Since commit 08ac454e25 ("libbpf: Auto-attach struct_ops BPF maps in
BPF skeleton"), libbpf automatically calls bpf_map__attach_struct_ops()
on every struct_ops it sees in the bpf object. The problem is that
our test bpf object has many of them but only one should be manually
loaded at a time, or we end up locking the syscall.
Link: https://patch.msgid.link/20240723-fix-6-11-bpf-v1-2-b9d770346784@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Similar to test_multiply_events_wq: we receive one event and inject a
new one. But given that this time we are already in the event hook, we
can use hid_bpf_try_input_report() directly as this function will not
sleep.
Note that the injected event gets processed before the original one this
way.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-12-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We add 3 new tests:
- first, we make sure we can prevent the output_report to happen
- second, we make sure that we can detect that a given hidraw client
was actually doing the request, and for that client only, call ourself
hid_bpf_hw_output_report(), returning a custom value
- last, we ensure that we can not loop between hooks for
hid_hw_output_report() and manual calls to hid_bpf_hw_output_report()
from that same hook
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-8-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We add 3 new tests:
- first, we make sure we can prevent the raw_request to happen
- second, we make sure that we can detect that a given hidraw client
was actually doing the request, and for that client only, call ourself
hid_bpf_hw_request(), returning a custom value
- last, we ensure that we can not loop between hooks for
hid_hw_raw_request() and manual calls to hid_bpf_hw_request() from that
hook
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-6-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
We need to add some out of proximity intermediate state when moving
back and forth with the eraser mode as it can only be triggered by
physically returning the pen, meaning that the tolerated transitions
can never happen.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-15-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Those tablets don't need special initialization, but are reporting
the events with the wrong usages:
- tip switch is used when the eraser should be used
- eraser is used instead of the secondary barrel switch
Add tests for those so we don't regress in the future.
Currently we set x/y tilt to 0 to not trigger the bpf program
compensate_coordinates_by_tilt()
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-13-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
All the *_WITH*BUTTON states were almost identical except for the
button itself.
I need to add a new device with a third button, and adding a bunch of
states is going to be quite cumbersome.
So convert the `button` parameter of PenState as a boolean, and store
which button is the target as an argument to all functions that need it.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-12-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
few required changes:
- we need to count how many times a udev 'bind' event happens
- we need to tell `udev-hid-bpf` to not automatically attach the
provided HID-BPF objects
- we need to manually attach the ones from the kernel tree, and wait
for the second udev 'bind' event to happen
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-11-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
Test for proper driver behavior when the touch confidence bit is set
or cleared. Test the three flavors of touch confidence loss (tipswitch
cleared before confidence, tipswitch and confidence cleared at the same
time, and tipswitch only cleared when touch is actually removed). Also
test two flavors of touch confidence gain (confidence added to a touch
that was "never" confident, and confidence added to a touch that was
previously confident).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To accommodate for legacy devices, we rely on the last state of a
transition to be valid:
for example when we test PEN_IS_OUT_OF_RANGE to PEN_IS_IN_CONTACT,
any "normal" device that reports an InRange bit would insert a
PEN_IS_IN_RANGE state between the 2.
This is of course valid, but this solution prevents to detect false
releases emitted by some firmware:
when pressing an "eraser mode" button, they might send an extra
PEN_IS_OUT_OF_RANGE that we may want to filter.
So define 2 sets of transitions: one that is the ideal behavior, and
one that is OK, it won't break user space, but we have serious doubts
if we are doing the right thing. And depending on the test, either
ask only for valid transitions, or tolerate weird ones.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-13-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turns out that there are transitions that are unlikely to happen:
for example, having both the tip switch and a button being changed
at the same time (in the same report) would require either a very talented
and precise user or a very bad hardware with a very low sampling rate.
So instead of manually building the button test by hand and forgetting
about some cases, let's reuse the state machine and transitions we have.
This patch only adds the states and the valid transitions. The actual
tests will be replaced later.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-10-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
For the hid-bpf tests to compile, we need to have the definition of
struct hid_bpf_ctx. This definition is an internal one from the kernel
and it is supposed to be defined in the generated vmlinux.h.
This vmlinux.h header is generated based on the currently running kernel
or if the kernel was already compiled in the tree. If you just compile
the selftests without compiling the kernel beforehand and you are running
on a 6.2 kernel, you'll end up with a vmlinux.h without the hid_bpf_ctx
definition.
Use the clever trick from tools/testing/selftests/bpf/progs/bpf_iter.h
to force the definition of that symbol in case we don't find it in the
BTF and also add __attribute__((preserve_access_index)) to further
support CO-RE functionality for these tests.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # Build
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230825-wip-selftests-v3-1-639963c54109@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
