This patch fixes a regression caused by a bad merge where
the handling of reserved SDMA queues was accidentally removed.
With the fix, the reserved SDMA queues are again correctly
marked as unavailable for allocation.
Fixes: a805889a15 ("drm/amdkfd: Update SDMA queue management for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shader read, write and atomic memory operations can be alerted to the
debugger as an address watch exception.
Allow the debugger to pass in a watch point to a particular memory
address per device.
Note that there exists only 4 watch points per devices to date, so have
the KFD keep track of what watch points are allocated or not.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debugger must be notified by any debugger subscribed exception
that comes from hardware interrupts.
If a debugger session exits, any exceptions it subscribed to may still
have interrupts in the interrupt ring buffer or KGD/KFD pipeline.
To prevent a new session from inheriting stale interrupts, when a new
queue is created, open an interrupt drain and allow the IH ring to drain
from a timestamped checkpoint. Then inject a custom IV so that once
the custom IV is picked up by the KFD, it's safe to close the drain
and proceed with queue creation.
The drain must also be on debug disable as SW interrupts may still
be processed. Drain at this time and clear all the exception status.
The debugger may also not be attached nor subscibed to certain
exceptions so forward them directly to the runtime.
GFX10 also requires its own IV processing, hence the creation of
kfd_int_process_v10.c. This is because the IV from SQ interrupts are
packed into a new continguous format unlike GFX9. To make this clear,
a separate interrupting handling code file was created.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain boards with GC IP 11.0.3 need slightly different handling
in the shader compiler due to board specific bounding box
optimizations.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all the asic needs xcp. ensure check xcp availabity
before accessing its member.
v2: add missing change in kfd_topology.c
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename smv_migrate_init to a better name kgd2kfd_init_zone_device
because it setup zone devive pgmap for page migration and keep it in
kfd_migrate.c to access static functions svm_migrate_pgmap_ops. Call it
only once in amdgpu_device_ip_init after adev ip blocks are initialized,
but before amdgpu_amdkfd_device_init initialize kfd nodes which enable
SVM support based on pgmap.
svm_range_set_max_pages is called by kgd2kfd_device_init everytime after
switching compute partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_migrate_init set the max svm range pages based on the KFD nodes
partition size. APU mode don't init pgmap because there is no migration.
kgd2kfd_device_init calls svm_migrate_init after KFD nodes allocation
and initialization.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to track memory usage on a per partition basis. To do
that, store the local memory information in KFD node instead
of kfd device.
v2: squash in fix ("amdkfd: Use mem_id to access mem_partition info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show KFD node memory partition id and size, add helper function
KFD_XCP_MEMORY_SIZE to get kfd node memory size, will be used
later to support memory accounting per partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of start xcc id and number of xcc per node, use the xcc mask
which is the mask of logical ids of xccs belonging to a parition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not required to take lock on all cases while querying partition
mode. Querying partition mode during KFD init process doesn't need to
take a lock. Init process after a switch will already be happening under
lock. Control the behaviour by adding flags to xcp_query_partition_mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd node allocation outside kfd->num_nodes loop is not needed and causes
memory leak because kfd->num_nodes is at least equal to 1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFXv9.4.3, use SOC level partition switch implementation rather than
keeping them at GFX IP level. Change the exisiting implementation in
GFX IP for keeping partition mode and restrict it to only GFX related
switch.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX9.4.3 will support dynamic repartitioning of the GPU through sysfs.
Add device repartitioning support in KFD to repartition GPU from one
mode to other.
v2: squash in fix ("drm/amdkfd: Fix warning kgd2kfd_unlock_kfd defined but not used")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, even if kfd_locked is set, a process is first
created and then removed to work around a race condition
in updating kfd_locked flag. Rework kfd_locked handling to
ensure no processes is created if kfd_locked is set. This
is achieved by updating kfd_locked under kfd_processes_mutex.
With this there is no need for kfd_locked to be an atomic
counter. Instead, it can be a regular integer.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of number of XCCs, keep a mask of XCCs for the exact XCCs
available on the ASIC. XCC configuration could differ based on
different ASIC configs.
v2:
Rename num_xcd to num_xcc (Hawking)
Use smaller xcc_mask size, changed to u16 (Le)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The local memory info needs to be fetched before the GPU node is added
to topology. Without this, the sysfs is incorrectly populated and the
size is reported as 0. This was causing rocr tests to fail. This issue
was caused because of a bad merge.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PSP TA will only provide xGMI topology info for links between GPU
sockets so links between partitions from different sockets will be
hardcoded as 3 xGMI hops with 1 hops weighted as xGMI and 2 hops
weighted with a new intra-socket weight to indicate the longest
possible distance.
If the link between a partition and the CPU is non-PCIe, then assume
the CPU (CCDs) is located within the same socket as the partition
and represent the link as an intra-socket weighted single hop XGMI link
with memory bandwidth.
Links between partitions within a single socket will be abstracted as
single hop xGMI links weighted with the new intra-socket weight and
will have memory bandwidth.
Finally, use the unused function bits in the location ID to represent the
coordinates of the compute partition within its socket.
A follow on patch will resolve the requirement for GPU socket xGMI
link representation sometime later.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates SDMA queue management for multi XCC in GFX9.4.3.
- Allocate/deallocate SDMA queues from the correct SDMA engines
based on the partition mode.
- Updates the kgd2kfd interface to fetch the correct SDMA register
addresses.
- It also fixes dumping correct SDMA queue info in debugfs.
v2: squash in fix "drm/amdkfd: Fix XGMI SDMA user-mode queue allocation"
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces multi-partition support in KFD.
This patch includes:
- Support for maximum 8 spatial partitions in KFD.
- Initialize one HIQ per partition.
- Management of VMID range depending on partition mode.
- Management of doorbell aperture space between all
partitions.
- Each partition does its own queue management, interrupt
handling, SMI event reporting.
- IOMMU, if enabled with multiple partitions, will only work
on first partition.
- SPM is only supported on the first partition.
- Currently, there is no support for resetting individual
partitions. All partitions will reset together.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.
This is the first step in adding compute partition support in KFD.
v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New GC (v9.4.3) and ATHUB (v1.8.0) versions
are used. Add kgd_gfx_v9_4_3_*
functions if registers in use of kgd_gfx_v9_*
functions are changed or have different offset.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CP_HQD_HQ_STATUS0[29] bit will be used by CPFW to acknowledge whether
PCIe atomics are supported. The default value of this bit is set
to 0. Driver will check whether PCIe atomics are supported and set the
bit to 1 if supported. This will force CPFW to use real atomic ops.
If the bit is not set, CPFW will default to read/modify/write using the
firmware itself.
This is applicable only to GFX11 RS64 CP with MEC FW >= 509. If MEC
FW < 509 and for all GFX11 F32 CP, PCIe atomics needs to be supported
else it will skip the device.
This commit also involves moving amdgpu_amdkfd_device_probe() function
call after per-IP early_init loop in amdgpu_device_ip_early_init()
function so as to check for RS64 enabled device.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Check new exception bits in TRAPSTS register
Remove single step exception workaround, now part of
exception bits
v2:
GC 9.4.3 uses ttmp11 to store {1’b0, dispatch index [24:0],
wave_id_in_workgroup[5:0]}, so use ttmp13 instead of ttmp11 to
preserve ib_sts. (Laurent)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Laurent Morichetti <Laurent.Morichetti@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is only one engine in sdma 6.0.1, the total number of
reserved queues should be 2, reflect this number in bitmap as well.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On the GC 10.3.7 platform the initial MEC release version #3 can support
atomic operation,so need correct and set its MEC atomic support version to #3.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Output user queue eviction and restore event. User queue eviction may be
triggered by svm or userptr MMU notifier, TTM eviction, device suspend
and CRIU checkpoint and restore.
User queue restore may be rescheduled if eviction happens again while
restore.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on gfx10 with following changes:
- GPR_ALLOC.VGPR_SIZE field moved (and size corrected in gfx10)
- s_sendmsg_rtn_b64 replaces some s_sendmsg/s_getreg
- Buffer instructions no longer have direct-to-LDS modifier
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
