085735.147134-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
All of mutex_mod and mutex_table_mod contain an array of bit
numbers, which can go from 0 to 63, it is hence not needed to
use an unsigned 32-bits integer to store that: change them to
unsigned 8-bits instead.
As for the mutex_sof table since this directly contains the values
to write to the DISP_MUTEXn_CTL register, which has only bits [13:0]
(so this register is effectively 14 bits long), change that to use
unsigned 16-bits.
The type of mutex_{mod,sof}_reg was also changed to 16 bits, as
the maximum value that those will ever have is 0x800, because it
calculates as 0x30 + (0x20 * n) where n's maximum value is 63.
This reduces module size and brings no functional changes.
Before:
text data bss dec hex filename
9929 512 0 10441 28c9 mtk-mutex.o
After:
text data bss dec hex filename
7425 512 0 7937 1f01 mtk-mutex.o
Link: https://lore.kernel.org/r/20240729122538.989855-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MediaTek driver updates for v6.11
This adds the previously missed Tone Curve Conversion (TCC)
MuteX bit to enable the same in MDP3 on the the MT8188 SoC,
disables 9-bit Alpha for display HDR support in MT8195 and
adds math operation support in the Global Command Engine for
all MediaTek SoCs, which will be used in the near future in
the ISP driver.
* tag 'mtk-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mtk-cmdq: Add cmdq_pkt_logic_command to support math operation
soc: mediatek: Disable 9-bit alpha in ETHDR
soc: mediatek: mtk-mutex: Add MDP_TCC0 mod to MT8188 mutex table
Link: https://lore.kernel.org/r/20240628093801.126013-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-npe.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for amlogic/meson-clk-measure.c
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240625-md-drivers-soc-v2-1-8bc7c03e3e69@quicinc.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add cmdq_pkt_logic_command to support math operation.
cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.
Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://lore.kernel.org/r/20240625083957.3540-1-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
In case we're running on a MediaTek SoC that is not declared in the
socinfo_data_table, print a message stating that and, with it, also
print out the read eFuse data: this allows to easily add a new SoC
in the table, granted that its actual soc/segment/marketing names
are already previously known.
This is especially useful when booting an already known SoC that
already has socinfo support, but has a different silicon version
and/or revision, hence different model information in the eFuses.
Link: https://lore.kernel.org/r/20240314113015.121940-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Most of the callers to this function do not require CMDQ support, it is
optional, so the missing property shouldn't cause an error message.
However, it could result on degraded performance, so the fact that it's
missing should still be alerted. Furthermore, the callers that do
require CMDQ support already log at the error level when an error is
returned.
Change the log message in this helper to be printed at the warning level
instead.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-log-dbg-v2-1-4975077173d0@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_pkt_acquire_event() function to support CMDQ user making
an instruction for acquiring event.
CMDQ users can use cmdq_pkt_acquire_event() as `mutex_lock`
and cmdq_pkt_clear_event() as `mutex_unlock` to protect the global
resource modified instructions between them.
cmdq_pkt_acquire_event() would wait for event to be cleared.
After event is cleared by cmdq_pkt_clear_event() in other GCE threads,
cmdq_pkt_acquire_event() would set event and keep executing next
instruction. So the mutex would work like this:
cmdq_pkt_acquire_event() /* mutex lock */
/* critical secton instructions that modified global resource */
cmdq_pkt_clear_event() /* mutex unlock */
Prevent the critical section instructions from being affected by other
GCE threads.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-5-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_pkt_poll_addr function to support CMDQ user making
an instruction for polling a specific address of hardware rigster
to check the value with or without mask.
POLL is a legacy operation in GCE, so it does not support SPR and
CMDQ_CODE_LOGIC. To support polling the register address which doesn't
have the subsys id, CMDQ users need to make an instruction with GPR and
CMDQ_CODE_MASK operation to move the register address to be poll into GPR.
Then users can make an POLL instruction with GPR to poll the register
address assigned in previous instruction.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307013458.23550-4-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
cmdq_pkt_create() and cmdq_pkt_destroy() is not suitable for
client drivers so each client driver has implement its own
function. This refinement would pass struct cmdq_pkt pointer into
cmdq_pkt_create(). In addition, client driver has the struct
cmdq_client information, so it's not necessary to store this
information in struct cmdq_pkt. After this refinement, client
drivers could use these helper funciton instead of implementing
its own version.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20240222154120.16959-8-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The mtk-socinfo grabs the NVMEM device devm_nvmem_device_get(), but then
proceeds to put the device directly with nvmem_device_put() if the read
is successful. If the device fails to probe and goes through the devres
release path, the device would be put a second time, triggering a
use-after-free error from KASAN.
Fix this by dropping the devres part. Since the NVMEM cell data is read
only once, there is no need to keep the reference around.
While at it, clean up the function to directly reference the NVMEM
device node and use that to find the NVMEM device, instead of finding it
by name, which is more fragile. The cell node is always a direct child
of the NVMEM device node, courtesy of the legacy NVMEM cell layout. Thus
of_get_child_by_name() is a better way of finding the cell. Last,
correctly put the device node once its use is over.
Fixes: 423a54da3c ("soc: mediatek: mtk-socinfo: Add driver for getting chip information")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240130095656.3712469-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some members of struct svs_bank are not changed during runtime, so those
are not variables but constants: move all of those to a new structure
called svs_bank_pdata and refactor the code to make use of that and
reorder members by size where possible.
This effectively moves at least 50 bytes to the text segment.
While at it, also uniform the thermal zone names across the banks.
Link: https://lore.kernel.org/r/20231121125044.78642-19-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The svs_init01() and svs_init02() functions are already checking if the
INIT01 and INIT02 modes are available - but that's done in for loops and
for each SVS bank.
Give those a shortcut to get out early if no SVS bank features the
desired init mode: this is especially done to avoid some locking in
the svs_init01(), but also to avoid multiple for loops to check the
same, when no bank supports a specific mode.
Link: https://lore.kernel.org/r/20231121125044.78642-17-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
