Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
Add bindings for the MediaTek External Memory Interface Interconnect,
which providers support system bandwidth requirements through Dynamic
Voltage Frequency Scaling Resource Collector (DVFSRC) hardware.
This adds bindings for MediaTek MT8183 and MT8195 SoCs.
Note that this is modeled as a subnode of DVFSRC for multiple reasons:
- Some SoCs have more than one interconnect on the DVFSRC (and two
different kinds of EMI interconnect, and also a SMI interconnect);
- Some boards will want to not enable the interconnect driver because
some of those are not battery powered (so they just keep the knobs
at full thrust from the bootloader and never care scaling busses);
- Some DVFSRC interconnect features may depend on firmware.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240610085735.147134-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The downstream kernel has infrastructure for passing votes from different
interconnect nodes onto different RPMh RSCs. This neither implemented, not
is going to be implemented upstream (in favor of a different solution
using ICC tags through the same node).
Unfortunately, as it happens, meaningless (in the upstream context) parts
of the vendor driver were copied, ending up causing havoc - since all
"per-RSC" (in quotes because they all point to the main APPS one) BCMs
defined within the driver overwrite the value in RPMh on every
aggregation.
To both avoid keeping bogus code around and possibly introducing
impossible-to-track-down bugs (busses shutting down for no reason), get
rid of the duplicated ICC node definitions.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-2-70723e08d5f6@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
SM8250 (like SM8150 but unlike all other QUP-equipped SoCs) doesn't
provide a qup-core path. Adjust the bindings and drivers as necessary,
and then describe the icc paths in the device tree. This makes it possible
for interconnect sync_state succeed so long as you don't use UFS.
* icc-sm8250-qup
dt-bindings: interconnect: qcom,rpmh: Add SM8250 QUP virt
dt-bindings: interconnect: qcom,sm8250: Add QUP virt
interconnect: qcom: sm8250: Fix QUP0 nodes
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Commits 2f3724930e ("interconnect: qcom: sc7180: Drop IP0
interconnects") and 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0
interconnects") removed IP0 interconnects (and ipa-virt devices support)
in favour of the RPMH clocks. Follow this example for other platforms
defining IP0 RPMH resource. While we are at it, remove several leftover
from the mentioned patches.
* icc-ip0-migration:
interconnect: qcom: sdx55: drop IP0 remnants
interconnect: qcom: sc7180: drop IP0 remnants
interconnect: move ignore_list out of of_count_icc_providers()
interconnect: qcom: sm8150: Drop IP0 interconnects
interconnect: qcom: sm8250: Drop IP0 interconnects
interconnect: qcom: sc8180x: Drop IP0 interconnects
interconnect: qcom: sc8280xp: Drop IP0 interconnects
dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
dt-bindings: interconnect: qcom: drop IPA_CORE related defines
Link: https://lore.kernel.org/r/20230109002935.244320-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patchset is to support i.MX8MP NoC settings, i.MX8MP NoC initial
value after power up is invalid, need set a valid value after related
power domain up.
This patchset also includes two patch[1,2] during my development to enable
the ICC feature for i.MX8MP.
I not include ddrc DVFS in this patchset, ths patchset is only to
support NoC value mode/priority/ext_control being set to a valid value
that suggested by i.MX Chip Design Team. The value is same as NXP
downstream one inside Arm Trusted Firmware:
https://source.codeaurora.org/external/imx/imx-atf/tree/plat/imx/imx8m/i/gpc.c?h=lf_v2.4#n97
Link: https://lore.kernel.org/r/20220703091132.1412063-1-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.
* icc-sc8180x
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: sc8180x: Modernize sc8180x probe
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Mark some BCMs keepalive
Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add support for QCM2290 including a few prep changes.
* icc-qcm2290
interconnect: icc-rpm: Define ICC device type
interconnect: icc-rpm: Add QNOC type QoS support
interconnect: icc-rpm: Support child NoC device probe
dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support
interconnect: qcom: Add QCM2290 driver support
Link: https://lore.kernel.org/r/20211215002324.1727-1-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
