mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-19 08:14:25 +00:00
9cb15478916e849d62a6ec44b10c593b9663328c
544 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
edb0e8f6e2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
||
Paolo Bonzini
|
3ecf162a31 |
Merge tag 'kvm-x86-xen-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM Xen changes for 6.15 - Don't write to the Xen hypercall page on MSR writes that are initiated by the host (userspace or KVM) to fix a class of bugs where KVM can write to guest memory at unexpected times, e.g. during vCPU creation if userspace has set the Xen hypercall MSR index to collide with an MSR that KVM emulates. - Restrict the Xen hypercall MSR indx to the unofficial synthetic range to reduce the set of possible collisions with MSRs that are emulated by KVM (collisions can still happen as KVM emulates Hyper-V MSRs, which also reside in the synthetic range). - Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config. - Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID entries when updating PV clocks, as there is no guarantee PV clocks will be updated between TSC frequency changes and CPUID emulation, and guest reads of Xen TSC should be rare, i.e. are not a hot path. |
||
Thomas Huth
|
8a141be323 |
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for UAPI headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Brian Gerst <brgerst@gmail.com> Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com |
||
Manali Shukla
|
fa662c9080 |
KVM: SVM: Add Idle HLT intercept support
Add support for "Idle HLT" interception on AMD CPUs, and enable Idle HLT interception instead of "normal" HLT interception for all VMs for which HLT-exiting is enabled. Idle HLT provides a mild performance boost for all VM types, by avoiding a VM-Exit in the scenario where KVM would immediately "wake" and resume the vCPU. Idle HLT makes HLT-exiting conditional on the vCPU not having a valid, unmasked interrupt. Specifically, a VM-Exit occurs on execution of HLT if and only if there are no pending V_IRQ or V_NMI events. Note, Idle is a replacement for full HLT interception, i.e. enabling HLT interception would result in all HLT instructions causing unconditional VM-Exits. Per the APM: When both HLT and Idle HLT intercepts are active at the same time, the HLT intercept takes priority. This intercept occurs only if a virtual interrupt is not pending (V_INTR or V_NMI). For KVM's use of V_IRQ (also called V_INTR in the APM) to detect interrupt windows, the net effect of enabling Idle HLT is that, if a virtual interupt is pending and unmasked at the time of HLT, the vCPU will take a V_IRQ intercept instead of a HLT intercept. When AVIC is enabled, Idle HLT works as intended: the vCPU continues unimpeded and services the pending virtual interrupt. Note, the APM's description of V_IRQ interaction with AVIC is quite confusing, and requires piecing together implied behavior. Per the APM, when AVIC is enabled, V_IRQ *from the VMCB* is ignored: When AVIC mode is enabled for a virtual processor, the V_IRQ, V_INTR_PRIO, V_INTR_VECTOR, and V_IGN_TPR fields in the VMCB are ignored. Which seems to contradict the behavior of Idle HLT: This intercept occurs only if a virtual interrupt is not pending (V_INTR or V_NMI). What's not explicitly stated is that hardware's internal copy of V_IRQ (and related fields) *are* still active, i.e. are presumably used to cache information from the virtual APIC. Handle Idle HLT exits as if they were normal HLT exits, e.g. don't try to optimize the handling under the assumption that there isn't a pending IRQ. Irrespective of AVIC, Idle HLT is inherently racy with respect to the vIRR, as KVM can set vIRR bits asychronously. No changes are required to support KVM's use Idle HLT while running L2. In fact, supporting Idle HLT is actually a bug fix to some extent. If L1 wants to intercept HLT, recalc_intercepts() will enable HLT interception in vmcb02 and forward the intercept to L1 as normal. But if L1 does not want to intercept HLT, then KVM will run L2 with Idle HLT enabled and HLT interception disabled. If a V_IRQ or V_NMI for L2 becomes pending and L2 executes HLT, then use of Idle HLT will do the right thing, i.e. not #VMEXIT and instead deliver the virtual event. KVM currently doesn't handle this scenario correctly, e.g. doesn't check V_IRQ or V_NMI in vmcs02 as part of kvm_vcpu_has_events(). Do not expose Idle HLT to L1 at this time, as supporting nested Idle HLT is more complex than just enumerating the feature, e.g. requires KVM to handle the aforementioned scenarios of V_IRQ and V_NMI at the time of exit. Signed-off-by: Manali Shukla <Manali.Shukla@amd.com> Reviewed-by: Nikunj A Dadhania <nikunj@amd.com> Link: https://bugzilla.kernel.org/attachment.cgi?id=306250 Link: https://lore.kernel.org/r/20250128124812.7324-3-manali.shukla@amd.com [sean: rewrite changelog, drop nested "support"] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
Sean Christopherson
|
5c17848134 |
KVM: x86/xen: Restrict hypercall MSR to unofficial synthetic range
Reject userspace attempts to set the Xen hypercall page MSR to an index outside of the "standard" virtualization range [0x40000000, 0x4fffffff], as KVM is not equipped to handle collisions with real MSRs, e.g. KVM doesn't update MSR interception, conflicts with VMCS/VMCB fields, special case writes in KVM, etc. While the MSR index isn't strictly ABI, i.e. can theoretically float to any value, in practice no known VMM sets the MSR index to anything other than 0x40000000 or 0x40000200. Cc: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20250215011437.1203084-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
0f8e26b38d |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
||
Rick Edgecombe
|
9364789567 |
KVM: x86: Add a VM type define for TDX
Add a VM type define for TDX. Future changes will need to lay the ground work for TDX support by making some behavior conditional on the VM being a TDX guest. Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Message-ID: <20240718211230.1492011-4-rick.p.edgecombe@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Suma Hegde
|
836d0d7107 |
platform/x86/amd/hsmp: Add support for HSMP protocol version 7 messages
Following new HSMP messages are available on family 0x1A, model 0x00-0x1F platforms with protocol version 7. Add support for them in the driver. - SetXgmiPstateRange(26h) - CpuRailIsoFreqPolicy(27h) - DfcEnable(28h) - GetRaplUnit(30h) - GetRaplCoreCounter(31h) - GetRaplPackageCounter(32h) Also update HSMP message PwrEfficiencyModeSelection-21h. This message is updated to include GET option in recent firmware. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Link: https://lore.kernel.org/r/20241118102752.11703-1-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Linus Torvalds
|
9f16d5e6f2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
||
|
Linus Torvalds
|
fcb3ad4366 |
Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen: - alienware WMAX thermal interface support - Split ACPI and platform device based amd/hsmp drivers - AMD X3D frequency/cache mode switching support - asus thermal policy fixes - Disable C1 auto-demotion in suspend to allow entering the deepest C-states - Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - Replace intel_scu_ipc "workaround" with 32-bit IO - Correct *_show() function error handling in panasonic-laptop - Gemini Lake P2SB devfn correction - think-lmi Admin/System certificate authentication support - Disable WMI devices for shutdown, refactoring continues - Vexia EDU ATLA 10 tablet support - Surface Pro 9 5G (Arm/QCOM) support - Misc cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits) platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake platform/x86: panasonic-laptop: Return errno correctly in show callback Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02 alienware-wmi: create_thermal_profile() no longer brute-forces IDs alienware-wmi: Adds support to Alienware x17 R2 alienware-wmi: extends the list of supported models alienware-wmi: order alienware_quirks[] alphabetically platform/x86/intel/pmt: allow user offset for PMT callbacks platform/x86/amd/hsmp: Change the error type platform/x86/amd/hsmp: Add new error code and error logs platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused platform/x86: asus-wmi: Use platform_profile_cycle() platform/x86: asus-wmi: Fix inconsistent use of thermal policies platform/x86: hp: hp-bioscfg: remove redundant if statement MAINTAINERS: Update ISHTP ECLITE maintainer entry platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname() ... |
||
|
Linus Torvalds
|
c1f2ffe207 |
Merge tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
|
||
Arnd Bergmann
|
0d5e2d9b8f |
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
After the file got split, there are now W=1 warnings for users that
include it without referencing hsmp_msg_desc_table:
In file included from arch/x86/include/asm/amd_hsmp.h:6,
from drivers/platform/x86/amd/hsmp/plat.c:12:
arch/x86/include/uapi/asm/amd_hsmp.h:91:35: error: 'hsmp_msg_desc_table' defined but not used [-Werror=unused-const-variable=]
91 | static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
| ^~~~~~~~~~~~~~~~~~~
Mark it as __attribute__((maybe_unused)) to shut up the warning but
keep it in the file in case it is used from userland. The __maybe_unused
shorthand unfortunately isn't available in userspace, so this has to
be the long form.
While it is not envisioned a normal userspace program could benefit
from having this table as part of UAPI, it seems there is non-zero
chance this array is used by some userspace tests so it is retained for
now (see the Link below).
Fixes:
|
||
|
Sean Christopherson
|
dcb988cdac |
KVM: x86: Quirk initialization of feature MSRs to KVM's max configuration
Add a quirk to control KVM's misguided initialization of select feature MSRs to KVM's max configuration, as enabling features by default violates KVM's approach of letting userspace own the vCPU model, and is actively problematic for MSRs that are conditionally supported, as the vCPU will end up with an MSR value that userspace can't restore. E.g. if the vCPU is configured with PDCM=0, userspace will save and attempt to restore a non-zero PERF_CAPABILITIES, thanks to KVM's meddling. Link: https://lore.kernel.org/r/20240802185511.305849-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
Avadhut Naik
|
d4fca1358e |
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
Starting with Zen4, AMD's Scalable MCA systems incorporate two new registers: MCA_SYND1 and MCA_SYND2. These registers will include supplemental error information in addition to the existing MCA_SYND register. The data within these registers is considered valid if MCA_STATUS[SyndV] is set. Userspace error decoding tools like rasdaemon gather related hardware error information through the tracepoints. Therefore, export these two registers through the mce_record tracepoint so that tools like rasdaemon can parse them and output the supplemental error information like FRU text contained in them. [ bp: Massage. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Avadhut Naik <avadhut.naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20241022194158.110073-4-avadhut.naik@amd.com |
||
Mark Brown
|
3630e82ab6 |
mman: Add map_shadow_stack() flags
In preparation for adding arm64 GCS support make the map_shadow_stack() SHADOW_STACK_SET_TOKEN flag generic and add _SET_MARKER. The existing flag indicates that a token usable for stack switch should be added to the top of the newly mapped GCS region while the new flag indicates that a top of stack marker suitable for use by unwinders should be added above that. For arm64 the top of stack marker is all bits 0. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Yury Khrustalev <yury.khrustalev@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-5-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Linus Torvalds
|
3efc57369a |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
||
Yan Zhao
|
aa8d1f48d3 |
KVM: x86/mmu: Introduce a quirk to control memslot zap behavior
Introduce the quirk KVM_X86_QUIRK_SLOT_ZAP_ALL to allow users to select
KVM's behavior when a memslot is moved or deleted for KVM_X86_DEFAULT_VM
VMs. Make sure KVM behave as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs.
The KVM_X86_QUIRK_SLOT_ZAP_ALL quirk offers two behavior options:
- when enabled: Invalidate/zap all SPTEs ("zap-all"),
- when disabled: Precisely zap only the leaf SPTEs within the range of the
moving/deleting memory slot ("zap-slot-leafs-only").
"zap-all" is today's KVM behavior to work around a bug [1] where the
changing the zapping behavior of memslot move/deletion would cause VM
instability for VMs with an Nvidia GPU assigned; while
"zap-slot-leafs-only" allows for more precise zapping of SPTEs within the
memory slot range, improving performance in certain scenarios [2], and
meeting the functional requirements for TDX.
Previous attempts to select "zap-slot-leafs-only" include a per-VM
capability approach [3] (which was not preferred because the root cause of
the bug remained unidentified) and a per-memslot flag approach [4]. Sean
and Paolo finally recommended the implementation of this quirk and
explained that it's the least bad option [5].
By default, the quirk is enabled on KVM_X86_DEFAULT_VM VMs to use
"zap-all". Users have the option to disable the quirk to select
"zap-slot-leafs-only" for specific KVM_X86_DEFAULT_VM VMs that are
unaffected by this bug.
For non-KVM_X86_DEFAULT_VM VMs, the "zap-slot-leafs-only" behavior is
always selected without user's opt-in, regardless of if the user opts for
"zap-all".
This is because it is assumed until proven otherwise that non-
KVM_X86_DEFAULT_VM VMs will not be exposed to the bug [1], and most
importantly, it's because TDX must have "zap-slot-leafs-only" always
selected. In TDX's case a memslot's GPA range can be a mixture of "private"
or "shared" memory. Shared is roughly analogous to how EPT is handled for
normal VMs, but private GPAs need lots of special treatment:
1) "zap-all" would require to zap private root page or non-leaf entries or
at least leaf-entries beyond the deleting memslot scope. However, TDX
demands that the root page of the private page table remains unchanged,
with leaf entries being zapped before non-leaf entries, and any dropped
private guest pages must be re-accepted by the guest.
2) if "zap-all" zaps only shared page tables, it would result in private
pages still being mapped when the memslot is gone. This may affect even
other processes if later the gmem fd was whole punched, causing the
pages being freed on the host while still mapped in the TD, because
there's no pgoff to the gfn information to zap the private page table
after memslot is gone.
So, simply go "zap-slot-leafs-only" as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs to avoid manual opt-in for every VM type [6] or
complicating quirk disabling interface (current quirk disabling interface
is limited, no way to query quirks, or force them to be disabled).
Add a new function kvm_mmu_zap_memslot_leafs() to implement
"zap-slot-leafs-only". This function does not call kvm_unmap_gfn_range(),
bypassing special handling to APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, as
1) The APIC_ACCESS_PAGE_PRIVATE_MEMSLOT cannot be created by users, nor can
it be moved. It is only deleted by KVM when APICv is permanently
inhibited.
2) kvm_vcpu_reload_apic_access_page() effectively does nothing when
APIC_ACCESS_PAGE_PRIVATE_MEMSLOT is deleted.
3) Avoid making all cpus request of KVM_REQ_APIC_PAGE_RELOAD can save on
costly IPIs.
Suggested-by: Kai Huang <kai.huang@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com [1]
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com/#25054908 [2]
Link: https://lore.kernel.org/kvm/20200713190649.GE29725@linux.intel.com/T/#mabc0119583dacf621025e9d873c85f4fbaa66d5c [3]
Link: https://lore.kernel.org/all/20240515005952.3410568-3-rick.p.edgecombe@intel.com [4]
Link: https://lore.kernel.org/all/7df9032d-83e4-46a1-ab29-6c7973a2ab0b@redhat.com [5]
Link: https://lore.kernel.org/all/ZnGa550k46ow2N3L@google.com [6]
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021043.13881-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
Vignesh Balasubramanian
|
ba386777a3 |
x86/elf: Add a new FPU buffer layout info to x86 core files
Add a new .note section containing type, size, offset and flags of every xfeature that is present. This information will be used by debuggers to understand the XSAVE layout of the machine where the core file has been dumped, and to read XSAVE registers, especially during cross-platform debugging. The XSAVE layouts of modern AMD and Intel CPUs differ, especially since Memory Protection Keys and the AVX-512 features have been inculcated into the AMD CPUs. Since AMD never adopted (and hence never left room in the XSAVE layout for) the Intel MPX feature, tools like GDB had assumed a fixed XSAVE layout matching that of Intel (based on the XCR0 mask). Hence, core dumps from AMD CPUs didn't match the known size for the XCR0 mask. This resulted in GDB and other tools not being able to access the values of the AVX-512 and PKRU registers on AMD CPUs. To solve this, an interim solution has been accepted into GDB, and is already a part of GDB 14, see https://sourceware.org/pipermail/gdb-patches/2023-March/198081.html. But it depends on heuristics based on the total XSAVE register set size and the XCR0 mask to infer the layouts of the various register blocks for core dumps, and hence, is not a foolproof mechanism to determine the layout of the XSAVE area. Therefore, add a new core dump note in order to allow GDB/LLDB and other relevant tools to determine the layout of the XSAVE area of the machine where the corefile was dumped. The new core dump note (which is being proposed as a per-process .note section), NT_X86_XSAVE_LAYOUT (0x205) contains an array of structures. Each structure describes an individual extended feature containing offset, size and flags in this format: struct x86_xfeat_component { u32 type; u32 size; u32 offset; u32 flags; }; and in an independent manner, allowing for future extensions without depending on hw arch specifics like CPUID etc. [ bp: Massage commit message, zap trailing whitespace. ] Co-developed-by: Jini Susan George <jinisusan.george@amd.com> Signed-off-by: Jini Susan George <jinisusan.george@amd.com> Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Vignesh Balasubramanian <vigbalas@amd.com> Link: https://lore.kernel.org/r/20240725161017.112111-2-vigbalas@amd.com |
||
|
Linus Torvalds
|
2c9b351240 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit
|
||
|
Paolo Bonzini
|
5dcc1e7614 |
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11 - Add a global struct to consolidate tracking of host values, e.g. EFER, and move "shadow_phys_bits" into the structure as "maxphyaddr". - Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. - Print the name of the APICv/AVIC inhibits in the relevant tracepoint. - Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. - Misc cleanups |
||
Thomas Prescher
|
85542adb65 |
KVM: x86: Add KVM_RUN_X86_GUEST_MODE kvm_run flag
When a vCPU is interrupted by a signal while running a nested guest, KVM will exit to userspace with L2 state. However, userspace has no way to know whether it sees L1 or L2 state (besides calling KVM_GET_STATS_FD, which does not have a stable ABI). This causes multiple problems: The simplest one is L2 state corruption when userspace marks the sregs as dirty. See this mailing list thread [1] for a complete discussion. Another problem is that if userspace decides to continue by emulating instructions, it will unknowingly emulate with L2 state as if L1 doesn't exist, which can be considered a weird guest escape. Introduce a new flag, KVM_RUN_X86_GUEST_MODE, in the kvm_run data structure, which is set when the vCPU exited while running a nested guest. Also introduce a new capability, KVM_CAP_X86_GUEST_MODE, to advertise the functionality to userspace. [1] https://lore.kernel.org/kvm/20240416123558.212040-1-julian.stecklina@cyberus-technology.de/T/#m280aadcb2e10ae02c191a7dc4ed4b711a74b1f55 Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de> Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de> Link: https://lore.kernel.org/r/20240508132502.184428-1-julian.stecklina@cyberus-technology.de Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
Tom Lendacky
|
34ff659017 |
x86/sev: Use kernel provided SVSM Calling Areas
The SVSM Calling Area (CA) is used to communicate between Linux and the SVSM. Since the firmware supplied CA for the BSP is likely to be in reserved memory, switch off that CA to a kernel provided CA so that access and use of the CA is available during boot. The CA switch is done using the SVSM core protocol SVSM_CORE_REMAP_CA call. An SVSM call is executed by filling out the SVSM CA and setting the proper register state as documented by the SVSM protocol. The SVSM is invoked by by requesting the hypervisor to run VMPL0. Once it is safe to allocate/reserve memory, allocate a CA for each CPU. After allocating the new CAs, the BSP will switch from the boot CA to the per-CPU CA. The CA for an AP is identified to the SVSM when creating the VMSA in preparation for booting the AP. [ bp: Heavily simplify svsm_issue_call() asm, other touchups. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/fa8021130bcc3bcf14d722a25548cb0cdf325456.1717600736.git.thomas.lendacky@amd.com |
||
Brijesh Singh
|
ad27ce1555 |
KVM: SEV: Add KVM_SEV_SNP_LAUNCH_FINISH command
Add a KVM_SEV_SNP_LAUNCH_FINISH command to finalize the cryptographic launch digest which stores the measurement of the guest at launch time. Also extend the existing SNP firmware data structures to support disabling the use of Versioned Chip Endorsement Keys (VCEK) by guests as part of this command. While finalizing the launch flow, the code also issues the LAUNCH_UPDATE SNP firmware commands to encrypt/measure the initial VMSA pages for each configured vCPU, which requires setting the RMP entries for those pages to private, so also add handling to clean up the RMP entries for these pages whening freeing vCPUs during shutdown. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Harald Hoyer <harald@profian.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <20240501085210.2213060-8-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Brijesh Singh
|
dee5a47cc7 |
KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command
A key aspect of a launching an SNP guest is initializing it with a known/measured payload which is then encrypted into guest memory as pre-validated private pages and then measured into the cryptographic launch context created with KVM_SEV_SNP_LAUNCH_START so that the guest can attest itself after booting. Since all private pages are provided by guest_memfd, make use of the kvm_gmem_populate() interface to handle this. The general flow is that guest_memfd will handle allocating the pages associated with the GPA ranges being initialized by each particular call of KVM_SEV_SNP_LAUNCH_UPDATE, copying data from userspace into those pages, and then the post_populate callback will do the work of setting the RMP entries for these pages to private and issuing the SNP firmware calls to encrypt/measure them. For more information see the SEV-SNP specification. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <20240501085210.2213060-7-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Brijesh Singh
|
136d8bc931 |
KVM: SEV: Add KVM_SEV_SNP_LAUNCH_START command
KVM_SEV_SNP_LAUNCH_START begins the launch process for an SEV-SNP guest. The command initializes a cryptographic digest context used to construct the measurement of the guest. Other commands can then at that point be used to load/encrypt data into the guest's initial launch image. For more information see the SEV-SNP specification. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <20240501085210.2213060-6-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Brijesh Singh
|
1dfe571c12 |
KVM: SEV: Add initial SEV-SNP support
SEV-SNP builds upon existing SEV and SEV-ES functionality while adding new hardware-based security protection. SEV-SNP adds strong memory encryption and integrity protection to help prevent malicious hypervisor-based attacks such as data replay, memory re-mapping, and more, to create an isolated execution environment. Define a new KVM_X86_SNP_VM type which makes use of these capabilities and extend the KVM_SEV_INIT2 ioctl to support it. Also add a basic helper to check whether SNP is enabled and set PFERR_PRIVATE_ACCESS for private #NPFs so they are handled appropriately by KVM MMU. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240501085210.2213060-5-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Michael Roth
|
4af663c2f6 |
KVM: SEV: Allow per-guest configuration of GHCB protocol version
The GHCB protocol version may be different from one guest to the next. Add a field to track it for each KVM instance and extend KVM_SEV_INIT2 to allow it to be configured by userspace. Now that all SEV-ES support for GHCB protocol version 2 is in place, go ahead and default to it when creating SEV-ES guests through the new KVM_SEV_INIT2 interface. Keep the older KVM_SEV_ES_INIT interface restricted to GHCB protocol version 1. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Message-ID: <20240501071048.2208265-5-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
4f5defae70 |
KVM: SEV: introduce KVM_SEV_INIT2 operation
The idea that no parameter would ever be necessary when enabling SEV or SEV-ES for a VM was decidedly optimistic. In fact, in some sense it's already a parameter whether SEV or SEV-ES is desired. Another possible source of variability is the desired set of VMSA features, as that affects the measurement of the VM's initial state and cannot be changed arbitrarily by the hypervisor. Create a new sub-operation for KVM_MEMORY_ENCRYPT_OP that can take a struct, and put the new op to work by including the VMSA features as a field of the struct. The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of supported VMSA features for backwards compatibility. The struct also includes the usual bells and whistles for future extensibility: a flags field that must be zero for now, and some padding at the end. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240404121327.3107131-13-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
26c44aa9e0 |
KVM: SEV: define VM types for SEV and SEV-ES
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240404121327.3107131-11-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
ac5c48027b |
KVM: SEV: publish supported VMSA features
Compute the set of features to be stored in the VMSA when KVM is initialized; move it from there into kvm_sev_info when SEV is initialized, and then into the initial VMSA. The new variable can then be used to return the set of supported features to userspace, via the KVM_GET_DEVICE_ATTR ioctl. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-ID: <20240404121327.3107131-6-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
f3c80061c0 |
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
The data structs for KVM_MEMORY_ENCRYPT_OP have different sizes for 32- and 64-bit userspace, but they do not make any attempt to convert from one ABI to the other when 32-bit userspace is running on 64-bit kernels. This configuration never worked, and SEV is only for 64-bit kernels so we're not breaking ABI on 32-bit kernels. Fix this by adding the appropriate padding; no functional change intended for 64-bit userspace. Reviewed-by: Michael Roth <michael.roth@amd.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
c822a075ab |
Merge tag 'kvm-x86-asyncpf_abi-6.9' of https://github.com/kvm-x86/linux into HEAD
Guest-side KVM async #PF ABI cleanup for 6.9 Delete kvm_vcpu_pv_apf_data.enabled to fix a goof in KVM's async #PF ABI where the enabled field pushes the size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes, i.e. beyond a single cache line. The enabled field is purely a guest-side flag that Linux-as-a-guest uses to track whether or not the guest has enabled async #PF support. The actual flag that is passed to the host, i.e. to KVM proper, is a single bit in a synthetic MSR, MSR_KVM_ASYNC_PF_EN, i.e. is in a location completely unrelated to the shared kvm_vcpu_pv_apf_data structure. Simply drop the the field and use a dedicated guest-side per-CPU variable to fix the ABI, as opposed to fixing the documentation to match reality. KVM has never consumed kvm_vcpu_pv_apf_data.enabled, so the odds of the ABI change breaking anything are extremely low. |
||
|
Linus Torvalds
|
4f712ee0cb |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
Ingo Molnar
|
2e2bc42c83 |
Merge branch 'linus' into x86/boot, to resolve conflict
There's a new conflict with Linus's upstream tree, because in the following merge conflict resolution in <asm/coco.h>: |
||
|
Linus Torvalds
|
d69ad12c78 |
Merge tag 'x86-build-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar: - Reduce <asm/bootparam.h> dependencies - Simplify <asm/efi.h> - Unify *_setup_data definitions into <asm/setup_data.h> - Reduce the size of <asm/bootparam.h> * tag 'x86-build-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Do not include <asm/bootparam.h> in several files x86/efi: Implement arch_ima_efi_boot_mode() in source file x86/setup: Move internal setup_data structures into setup_data.h x86/setup: Move UAPI setup structures into setup_data.h |
||
Ard Biesheuvel
|
cd0d9d92c8 |
x86/boot: Move mem_encrypt= parsing to the decompressor
The early SME/SEV code parses the command line very early, in order to decide whether or not memory encryption should be enabled, which needs to occur even before the initial page tables are created. This is problematic for a number of reasons: - this early code runs from the 1:1 mapping provided by the decompressor or firmware, which uses a different translation than the one assumed by the linker, and so the code needs to be built in a special way; - parsing external input while the entire kernel image is still mapped writable is a bad idea in general, and really does not belong in security minded code; - the current code ignores the built-in command line entirely (although this appears to be the case for the entire decompressor) Given that the decompressor/EFI stub is an intrinsic part of the x86 bootable kernel image, move the command line parsing there and out of the core kernel. This removes the need to build lib/cmdline.o in a special way, or to use RIP-relative LEA instructions in inline asm blocks. This involves a new xloadflag in the setup header to indicate that mem_encrypt=on appeared on the kernel command line. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20240227151907.387873-17-ardb+git@google.com |
||
Paul Durrant
|
3991f35805 |
KVM: x86/xen: allow vcpu_info to be mapped by fixed HVA
If the guest does not explicitly set the GPA of vcpu_info structure in memory then, for guests with 32 vCPUs or fewer, the vcpu_info embedded in the shared_info page may be used. As described in a previous commit, the shared_info page is an overlay at a fixed HVA within the VMM, so in this case it also more optimal to activate the vcpu_info cache with a fixed HVA to avoid unnecessary invalidation if the guest memory layout is modified. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20240215152916.1158-14-paul@xen.org [sean: use kvm_gpc_is_{gpa,hva}_active()] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paul Durrant
|
b9220d3279 |
KVM: x86/xen: allow shared_info to be mapped by fixed HVA
The shared_info page is not guest memory as such. It is a dedicated page allocated by the VMM and overlaid onto guest memory in a GFN chosen by the guest and specified in the XENMEM_add_to_physmap hypercall. The guest may even request that shared_info be moved from one GFN to another by re-issuing that hypercall, but the HVA is never going to change. Because the shared_info page is an overlay the memory slots need to be updated in response to the hypercall. However, memory slot adjustment is not atomic and, whilst all vCPUs are paused, there is still the possibility that events may be delivered (which requires the shared_info page to be updated) whilst the shared_info GPA is absent. The HVA is never absent though, so it makes much more sense to use that as the basis for the kernel's mapping. Hence add a new KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA attribute type for this purpose and a KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag to advertize its availability. Don't actually advertize it yet though. That will be done in a subsequent patch, which will also add tests for the new attribute type. Also update the KVM API documentation with the new attribute and also fix it up to consistently refer to 'shared_info' (with the underscore). Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20240215152916.1158-13-paul@xen.org [sean: store "hva" as a user pointer, use kvm_gpc_is_{gpa,hva}_active()] Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Paolo Bonzini
|
6bda055d62 |
KVM: define __KVM_HAVE_GUEST_DEBUG unconditionally
Since all architectures (for historical reasons) have to define struct kvm_guest_debug_arch, and since userspace has to check KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is no advantage in masking the capability #define itself. Remove the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific headers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
8886640dad |
kvm: replace __KVM_HAVE_READONLY_MEM with Kconfig symbol
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly return nonzero. This however does not make sense, and it prevented userspace from supporting this architecture-independent feature without recompilation. Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and is only used in virt/kvm/kvm_main.c. Userspace does not need to test it and there should be no need for it to exist. Remove it and replace it with a Kconfig symbol within Linux source code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
bcac047727 |
KVM: x86: move x86-specific structs to uapi/asm/kvm.h
Several capabilities that exist only on x86 nevertheless have their structs defined in include/uapi/linux/kvm.h. Move them to arch/x86/include/uapi/asm/kvm.h for cleanliness. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
458822416a |
kvm: x86: use a uapi-friendly macro for GENMASK
Change uapi header uses of GENMASK to instead use the uapi/linux/bits.h bit macros, since GENMASK is not defined in uapi headers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Dionna Glaze
|
882dd4aee3 |
kvm: x86: use a uapi-friendly macro for BIT
Change uapi header uses of BIT to instead use the uapi/linux/const.h bit macros, since BIT is not defined in uapi headers. The PMU mask uses _BITUL since it targets a 32 bit flag field, whereas the longmode definition is meant for a 64 bit flag field. Cc: Sean Christophersen <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Message-Id: <20231207001142.3617856-1-dionnaglaze@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Xiaoyao Li
|
ccb2280ec2 |
x86/kvm: Use separate percpu variable to track the enabling of asyncpf
Refer to commit |
||
H. Peter Anvin (Intel)
|
ff45746fbf |
x86/cpu: Add X86_CR4_FRED macro
Add X86_CR4_FRED macro for the FRED bit in %cr4. This bit must not be changed after initialization, so add it to the pinned CR4 bits. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li <xin3.li@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Shan Kang <shan.kang@intel.com> Link: https://lore.kernel.org/r/20231205105030.8698-12-xin3.li@intel.com |
||
Thomas Zimmermann
|
efd7def004 |
x86/setup: Move UAPI setup structures into setup_data.h
The type definition of struct pci_setup_rom in <asm/pci.h> requires struct setup_data from <asm/bootparam.h>. Many drivers include <linux/pci.h>, but do not use boot parameters. Changes to bootparam.h or its included header files could easily trigger a large, unnecessary rebuild of the kernel. Moving struct setup_data and related code into its own header file avoids including <asm/bootparam.h> in <asm/pci.h>. Instead include the new header <asm/screen_data.h> and remove the include statement for x86_init.h, which is unnecessary but pulls in bootparams.h. Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20240112095000.8952-2-tzimmermann@suse.de |
||
|
Linus Torvalds
|
09d1c6a80f |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
|
Linus Torvalds
|
78273df7f6 |
Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ... |
||
Bjorn Helgaas
|
54aa699e80 |
arch/x86: Fix typos
Fix typos, most reported by "codespell arch/x86". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org |
||
Kent Overstreet
|
3447066982 |
x86/signal: kill dependency on time.h
this is unecessary, and was pulling in printk.h from uapi headers Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |