Summary:
* Optimize custom brightness curve
* Correct SSC enable detection for DCN351
* Turn off eDP lcdvdd and backlight if not required
* Use DMUB Fused IO interface for HDCP
* Extend eDP-on-DP1 quirk list
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix was previously in 25.20 but was reverted out as it was accompanied
by other changes that caused regression.
[why&how]
Disabling dtb as the dto src during dpms off relies on in the same
instance being able to also alter the dto src bit to dpref (or not dtb
in general), but this was recently changed to only take place in
dcn31_program_pix_clk, as that is where we want to perform any dto src
changes because tg is off at that point, it is unsafe to do that
elsewhere. What this means is now instead of disabling dtb as dto src
and modifying source bit, we are left with the configuration for a given
tg that specifies dtb as dto src and dtb dto en simultaneously is unset.
dcn31_program_pix_clk can rectify this but its possible for us to
perform some tg dependant operation that would simply hang because when
we go to enable say crtc then, the clk we specify as dto src is "off" en
bit is cleared, source bit was never changed, and program_pix_clk hasnt
been called yet (as apart of dpms on)
We cant disable it as dto src during dpms off if we want the luxury of
performing tg dependant operation during dpms off and before dpms on.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
It is possible for an update to acquire otg lock and begin programming
while the previous update has not completed and its values have not
latched. The correct way to go about this is to wait until the vupdate
pulses so we can be sure that previous updates have latched and we can
continue with the current update pipe programming, otherwise during
consecutive full updates we will have corruption flash on the screen.
The corruption flash occurs specifically on configs that require odm
combine, and its local to a specific pipe (will not flash across whole
screen). This ticket is across the otg slave, but it may also appear
across master.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A variety of the 3DLUT handling functions check
`debug.enable_mem_low_power.bits.cm` both in the caller and function.
This is unnecessary overhead.
[How]
For each of them reduce to just checking just in caller or function.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR support could vary from the panels connected to one GPU versus
another.
[How]
Move PSR support message into amdgpu_dm which has the scope of the
GPU and use that information.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDCP locality check has strict timing requirements, currently broken
due to reliance on msleep which does not guarantee accuracy.
The PR moves the write-poll-read sequence into DMUB using new generic
Fused IO interface, where the timing accuracy is greatly improved.
New flow is enabled using DCN resource capability bit (none for now),
or using a debug flag.
[How]
* Extended mod_hdcp_config with new function for requesting DMUB
to execute a sequence of fused I2C/AUX commands and synchronously
wait until an outbox reply arrives or a timeout expires.
* If the timeout expires, send an abort to DMUB.
* Update HDCP to use the DMUB for locality check if supported.
* Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK.
* Make the first enable new flow regardless of resource capabilities.
* Make the second enable fallback to old SW flow.
* Clean up makefile source file listings for easier updates.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to very small clock register delta between DCN35 and DCN351, clock
spread is being checked on the wrong register for DCN351, causing the
display driver to believe that DPREFCLK downspread to be disabled when
in some stacks it is enabled. This causes the clock values for audio to
be incorrect.
[How]
Both DCN351 and DCN35 use the same clk_mgr, so we modify the DCN35
function that checks for SSC enable to read CLK6 instead of CLK5 when
using DCN351. This allows us to read for DPREFCLK downspread correctly
so the clock can properly compensate when setting values.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Kevin Gao <kevin.gao3@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When BIOS includes a lot of custom brightness data points, walking
the entire list can be time consuming. This is most noticed when
dragging a power slider. The "higher" values are "slower" to drag
around.
[How]
Move custom brightness calculation loop into a static function. Before
starting the loop check the "half way" data point to see how it compares
to the input. If greater than the half way data point use that as the
starting point instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPER read will loop infinitely if an error is encountered and
the more bit is set. Add error checks to break upon failure.
v2: added function pointer checks
Suggested-by: Tony Yi <Tony.Yi@amd.com>
Signed-off-by: Victor Skvortsov <Victor.Skvortsov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below comment warning
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:541:
warning: Function parameter or struct member 'adev'
not described in 'amdgpu_sdma_register_on_reset_callbacks'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "timing" cannot be NULL because it
points to the object "struct dc_crtc_timing".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs on some IP versions are unable to access this register directly.
This register must be programmed before PSP ring is setup,
so use PSP VF mailbox directly. PSP will broadcast the register
value to all VF assigned instances.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the kernel graphics queue pipe reset,and the driver
will fallback to pipe reset when the queue reset fails. However,
the ME FW hasn't fully supported pipe reset yet so disable the
KGQ pipe reset temporarily.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DCN401 uses a different structure to store the VStartup offset used to
calculate the VUpdate position, so adjust the calculations to use this
value.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In the mode validation, mst dsc is considered for bw calculation after
common dsc config is determined. Currently it considered common dsc config
is found if max and min target bpp are non zero which is not accurate. Invalid
max and min target bpp values would not get max_kbps and min_kbps calculated,
leading to falsefully pass a mode that does not have valid dsc parameters
available.
[how]
Use the return value of decide_dsc_bandwidth_range() to determine whether valid
dsc common config is found or not. Prune out modes that do not have valid common
dsc config determined.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Replay need special policy for the scenario Teams,
add a flag to imply apply special policy or not.
[How]
Add a config option intended for future use for video conferencing applications.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This array was initially defined as size 50. There were array overflow
issues so the size was increased to 100. To ensure such issues are
avoided in the future, the size should be set based on the possible
contents instead of an arbitrary value.
[How]
- upper bound, assume every update occurs on max number of pipes
- define array sizes for function parameters, for static analysis
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Mapping of ODM enum is different for DML2.0 vs DML2.1.
Configs using DML2.1 will incorrectly trigger an assert meant for DML2.0.
[How]
Use if/else to seperate logic between DML2.0 and DML2.1.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_6 to fill metrics data
v2: Move exposing caps to separate patch, move smu_v13.0.12 gpu metrics
1.8 usage to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
