The eviction process can get into a race condition between the eviction
fence suspend work (which replaces the old fence with new) and kms_close
(which destroys the fence and doesn't expect a new one).
This patch:
- adds a flag to indicate that fd is closing, so fence replacement is
not required (evf_mgr->fd_closing)
- adds a flush_work() during the ev_fence_destroy routine
V2: Addressed review comments from Christian:
- Do not use mutex to sync
- Use flush_work and wait for suspend_work to be done
V3: Fixed state machine for queue->active, which adds into race between
suspend/resume and queue ops
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for userqueue resume. What it typically does is
this:
- adds a new delayed work for resuming all the queues.
- schedules this delayed work from the suspend work.
- validates the BOs and replaces the eviction fence before resuming all
the queues running under this instance of userq manager.
V2: Addressed Christian's review comments:
- declare local variables like ret at the bottom.
- lock all the object first, then start attaching the new fence.
- dont replace old eviction fence, just attach new eviction fence.
- no error logs for drm_exec_lock failures
- no need to reserve bos after drm_exec_locked
- schedule the resume worker immediately (not after 100 ms)
- check for NULL BO (Arvind)
V5: Rebased wrt changes in suspend patch
- moved amdgpu_userqueue_validate_vm_bo in this patch
- initialized ret in resume_all
V6: Rebase
V7: Addressed review comments from Christian
- Do not use list_for_each_safe() with vm->invalidated, its not
correct way
V8: Fixed the race condition between suspend/close/fence
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds suspend support for gfx userqueues. It typically does
the following:
- adds an enable_signaling function for the eviction fence, so that it
can trigger the userqueue suspend,
- adds a delayed work to handle suspending of the eviction_fence
- adds a suspend function to handle suspending of userqueues which
suspends all the queues under this userq manager and signals the
eviction fence,
- adds a function to replace the old eviction fence with a new one and
attach it to each of the objects,
- adds reference of userq manager in the eviction fence container so
that it can be used in the suspend function.
V2: Addressed Christian's review comments:
- schedule suspend work immediately
V4: Addressed Christian's review comments:
- wait for pending uq fences before starting suspend, added
queue->last_fence for the same
- accommodate ev_fence_mgr into existing code
- some bug fixes and NULL checks
V5: Addressed Christian's review comments (gitlab)
- Wait for eviction fence to get signaled in destroy,
don't signal it
- Wait for eviction fence to get signaled in replace fence,
don't signal it
V6: Addressed Christian's review comments
- Do not destroy the old eviction fence until we have it replaced
- Change the sequence of fence replacement sub-tasks
- reusing the ev_fence delayed work for userqueue suspend as well
(Shashank).
V7: Addressed Christian's review comments
- give evf_mgr as argument (instead of fpriv) to replace_fence()
- save ptr to evf_mgr in ev_fence (instead of uq_mgr)
- modify suspend_all_queues logic to reflect error properly
- remove the garbage drm_exec_lock section in wait_for_signal
- grab the userqueue mutex before starting the wait for fence
- remove the unrelated gobj check from signal_ioctl
V8: Added race condition fixes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds basic eviction fence framework for the gfx buffers.
The idea is to:
- One eviction fence is created per gfx process, at kms_open.
- This fence is attached to all the gem buffers created
by this process.
- This fence is detached to all the gem buffers at postclose_kms.
This framework will be further used for usermode queues.
V2: Addressed review comments from Christian
- keep fence_ctx and fence_seq directly in fpriv
- evcition_fence should be dynamically allocated
- do not save eviction fence instance in BO, there could be many
such fences attached to one BO
- use dma_resv_replace_fence() in detach
V3: Addressed review comments from Christian
- eviction fence create and destroy functions should be called
only once from fpriv create/destroy
- use dma_fence_put() in eviction_fence_destroy
V4: Addressed review comments from Christian:
- create a separate ev_fence_mgr structure
- cleanup fence init part
- do not add a domain for fence owner KGD
V5: Addressed review comments from Christian:
- drop the dma_fence_is_signaled check
- use a local variable to access evf_mgr->ev_fence under the
spin_lock() multiple places
- remove the vm->is_compute_ctx check to attach gfx eviction fence,
in gem_object_open
V6: Addressed review comments from Christian:
- drop the return value from eviction_fence_signal
- reserve_fence should be the first thing inside the
attach_eviction_fence function, also keep the resv_add_fence inside
the lock
- remove the unwanted ev_fence check inside detach function
- fix wrong variable check in eviction_fence_init function
- return the error value of eviction_fence_init to the caller, dont
keep it void.
- fail gem_object_open if attaching of eviction_fence fails
- detach the eviction fence only when amdgpu_vm_is_bo_always_valid
is not true.
V7: Addressed review comments from Christian:
- Do not add a uq_mgr ptr in ev_fence, rather add evf_mgr
V8: Move eviction fence enabling into separate patch for CI
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add argument description for the input argument
gpu_addr for amdgpu_seq64_alloc.
Fixes the warning raised by the compiler:
drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c:168:
warning: Function parameter or struct member 'gpu_addr' not described in 'amdgpu_seq64_alloc
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new subquery (AMDGPU_INFO_UQ_FW_AREAS) in
AMDGPU_INFO_IOCTL to get the size and alignment of shadow
and csa objects from the FW setup. This information is
required for the userqueue consumers.
V2: Added Alex's suggestions and addressed review comments:
- make this query IP specific (GFX/SDMA etc)
- give a better title (AMDGPU_INFO_UQ_METADATA)
- restructured the code as per sample code shared by Alex
V3: Split the UAPI patch from shadow_size_fn modifications
V4: Addressed review comments from UAPI review (Marek/Pierre-Eric)
- Change the query name to AMDGPU_INFO_UQ_FW_AREAS
- remove unused inpur parameter for AMDGPU_HW_IP*
UAPI link: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/400/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the shadow FW space size and alignment information is
protected under a flag (adev->gfx.cp_gfx_shadow) which gets set
only in case of SRIOV setups.
if (amdgpu_sriov_vf(adev))
adev->gfx.cp_gfx_shadow = true;
But we need this information for GFX Userqueues, so that user can
create these objects while creating userqueue. This patch series
creates a method to get this information bypassing the dependency
on this check.
This patch:
- adds a new input parameter flag to the gfx.funcs->get_gfx_shadow_info
fptr definition, so that it can accommodate the information without the
check (adev->gfx.cp_gfx_shadow) on request.
- updates the existing definition of amdgpu_gfx_get_gfx_shadow_info to
adjust with this new flag.
Next patch in the series is adding a UAPI which will consume this info.
V2: split this patch from the new UAPI patch
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes some of the pending UAPI review comments
from the libDRM/UAPI review process.
- It updates some outdated comments in the userqueue UAPI header
highlighted during the libdrm UAPI review.
- It removes the GDS BO support which was found unused.
- It also removes the unused flags parameter from the UAPI.
- It also adds a padding variables in userqueue in/out structures.
(Pierre-Eric and Marek)
- clarify comments on top of drm_amdgpu_userq_in
- clarify comment for queue_id (in)
- clarify comment for mqd
- clarify comment for compute MQD size
- clarify comment for queue_id (out)
- remove GDB object from BO object list
- remove the unused flags parameter
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds input fences to VM_IOCTL for buffer object.
The kernel will map/unmap the BO only when the fence is signaled.
The UAPI for the same has been approved here:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
V2: Bug fix (Arvind)
V3: Bug fix (Arvind)
V4: Rename UAPI objects as per UAPI review (Marek)
V5: Addressed review comemnts from Christian
- function should return error.
- Add 'TODO' comment
- The input fence should be independent of the operation.
V6: Addressed review comemnts from Christian
- Release the memory allocated by memdup_user().
V7: Addressed review comemnts from Christian
- Drop the debug print and add "return r;" for the error handling.
V11: Rebase
v12: Fix 32-bit holes issue in sturct drm_amdgpu_gem_va.
v13: Fix deadlock issue.
v14: Fix merge conflict.
v15: Fix review comment by renaming syncobj handles.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the user queue fence signal and wait IOCTLs in the
kernel config CONFIG_DRM_AMDGPU_NAVI3X_USERQ.
v2(Christian):
- Remove the userq specific config added for kernel queues fence init
function.
v3(Alex):
- It will be better to return an error(-ENOTSUPP) in these cases.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop AMDGPU_USERQ_BO_WRITE as this should not be a global option
of the IOCTL, It should be option per buffer. Hence adding separate
array for read and write BO handles.
v2(Marek):
- Internal kernel details shouldn't be here. This file should only
document the observed behavior, not the implementation .
v3:
- Fix DAL CI clang issue.
v4:
- Added Alex RB to merge the kernel UAPI changes since he has
already approved the amdgpu_drm.h changes.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Suggested-by: Marek Olšák <marek.olsak@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a vm root BO lock before accessing the userqueue VM.
v1:(Christian)
- Keep the VM locked until you are done with the mapping.
- Grab a temporary BO reference, drop the VM lock and acquire the BO.
When you are done with everything just drop the BO lock and
then the temporary BO reference.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Few optimization and fixes for userq fence driver.
v1:(Christian):
- Remove unnecessary comments.
- In drm_exec_init call give num_bo_handles as last parameter it would
making allocation of the array more efficient
- Handle return value of __xa_store() and improve the error handling of
amdgpu_userq_fence_driver_alloc().
v2:(Christian):
- Revert userq_xa xarray init to XA_FLAGS_LOCK_IRQ.
- move the xa_unlock before the error check of the call xa_err(__xa_store())
and moved this change to a separate patch as this is adding a missing error
handling.
- Removed the unnecessary comments.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove MES self test as this conflicts the userqueue fence
interrupts.
v2:(Christian)
- remove the amdgpu_mes_self_test() function and any now unused code.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the VM_IOCTL to allow userspace to synchronize
the mapping/unmapping of a BO in the page table.
The major changes are:
- it adds a drm_timeline object as an input parameter to the VM IOCTL.
- this object is used by the kernel to sync the update of the BO in
the page table during the mapping of the object.
- the kernel also synchronizes the tlb flush of the page table entry of
this object during the unmapping (Added in this series:
https://patchwork.freedesktop.org/series/131276/ and
https://patchwork.freedesktop.org/patch/584182/)
- the userspace can wait on this timeline, and then the BO is ready to
be consumed by the GPU.
The UAPI for the same has been approved here:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
V2:
- remove the eviction fence coupling
V3:
- added the drm timeline support instead of input/output fence
(Christian)
V4:
- made timeline 64-bit (Christian)
- bug fix (Arvind)
V5: GLCTS bug fix (Arvind)
V6: Rename syncobj_handle -> timeline_syncobj_out
Rename point -> timeline_point_in (Marek)
V7: Addressed review comments from Christian:
- do not send last_update fence in case of vm_clear_freed, instead
return the fence from gen_va_update_vm
- move the functions to update bo_mapping to amdgpu_gem.c
- do not use amdgpu_userq_update_vm anymore in userq_create()
V8: Addressed review comments from Christian:
- Split amdgpu_gem_update_bo_mapping function.
- amdgpu_gem_va_update_vm should return stub for error.
V9: Addressed review comments from Christian:
- Rename the function amdgpu_gem_update_timeline_node.
- amdgpu_gem_update_timeline_node should be void function.
- when timeline_point is zero don't allocate a chain and
call drm_syncobj_replace_fence() instead of
drm_syncobj_add_point().
V11: rebase
V12: Fix 32-bit holes issue in sturct drm_amdgpu_gem_va.
V13: Fix the review comment by renaming timeline syncobj (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to handle the userqueue protected fence signal hardware
interrupt.
Create a xarray which maps the doorbell index to the fence driver address.
This would help to retrieve the fence driver information when an userq fence
interrupt is triggered. Firmware sends the doorbell offset value and
this info is compared with the queue's mqd doorbell offset value.
If they are same, we process the userq fence interrupt.
v1:(Christian):
- use xa_load to extract the fence driver.
- move the amdgpu_userq_fence_driver_process call within the xa_lock
as there is a chance that fence_drv might be freed.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add user fence wait IOCTL timeline syncobj support.
v2:(Christian)
- handle dma_fence_wait() return value.
- shorten the variable name syncobj_timeline_points a bit.
- move num_points up to avoid padding issues.
v3:(Christian)
- Handle timeline drm_syncobj_find_fence() call error
handling
- Use dma_fence_unwrap_for_each() in timeline fence as
there could be more than one fence.
v4:(Christian)
- Drop the first num_fences since fence is always included in
the dma_fence_unwrap_for_each() iteration, when fence != f
then fence is most likely just a container.
v5: Added Alex RB to merge the kernel UAPI changes since he has
already approved the amdgpu_drm.h changes.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new IOCTL for userqueue secure semaphore.
The signal IOCTL called from userspace application creates a drm
syncobj and array of bo GEM handles and passed in as parameter to
the driver to install the fence into it.
The wait IOCTL gets an array of drm syncobjs, finds the fences
attached to the drm syncobjs and obtain the array of
memory_address/fence_value combintion which are returned to
userspace.
v2: (Christian)
- Install fence into GEM BO object.
- Lock all BO's using the dma resv subsystem
- Reorder the sequence in signal IOCTL function.
- Get write pointer from the shadow wptr
- use userq_fence to fetch the va/value in wait IOCTL.
v3: (Christian)
- Use drm_exec helper for the proper BO drm reserve and avoid BO
lock/unlock issues.
- fence/fence driver reference count logic for signal/wait IOCTLs.
v4: (Christian)
- Fixed the drm_exec calling sequence
- use dma_resv_for_each_fence_unlock if BO's are not locked
- Modified the fence_info array storing logic.
v5: (Christian)
- Keep fence_drv until wait queue execution.
- Add dma_fence_wait for other fences.
- Lock BO's using drm_exec as the number of fences in them could
change.
- Install signaled fences as well into BO/Syncobj.
- Move Syncobj fence installation code after the drm_exec_prepare_array.
- Directly add dma_resv_usage_rw(args->bo_flags....
- remove unnecessary dma_fence_put.
v6: (Christian)
- Add xarray stuff to store the fence_drv
- Implement a function to iterate over the xarray and drop
the fence_drv references.
- Add drm_exec_until_all_locked() wrapper
- Add a check that if we haven't exceeded the user allocated num_fences
before adding dma_fence to the fences array.
v7: (Christian)
- Use memdup_user() for kmalloc_array + copy_from_user
- Move the fence_drv references from the xarray into the newly created fence
and drop the fence_drv references when we signal this fence.
- Move this locking of BOs before the "if (!wait_info->num_fences)",
this way you need this code block only once.
- Merge the error handling code and the cleanup + return 0 code.
- Initializing the xa should probably be done in the userq code.
- Remove the userq back pointer stored in fence_drv.
- Pass xarray as parameter in amdgpu_userq_walk_and_drop_fence_drv()
v8: (Christian)
- Move fence_drv references must come before adding the fence to the list.
- Use xa_lock_irqsave_nested for nested spinlock operations.
- userq_mgr should be per fpriv and not one per device.
- Restructure the interrupt process code for the early exit of the loop.
- The reference acquired in the syncobj fence replace code needs to be
kept around.
- Modify the dma_fence acquire placement in wait IOCTL.
- Move USERQ_BO_WRITE flag to UAPI header file.
- drop the fence drv reference after telling the hw to stop accessing it.
- Add multi sync object support to userq signal IOCTL.
V9: (Christian)
- Store all the fence_drv ref to other drivers and not ourself.
- Remove the userq fence xa implementation and replace with
kvmalloc_array.
v10: (Christian)
- Add a comment for the userq_xa xarray
- drop the if check of userq_fence->fence_drv_array
- use the i variable to initialize userq_fence->fence_drv_array_count
- drop the fence reference before you free the array in the error handling,
otherwise it could be that some references leaked.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Screen freeze and userq fence driver crash while playing Xonotic
v2: (Christian)
- There is change that fence might signal in between testing
and grabbing the lock. Hence we can move the lock above the
if..else check and use the dma_fence_is_signaled_locked().
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a field in struct v11_gfx_mqd for userqueue
fence address.
- Assign fence gpu VA address to the userqueue mqd
fence address fields.
v2: Remove the mask and replace with lower_32_bits (Christian)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Developed a userqueue fence driver for the userqueue process shared
BO synchronization.
Create a dma fence having write pointer as the seqno and allocate a
seq64 memory for each user queue process and feed this memory address
into the firmware/hardware, thus the firmware writes the read pointer
into the given address when the process completes it execution.
Compare wptr and rptr, if rptr >= wptr, signal the fences for the waiting
process to consume the buffers.
v2: Worked on review comments from Christian for the following
modifications
- Add wptr as sequence number into the fence
- Add a reference count for the fence driver
- Add dma_fence_put below the list_del as it might
frees the userq fence.
- Trim unnecessary code in interrupt handler.
- Check dma fence signaled state in dma fence creation
function for a potential problem of hardware completing
the job processing beforehand.
- Add necessary locks.
- Create a list and process all the unsignaled fences.
- clean up fences in destroy function.
- implement .signaled callback function
v3: Worked on review comments from Christian
- Modify naming convention for reference counted objects
- Fix fence driver reference drop issue
- Drop amdgpu_userq_fence_driver_process() function return value
v4: Worked on review comments from Christian
- Moved fence driver allocation into amdgpu_userq_fence_driver_alloc()
- Added detail doc mentioning the differences b/w
two spinlocks declared.
v5: Worked on review comments from Christian
- Check before upcast and remove local variable
- Add error handling in fence_drv alloc function.
- Move rptr read fn outside of the loop and remove WARN_ON in
destroy function.
v6:
- clear the seq64 memory in user fence driver(Christian)
- fix for the wptr va bo mapping(Christian)
- move the fence_drv xa entry erase code from the interrupt handler
into user fence destroy function
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a kernel config option "CONFIG_DRM_AMDGPU_NAVI3X_USERQ"
- moves the usequeue initialization code for all IPs under
this flag
- cover the core userqueue functions under this config
- adds stub function for userqueue ioctl.
so that the userqueue works only when the config is enabled.
V9: Introduce this patch
V10: Call it CONFIG_DRM_AMDGPU_NAVI3X_USERQ instead of
CONFIG_DRM_AMDGPU_USERQ_GFX (Christian)
V11: Add GFX in the config help description message.
V12: Add depends on BROKEN for this config, remove this when the rest of
the code is available.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current MES GFX mask prevents FW to enable oversubscription. This patch
does the following:
- Fixes the mask values and adds a description for the same
- Removes the central mask setup and makes it IP specific, as it would
be different when the number of pipes and queues are different.
v2: squash in fix from Shashank
Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch does the necessary changes required to
enable compute workload support using the existing
usermode queues infrastructure.
V9: Patch introduced
V10: Add custom IP specific mqd strcuture for compute (Alex)
V11: Rename drm_amdgpu_userq_mqd_compute_gfx_v11 to
drm_amdgpu_userq_mqd_compute_gfx11 (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables GFX-v11 IP support in the usermode queue base
code. It typically:
- adds a GFX_v11 specific MQD structure
- sets IP functions to create and destroy MQDs
- sets MQD objects coming from userspace
V10: introduced this spearate patch for GFX V11 enabling (Alex).
V11: Addressed review comments:
- update the comments in GFX mqd structure informing user about using
the INFO IOCTL for object sizes (Alex)
- rename struct drm_amdgpu_userq_mqd_gfx_v11 to
drm_amdgpu_userq_mqd_gfx11 (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The userspace sends us the doorbell object and the relative doobell
index in the object to be used for the usermode queue, but the FW
expects the absolute doorbell index on the PCI BAR in the MQD. This
patch adds a function to convert this relative doorbell index to
absolute doorbell index.
V5: Fix the db object reference leak (Christian)
V6: Pin the doorbell bo in userqueue_create() function, and unpin it
in userqueue destoy (Christian)
V7: Added missing kfree for queue in error cases
Added Alex's R-B
V8: Rebase
V9: Changed the function names from gfx_v11* to mes_v11*
V10: Rebase
V11: Rebase
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support oversubscription, MES FW expects WPTR BOs to
be mapped into GART, before they are submitted to usermode
queues. This patch adds a function for the same.
V4: fix the wptr value before mapping lookup (Bas, Christian).
V5: Addressed review comments from Christian:
- Either pin object or allocate from GART, but not both.
- All the handling must be done with the VM locks held.
V7: Addressed review comments from Christian:
- Do not take vm->eviction_lock
- Use amdgpu_bo_gpu_offset to get the wptr_bo GPU offset
V8: Rebase
V9: Changed the function names from gfx_v11* to mes_v11*
V10: Remove unused adev (Harish)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new functions to map/unmap a usermode queue into
the FW, using the MES ring. As soon as this mapping is done, the
queue would be considered ready to accept the workload.
V1: Addressed review comments from Alex on the RFC patch series
- Map/Unmap should be IP specific.
V2:
Addressed review comments from Christian:
- Fix the wptr_mc_addr calculation (moved into another patch)
Addressed review comments from Alex:
- Do not add fptrs for map/unmap
V3: Integration with doorbell manager
V4: Rebase
V5: Use gfx_v11_0 for function names (Alex)
V6: Removed queue->proc/gang/fw_ctx_address variables and doing the
address calculations locally to keep the queue structure GEN
independent (Alex)
V7: Added R-B from Alex
V8: Rebase
V9: Rebase
V10: Rebase
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES FW expects us to allocate at least one page as context
space to process gang and process related context data. This
patch creates a joint object for the same, and calculates GPU
space offsets of these spaces.
V1: Addressed review comments on RFC patch:
Alex: Make this function IP specific
V2: Addressed review comments from Christian
- Allocate only one object for total FW space, and calculate
offsets for each of these objects.
V3: Integration with doorbell manager
V4: Review comments:
- Remove shadow from FW space list from cover letter (Alex)
- Alignment of macro (Luben)
V5: Merged patches 5 and 6 into this single patch
Addressed review comments:
- Use lower_32_bits instead of mask (Christian)
- gfx_v11_0 instead of gfx_v11 in function names (Alex)
- Shadow and GDS objects are now coming from userspace (Christian,
Alex)
V6:
- Add a comment to replace amdgpu_bo_create_kernel() with
amdgpu_bo_create() during fw_ctx object creation (Christian).
- Move proc_ctx_gpu_addr, gang_ctx_gpu_addr and fw_ctx_gpu_addr out
of generic queue structure and make it gen11 specific (Alex).
V7:
- Using helper function to create/destroy userqueue objects.
- Removed FW object space allocation.
V8:
- Updating FW object address from user values.
V9:
- uppdated function name from gfx_v11_* to mes_v11_*
V10:
- making this patch independent of IP based changes, moving any
GFX object related changes in GFX specific patch (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A Memory queue descriptor (MQD) of a userqueue defines it in
the hw's context. As MQD format can vary between different
graphics IPs, we need gfx GEN specific handlers to create MQDs.
This patch:
- Adds a new file which will be used for MES based userqueue
functions targeting GFX and SDMA IP.
- Introduces MQD handler functions for the usermode queues.
V1: Worked on review comments from Alex:
- Make MQD functions GEN and IP specific
V2: Worked on review comments from Alex:
- Reuse the existing adev->mqd[ip] for MQD creation
- Formatting and arrangement of code
V3:
- Integration with doorbell manager
V4: Review comments addressed:
- Do not create a new file for userq, reuse gfx_v11_0.c (Alex)
- Align name of structure members (Luben)
- Don't break up the Cc tag list and the Sob tag list in commit
message (Luben)
V5:
- No need to reserve the bo for MQD (Christian).
- Some more changes to support IP specific MQD creation.
V6:
- Add a comment reminding us to replace the amdgpu_bo_create_kernel()
calls while creating MQD object to amdgpu_bo_create() once eviction
fences are ready (Christian).
V7:
- Re-arrange userqueue functions in adev instead of uq_mgr (Alex)
- Use memdup_user instead of copy_from_user (Christian)
V9:
- Moved userqueue code from gfx_v11_0.c to new file mes_v11_0.c so
that it can be reused for SDMA userqueues as well (Shashank, Alex)
V10: Addressed review comments from Alex
- Making this patch independent of IP engine(GFX/SDMA/Compute) and
specific to MES V11 only, using the generic MQD structure.
- Splitting a spearate patch to enabling GFX support from here.
- Verify mqd va address to be non-NULL.
- Add a separate header file.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces amdgpu_userqueue_object and its helper
functions to creates and destroy this object. The helper
functions creates/destroys a base amdgpu_bo, kmap/unmap it and
save the respective GPU and CPU addresses in the encapsulating
userqueue object.
These helpers will be used to create/destroy userqueue MQD, WPTR
and FW areas.
V7:
- Forked out this new patch from V11-gfx-userqueue patch to prevent
that patch from growing very big.
- Using amdgpu_bo_create instead of amdgpu_bo_create_kernel in prep
for eviction fences (Christian)
V9:
- Rebase
V10:
- Added Alex's R-B
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds:
- A new IOCTL function to create and destroy
- A new structure to keep all the user queue data in one place.
- A function to generate unique index for the queue.
V1: Worked on review comments from RFC patch series:
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2: Worked on review comments:
- Christian:
- Formatting of text
- There is no need for queuing of userqueues, with idr in place
- Alex:
- Remove use_doorbell, its unnecessary
- Reuse amdgpu_mqd_props for saving mqd fields
- Code formatting and re-arrangement
V3:
- Integration with doorbell manager
V4:
- Accommodate MQD union related changes in UAPI (Alex)
- Do not set the queue size twice (Bas)
V5:
- Remove wrapper functions for queue indexing (Christian)
- Do not save the queue id/idr in queue itself (Christian)
- Move the idr allocation in the IP independent generic space
(Christian)
V6:
- Check the validity of input IP type (Christian)
V7:
- Move uq_func from uq_mgr to adev (Alex)
- Add missing free(queue) for error cases (Yifan)
V9:
- Rebase
V10: Addressed review comments from Christian, and added R-B:
- Do not initialize the local variable
- Convert DRM_ERROR to DEBUG.
V11:
- check the input flags to be zero (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds IP independent skeleton code for amdgpu
usermode queue. It contains:
- A new files with init functions of usermode queues.
- A queue context manager in driver private data.
V1: Worked on design review comments from RFC patch series:
(https://patchwork.freedesktop.org/series/112214/)
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2:
- Reformatted code, split the big patch into two
V3:
- Integration with doorbell manager
V4:
- Align the structure member names to the largest member's column
(Luben)
- Added SPDX license (Luben)
V5:
- Do not add amdgpu.h in amdgpu_userqueue.h (Christian).
- Move struct amdgpu_userq_mgr into amdgpu_userqueue.h (Christian).
V6: Rebase
V9: Rebase
V10: Rebase + Alex's R-B
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a valid header is not found during RAS eeprom init, consider it as
new and reset RAS table info.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs query RAS error counts directly from host with
AMDGPU_RAS_VIRT_ERROR_COUNT_QUERY. When ACA is enabled,
an unusable aca_sysfs is created rather than amdgpu_ras_sysfs_create()
Likewise, VFs depend on host support to query CPERs, rather than ACA component.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
