Since
741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
a helper rdt_kn_name() that checks that rdtgroup_mutex is held has been used
for all accesses to the kernfs node name.
rdtgroup_mkdir() uses the name to determine if a valid monitor group is being
created by checking the parent name is "mon_groups". This is done without
holding rdtgroup_mutex, and now triggers the following warning:
| WARNING: suspicious RCU usage
| 6.15.0-rc1 #4465 Tainted: G E
| -----------------------------
| arch/x86/kernel/cpu/resctrl/internal.h:408 suspicious rcu_dereference_check() usage!
[...]
| Call Trace:
| <TASK>
| dump_stack_lvl
| lockdep_rcu_suspicious.cold
| is_mon_groups
| rdtgroup_mkdir
| kernfs_iop_mkdir
| vfs_mkdir
| do_mkdirat
| __x64_sys_mkdir
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
Creating a control or monitor group calls mkdir_rdt_prepare(), which uses
rdtgroup_kn_lock_live() to take the rdtgroup_mutex.
To avoid taking and dropping the lock, move the check for the monitor group
name and position into mkdir_rdt_prepare() so that it occurs under
rdtgroup_mutex. Hoist is_mon_groups() earlier in the file.
[ bp: Massage. ]
Fixes: 741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250407124637.2433230-1-james.morse@arm.com
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
resctrl_file_fflags_init() is called from the architecture specific code to
make the 'thread_throttle_mode' file visible. The architecture specific code
has already set the membw.throttle_mode in the rdt_resource.
This forces the RFTYPE flags used by resctrl to be exposed to the architecture
specific code.
This doesn't need to be specific to the architecture, the throttle_mode can be
used by resctrl to determine if the 'thread_throttle_mode' file should be
visible. This allows the RFTYPE flags to be private to resctrl.
Add thread_throttle_mode_init(), and use it to call resctrl_file_fflags_init()
from resctrl_init(). This avoids publishing an extra function between the
architecture and filesystem code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-28-james.morse@arm.com
Pseudo-lock relies on knowledge of the micro-architecture to disable
prefetchers etc.
On arm64 these controls are typically secure only, meaning Linux can't access
them. Arm's cache-lockdown feature works in a very different way. Resctrl's
pseudo-lock isn't going to be used on arm64 platforms.
Add a Kconfig symbol that can be selected by the architecture. This enables or
disables building of the pseudo_lock.c file, and replaces the functions with
stubs. An additional IS_ENABLED() check is needed in rdtgroup_mode_write() so
that attempting to enable pseudo-lock reports an "Unknown or unsupported mode"
to user-space via the last_cmd_status file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-25-james.morse@arm.com
mba_mbps_default_event is initialised based on whether mbm_local or mbm_total
is supported. In the case of both, it is initialised to mbm_local.
mba_mbps_default_event is initialised in core.c's get_rdt_mon_resources(),
while all the readers are in rdtgroup.c.
After this code is split into architecture-specific and filesystem code,
get_rdt_mon_resources() remains part of the architecture code, which would
mean mba_mbps_default_event has to be exposed by the filesystem code.
Move the initialisation to the filesystem's resctrl_mon_resource_init().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-22-james.morse@arm.com
When BMEC is supported the resctrl event can be configured in a number of
ways. This depends on architecture support. rdt_get_mon_l3_config() modifies
the struct mon_evt and calls resctrl_file_fflags_init() to create the files
that allow the configuration.
Splitting this into separate architecture and filesystem parts would require
the struct mon_evt and resctrl_file_fflags_init() to be exposed.
Instead, add resctrl_arch_is_evt_configurable(), and use this from
resctrl_mon_resource_init() to initialise struct mon_evt and call
resctrl_file_fflags_init().
resctrl_arch_is_evt_configurable() calls rdt_cpu_has() so it doesn't obviously
benefit from being inlined. Putting it in core.c will allow rdt_cpu_has() to
eventually become static.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-20-james.morse@arm.com
The architecture specific parts of resctrl provide helpers like
is_mbm_total_enabled() and is_mbm_local_enabled() to hide accesses to the
rdt_mon_features bitmap.
Exposing a group of helpers between the architecture and filesystem code is
preferable to a single unsigned-long like rdt_mon_features. Helpers can be more
readable and have a well defined behaviour, while allowing architectures to hide
more complex behaviour.
Once the filesystem parts of resctrl are moved, these existing helpers can no
longer live in internal.h. Move them to include/linux/resctrl.h Once these are
exposed to the wider kernel, they should have a 'resctrl_arch_' prefix, to fit
the rest of the arch<->fs interface.
Move and rename the helpers that touch rdt_mon_features directly. is_mbm_event()
and is_mbm_enabled() are only called from rdtgroup.c, so can be moved into that
file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-19-james.morse@arm.com
The for_each_*_rdt_resource() helpers walk the architecture's array of
structures, using the resctrl visible part as an iterator. These became
over-complex when the structures were split into a filesystem and
architecture-specific struct. This approach avoided the need to touch every
call site, and was done before there was a helper to retrieve a resource by
rid.
Once the filesystem parts of resctrl are moved to /fs/, both the arch's
resource array, and the definition of those structures is no longer
accessible. To support resctrl, each architecture would have to provide
equally complex macros.
Rewrite the macro to make use of resctrl_arch_get_resource(), and move these
to include/linux/resctrl.h so existing x86 arch code continues to use them.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-18-james.morse@arm.com
When resctrl is fully factored into core and per-arch code, each arch will
need to use some resctrl common definitions in order to define its own
specializations and helpers. Following conventional practice, it would be
desirable to put the dependent arch definitions in an <asm/resctrl.h> header
that is included by the common <linux/resctrl.h> header. However, this can
make it awkward to avoid a circular dependency between <linux/resctrl.h> and
the arch header.
To avoid such dependencies, move the affected common types and constants into
a new header that does not need to depend on <linux/resctrl.h> or on the arch
headers.
The same logic applies to the monitor-configuration defines, move these too.
Some kind of enumeration for events is needed between the filesystem and
architecture code. Take the x86 definition as its convenient for x86.
The definition of enum resctrl_event_id is needed to allow the architecture
code to define resctrl_arch_mon_ctx_alloc() and resctrl_arch_mon_ctx_free().
The definition of enum resctrl_res_level is needed to allow the architecture
code to define resctrl_arch_set_cdp_enabled() and
resctrl_arch_get_cdp_enabled().
The bits for mbm_local_bytes_config et al are ABI, and must be the same on all
architectures. These are documented in Documentation/arch/x86/resctrl.rst
The maintainers entry for these headers was missed when resctrl.h was created.
Add a wildcard entry to match both resctrl.h and resctrl_types.h.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-14-james.morse@arm.com
rdt_find_domain() finds a domain given a resource and a cache-id. This is
used by both the architecture code and the filesystem code.
After the filesystem code moves to live in /fs/, this helper is either
duplicated by all architectures, or needs exposing by the filesystem code.
Add the declaration to the global header file. As it's now globally visible,
and has only a handful of callers, swap the 'rdt' for 'resctrl'. Move the
function to live with its caller in ctrlmondata.c as the filesystem code will
not have anything corresponding to core.c.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-13-james.morse@arm.com
rdtgroup_rmdir_ctrl() and rdtgroup_rmdir_mon() set the per-CPU pqr_state for
CPUs that were part of the rmdir()'d group.
Another architecture might not have a 'pqr_state', its hardware may need the
values in a different format. MPAM's equivalent of RMID values are not unique,
and always need the CLOSID to be provided too.
There is only one caller that modifies a single value, (rdtgroup_rmdir_mon()).
MPAM always needs both CLOSID and RMID for the hardware value as these are
written to the same system register.
As rdtgroup_rmdir_mon() has the CLOSID on hand, only provide a helper to set
both values. These values are read by __resctrl_sched_in(), but may be written
by a different CPU without any locking, add READ/WRTE_ONCE() to avoid torn
values.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-10-james.morse@arm.com
__rdt_get_mem_config_amd() and __get_mem_config_intel() both use the
default_ctrl property as a maximum value. This is because the MBA schema works
differently between these platforms. Doing this complicates determining
whether the default_ctrl property belongs to the arch code, or can be derived
from the schema format.
Deriving the maximum or default value from the schema format would avoid the
architecture code having to tell resctrl such obvious things as the maximum
percentage is 100, and the maximum bitmap is all ones.
Maximum bandwidth is always going to vary per platform. Add max_bw as
a special case. This is currently used for the maximum MBA percentage on Intel
platforms, but can be removed from the architecture code if 'percentage'
becomes a schema format resctrl supports directly.
This value isn't needed for other schema formats.
This will allow the default_ctrl to be generated from the schema properties
when it is needed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-8-james.morse@arm.com
The resctrl architecture code provides a data_width for the controls of each
resource. This is used to zero pad all control values in the schemata file so
they appear in columns. The same is done with the resource names to complete
the visual effect. e.g.
| SMBA:0=2048
| L3:0=00ff
AMD platforms discover their maximum bandwidth for the MB resource from
firmware, but hard-code the data_width to 4. If the maximum bandwidth requires
more digits - the tabular format is silently broken. This is also broken when
the mba_MBps mount option is used as the field width isn't updated. If new
schema are added resctrl will need to be able to determine the maximum width.
The benefit of this pretty-printing is questionable.
Instead of handling runtime discovery of the data_width for AMD platforms,
remove the feature. These fields are always zero padded so should be harmless
to remove if the whole field has been treated as a number. In the above
example, this would now look like this:
| SMBA:0=2048
| L3:0=ff
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-7-james.morse@arm.com
Resctrl occasionally wants to know something about a specific resource, in
these cases it reaches into the arch code's rdt_resources_all[] array.
Once the filesystem parts of resctrl are moved to /fs/, this means it will
need visibility of the architecture specific struct rdt_hw_resource
definition, and the array of all resources. All architectures would also need
a r_resctrl member in this struct.
Instead, abstract this via a helper to allow architectures to do different
things here. Move the level enum to the resctrl header and add a helper to
retrieve the struct rdt_resource by 'rid'.
resctrl_arch_get_resource() should not return NULL for any value in the enum,
it may instead return a dummy resource that is !alloc_enabled && !mon_enabled.
Co-developed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-3-james.morse@arm.com
Commit
6eac36bb9e ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
added logic that causes resctrl to search for the CLOSID with the fewest dirty
cache lines when creating a new control group, if requested by the arch code.
This depends on the values read from the llc_occupancy counters. The logic is
applicable to architectures where the CLOSID effectively forms part of the
monitoring identifier and so do not allow complete freedom to choose an unused
monitoring identifier for a given CLOSID.
This support missed that some platforms may not have these counters. This
causes a NULL pointer dereference when creating a new control group as the
array was not allocated by dom_data_init().
As this feature isn't necessary on platforms that don't have cache occupancy
monitors, add this to the check that occurs when a new control group is
allocated.
Fixes: 6eac36bb9e ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com> # arm64
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20250311183715.16445-2-james.morse@arm.com
Using RCU lifetime rules to access kernfs_node::name can avoid the
trouble with kernfs_rename_lock in kernfs_name() and kernfs_path_from_node()
if the fs was created with KERNFS_ROOT_INVARIANT_PARENT. This is usefull
as it allows to implement kernfs_path_from_node() only with RCU
protection and avoiding kernfs_rename_lock. The lock is only required if
the __parent node can be changed and the function requires an unchanged
hierarchy while it iterates from the node to its parent.
The change is needed to allow the lookup of the node's path
(kernfs_path_from_node()) from context which runs always with disabled
preemption and or interrutps even on PREEMPT_RT. The problem is that
kernfs_rename_lock becomes a sleeping lock on PREEMPT_RT.
I went through all ::name users and added the required access for the lookup
with a few extensions:
- rdtgroup_pseudo_lock_create() drops all locks and then uses the name
later on. resctrl supports rename with different parents. Here I made
a temporal copy of the name while it is used outside of the lock.
- kernfs_rename_ns() accepts NULL as new_parent. This simplifies
sysfs_move_dir_ns() where it can set NULL in order to reuse the current
name.
- kernfs_rename_ns() is only using kernfs_rename_lock if the parents are
different. All users use either kernfs_rwsem (for stable path view) or
just RCU for the lookup. The ::name uses always RCU free.
Use RCU lifetime guarantees to access kernfs_node::name.
Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot+6ea37e2e6ffccf41a7e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67251dc6.050a0220.529b6.015e.GAE@google.com/
Reported-by: Hillf Danton <hdanton@sina.com>
Closes: https://lore.kernel.org/20241102001224.2789-1-hdanton@sina.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-7-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
The "mba_MBps" mount option provides an alternate method to control memory
bandwidth. Instead of specifying allowable bandwidth as a percentage of
maximum possible, the user provides a MiB/s limit value.
There is a file in each CTRL_MON group directory that shows the event
currently in use.
Allow writing that file to choose a different event.
A user can choose any of the memory bandwidth monitoring events listed in
/sys/fs/resctrl/info/L3_mon/mon_features independently for each CTRL_MON group
by writing to each of the "mba_MBps_event" files.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-8-tony.luck@intel.com
The "mba_MBps" mount option provides an alternate method to control memory
bandwidth. Instead of specifying allowable bandwidth as a percentage of
maximum possible, the user provides a MiB/s limit value.
In preparation to allow the user to pick the memory bandwidth monitoring event
used as input to the feedback loop, provide a file in each CTRL_MON group
directory that shows the event currently in use. Note that this file is only
visible when the "mba_MBps" mount option is in use.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-7-tony.luck@intel.com
The default input measurement to the mba_sc feedback loop for memory bandwidth
control when the user mounts with the "mba_MBps" option is the local bandwidth
event. But some systems may not support a local bandwidth event.
When local bandwidth event is not supported, check for support of total
bandwidth and use that instead.
Relax the mount option check to allow use of the "mba_MBps" option for systems
when only total bandwidth monitoring is supported. Also update the error
message.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-6-tony.luck@intel.com
Switching between local and total memory bandwidth events as the input
to the mba_sc feedback loop would be cumbersome and take effect slowly
in the current implementation as the bandwidth is only known after two
consecutive readings of the same event.
Compute the bandwidth for all supported events. This doesn't add
significant overhead and will make changing which event is used
simple.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-5-tony.luck@intel.com
update_mba_bw() hard codes use of the memory bandwidth local event which
prevents more flexible options from being deployed.
Change this function to use the event specified in the rdtgroup that is
being processed.
Mount time checks for the "mba_MBps" option ensure that local memory
bandwidth is enabled. So drop the redundant is_mbm_local_enabled() check.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-4-tony.luck@intel.com
Resctrl uses local memory bandwidth event as input to the feedback loop when
the mba_MBps mount option is used. This means that this mount option cannot be
used on systems that only support monitoring of total bandwidth.
Prepare to allow users to choose the input event independently for each
CTRL_MON group by adding a global variable "mba_mbps_default_event" used to
set the default event for each CTRL_MON group, and a new field
"mba_mbps_event" in struct rdtgroup to track which event is used for each
CTRL_MON group.
Notes:
1) Both of these are only used when the user mounts the filesystem with the
"mba_MBps" option.
2) Only check for support of local bandwidth event when initializing
mba_mbps_default_event. Support for total bandwidth event can be added
after other routines in resctrl have been updated to handle total bandwidth
event.
[ bp: Move mba_mbps_default_event extern into the arch header. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20241206163148.83828-3-tony.luck@intel.com
thread_throttle_mode_init() and mbm_config_rftype_init() both initialize
fflags for resctrl files.
Adding new files will involve adding another function to initialize
the fflags. This can be simplified by adding a new function
resctrl_file_fflags_init() and passing the file name and flags
to be initialized.
Consolidate fflags initialization into resctrl_file_fflags_init() and
remove thread_throttle_mode_init() and mbm_config_rftype_init().
[ Tony: Drop __init attribute so resctrl_file_fflags_init() can be used at
run time. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20241206163148.83828-2-tony.luck@intel.com
Pull x86 cache resource control updates from Borislav Petkov:
- Add support for 6-node sub-NUMA clustering on Intel
- Cleanup
* tag 'x86_cache_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Support Sub-NUMA cluster mode SNC6
x86/resctrl: Slightly clean-up mbm_config_show()
'mon_info' is already zeroed in the list_for_each_entry() loop below. There
is no need to explicitly initialize it here. It just wastes some space and
cycles.
Remove this un-needed code.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
74967 5103 1880 81950 1401e arch/x86/kernel/cpu/resctrl/rdtgroup.o
After:
=====
text data bss dec hex filename
74903 5103 1880 81886 13fde arch/x86/kernel/cpu/resctrl/rdtgroup.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/b2ebc809c8b6c6440d17b12ccf7c2d29aaafd488.1720868538.git.christophe.jaillet@wanadoo.fr
After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: \
__get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)
Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
Fixes: 05b93417ce ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@kernel.org>
Link: 6b11573b8c [1]
Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org
The resctrl schemata file supports specifying memory bandwidth associated with
the Memory Bandwidth Allocation (MBA) feature via a percentage (this is the
default) or bandwidth in MiBps (when resctrl is mounted with the "mba_MBps"
option).
The allowed range for the bandwidth percentage is from
/sys/fs/resctrl/info/MB/min_bandwidth to 100, using a granularity of
/sys/fs/resctrl/info/MB/bandwidth_gran. The supported range for the MiBps
bandwidth is 0 to U32_MAX.
There are two issues with parsing of MiBps memory bandwidth:
* The user provided MiBps is mistakenly rounded up to the granularity
that is unique to percentage input.
* The user provided MiBps is parsed using unsigned long (thus accepting
values up to ULONG_MAX), and then assigned to u32 that could result in
overflow.
Do not round up the MiBps value and parse user provided bandwidth as the u32
it is intended to be. Use the appropriate kstrtou32() that can detect out of
range values.
Fixes: 8205a078ba ("x86/intel_rdt/mba_sc: Add schemata support")
Fixes: 6ce1560d35 ("x86/resctrl: Switch over to the resctrl mbps_val list")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Martin Kletzander <nert.pinx@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
