With the new deadlock cycle detector, it's critical that all held locks
be marked in a btree_path, because that's what the cycle detector
traverses - any locks that aren't correctly marked will cause deadlocks.
This changes the btree_path to allocate some btree_paths for the new
nodes, since until the final update is done we otherwise don't have a
path referencing them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With the upcoming cycle detector, we have to be careful about using
btree_node_lock_nopath - in particular, using it to take write locks can
cause deadlocks.
All held locks need to be tracked in a btree_path, so that the cycle
detector knows about them - unless we know that we cannot cause
deadlocks for other reasons: e.g. we are only taking read locks, or
we're in very early fsck (topology repair).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a type descriptor to btree_bkey_cached_common - there's no reason
not to since we've got padding that was otherwise unused, and this is a
nice cleanup (and helpful in later patches).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Improve our debugfs output, to help in debugging deadlocks: this shows,
for every btree node we print, the current number of readers/intent
locks/write locks held.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch
- tracks maximum bch2_trans_kmalloc() memory used in btree_transaction_stats
- makes it available in debugfs
- switches bch2_trans_init() to using that for the amount of memory to
preallocate, instead of the parameter passed in
This drastically reduces transaction restarts, and means we no longer
need to track this in the source code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we used two different bit arrays for tracking held btree
node locks. This patch switches to an array of two bit integers, which
will let us track, in a future patch, when we hold a write lock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Held btree locks are tracked in btree_path->nodes_locked and
btree_path->nodes_intent_locked. Upcoming patches are going to change
the representation in struct btree_path, so this patch switches to
proper helpers instead of direct access to these fields.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Start to centralize some of the locking code in a new file; more locking
code will be moving here in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- fsck_inode_rm() wasn't returning BCH_ERR_transaction_restart_nested
- change bch2_trans_verify_not_restarted() to call panic() - we don't
want these errors to be missed
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
iter->k needs to be consistent with iter->pos - required for
bch2_btree_iter_(rewind|advance) to work correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When returning a key from the key cache, in BTREE_ITER_WITH_KEY_CACHE
mode, we don't want to set should_be_locked on iter->path; we're not
returning a key from that path, so we donn't need to, and also since we
traversed the key cache iterator before setting should_be_locked on that
path it might be unlocked (if we unlocked, bch2_trans_relock() won't
have relocked it).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We should be calling btree_node_mem_ptr_set() before path_level_init(),
since we already touched the key that btree_node_mem_ptr_set() will
modify and path_level_init() will be doing the lookup in the child btree
node we're recursing to.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Instead of counting transaction restarts, count when the transaction is
restarted: if bch2_trans_begin() was called when the transaction wasn't
restarted we need to ensure restart_count is still incremented.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We need a way to check if the machinery for handling btree_paths with in
a transaction is behaving reasonably, as it often has not been - we've
had bugs with transaction path overflows caused by duplicate paths and
plenty of other things.
This patch tracks, per transaction fn, the most btree paths ever
allocated by that transaction and makes it available in debugfs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_path_put() is supposed to drop paths that aren't needed on
transaction restart, or to hold locks that we're supposed to keep until
transaction commit: but it was failing to free paths in some cases that
it should have, leading to transaction path overflows with lots of
duplicate paths.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
These were used more prior to getting rid of the in-memory bucket arrays
- they don't serve much purpose anymore, and deleting them lets us write
better assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Our types are exported to the tracepoint code, so it's not necessary to
break things out individually when passing them to tracepoints - we can
also call other functions from TP_fast_assign().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It doesn't make any sense to set should_be_locked on btree_paths that
aren't locked, and is often a bug - this patch adds assertions and fixes
some of those bugs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- use strlcpy(), not strncpy()
- add tracepoints for btree_path alloc and free
- give the tracepoint for key cache upgrade fail a proper name
- add a tracepoint for btree_node_upgrade_fail
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
bch2_btree_trans_to_text() is used to print btree_transactions owned by
other threads; thus, it needs to be particularly careful. This fixes a
null ptr deref caused by racing with the owning thread changing
path->l[].b.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Currently seeing a very rare and difficult to explain btree_path
inconsistency - this patch adds assertions to the only place that seems
to be missing them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
In CONFIG_BCACHEFS_DEBUG mode, we'll now randomly issue transaction
restarts - with a decaying probability based on the number of restarts
we've already had, to ensure that transactions eventually make forward
progress. This should help shake out some bugs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have error codes, with subtypes, we can switch to our own
error code for transaction restarts - and even better, a distinct error
code for each transaction restart reason: clearer code and better
debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This will help us improve nested transactions - we need to add
assertions that whenever an inner transaction handles a restart, it
still returns -EINTR to the outer transaction.
This also adds nested_lockrestart_do() and nested_commit_do() which use
the new counters to correctly return -EINTR when the transaction was
restarted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We now record the length of time btree locks are held and expose this in debugfs.
Enabled via CONFIG_BCACHEFS_LOCK_TIME_STATS.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need the caller name and a place to store our results, btree_trans provides this.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We try to ensure we never hold btree locks for too long - bcachefs tries
to be soft realtime. This adds a check when restarting a transaction,
where a transaction restart is cheap - if we've been holding locks for
too long, drop and retake them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When inserting a key type that's not valid for a given btree, we should
print out which btree we were inserting into.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, on every btree_iter_peek() operation we were searching the
journal keys, doing a full binary search - which was slow.
This patch fixes that by saving our position in the journal keys, so
that we only do a full binary search when moving our position backwards
or a large jump forwards.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is pretty expensive, and we've tested sufficiently with it now that
it doesn't need to be on by default.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds bch2_btree_iter_peek_all_levels(), which returns keys from
every level of the btree - interior nodes included - in monotonically
increasing order, soon to be used by the backpointers check & repair
code.
- BTREE_ITER_ALL_LEVELS can now be passed to for_each_btree_key() to
iterate thusly, much like BTREE_ITER_SLOTS
- The existing algorithm in bch2_btree_iter_advance() doesn't work with
peek_all_levels(): we have to defer the actual advancing until the
next time we call peek, where we have the btree path traversed and
uptodate. So, we add an advanced bit to btree_iter; when
BTREE_ITER_ALL_LEVELS is set bch2_btree_iter_advanced() just marks
the iterator as advanced.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds two new helpers to btree_iter.c for changing the level of a
path up or down - to be used by the new
bch2_btree_iter_peek_all_levels().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The new backpointers code will be using bch2_btree_iter_peek_slot() on
interior nodes - this patch updates peek_slot() to make that work.
- Pass the correct level to bch2_journal_keys_peek_slot()
- We should only set BTREE_ITER_CACHED or BTREE_ITER_WITH_KEY_CACHE
when using bch2_trans_iter_init(), not bch2_trans_node_iter_init()
- Update assertions
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When many journal replay keys have been overwritten,
bch2_journal_keys_peek() was taking excessively long to scan before it
found a key to return.
Fix this by introducing bch2_journal_keys_peek_upto() which takes a
parameter for the end of the range we want, so that we can terminate the
search much sooner, and replace all uses of bch2_journal_keys_peek()
with peek_upto() or peek_slot().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This fixes a bug where __bch2_btree_node_update_key() wasn't clearing
should_be_locked, leading to bch2_btree_path_traverse() always failing -
all callers of btree_path_make_mut() want should_be_locked cleared, so
do it there.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
bch2_btree_iter_next_node() was mucking with other btree_path state
without setting path->update to be consistent with the fact that the
path is very much no longer uptodate - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This turns bch2_dump_trans_updates() into a to_text() method - this way
it can be used by debug tracing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new error macro that also dumps transaction updates in addition to
doing an emergency shutdown - when a transaction update discovers or is
causing a fs inconsistency, it's helpful to see what updates it was
doing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
In BTREE_ITER_FILTER_SNAPHOTS mode, we skip over keys in unrelated
snapshots. When we hit the end of an inode, if the next inode(s) are in
a different subvolume, we could potentially have to skip past many keys
before finding a key we can return to the caller, so they can terminate
the iteration.
This adds a peek_upto() variant to solve this problem, to be used when
we know the range we're searching within.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
