Certain SOCs may not need much data from VBIOS. Some data like VBIOS
version used will be missed but it doesn't affect functionality. Add a
flag to make VBIOS image optional.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use bios_release wrapper to release memory allocated for vbios image and
reset the variables.
v2:
Use the same wrapper for clean up in sw_fini (Alex Deucher)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU-B (Display Micro-Controller Unit B) is a display microcontroller
used for shared display functionality with BIOS and for advanced
power saving display features.
Add case to support DCN3.6 as well.
V2: adjust copyright license text
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_gfx_off_ctrl_immediate() when powergating.
There's no need for the delay in gfx off allow. The
powergating is dynamically disabled/enabled as for
RV/PCO on compute queues and allowing gfx off again as
soon the job is submitted improves power savings.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3861
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For amdgpu_get_pp_force_state, amdgpu_get_pp_cur_state already takes
care of device state check. In other cases, values are returned from
driver cached variables and are not dependent on device state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a device supports runtime pm, then pm_runtime_get_if_active returns 0
if a device is not active and 1 if already active. However, if a device
doesn't support runtime pm, the API returns -EINVAL. A device not
supporting runtime pm implies it's not affected by runtime pm and it's
active. Hence no need to get() to increment usage count. Remove < 0
return value check. Also, ignore runpm state to determine active status.
If the device is already in suspend state, disallow access.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap the checks before device access in helper functions and use them
for device access. The generic order of APIs now is to do input argument
validation first and check if device access is allowed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DC_LOG_DEBUG instead of pr_info to match other uses in dc.c.
Fixes: 091e301c2b ("drm/amd/display: Add debug messages for dc_validate_boot_timing()")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_enc_cfg_get_link_enc_used_by_stream() is no longer used after
2021's:
commit 6366b00346 ("drm/amd/display: Maintain consistent mode of
operation during encoder assignment")
which introduces and uses the _current version instead.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_max_support_fbc_buffersize() is unused since 2021's
commit 94f0d0c80c ("drm/amd/display/dc/dce110/dce110_compressor: Remove
unused function 'dce110_get_required_compressed_surfacesize")
removed it's only caller.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hubbub1_toggle_watermark_change_req() last use was removed in 2017 by
commit b8fce2c9d7 ("drm/amd/display: Optimize programming front end")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_clock_requirements_for_state() was added in 2018 by
commit 8ab2180f96 ("drm/amd/display: Add function to fetch clock
requirements")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last user of dc_stream_get_crtc_position() was
mod_freesync_get_v_position() which is removed in a previous
patch in this series.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mod_freesync_get_vmin_vmax() and mod_freesync_get_v_position() were
added in 2017 by
commit 72ada5f769 ("drm/amd/display: FreeSync Auto Sweep Support")
mod_freesync_is_valid_range() was added in 2018 by
commit e80e944608 ("drm/amd/display: add method to check for supported
range")
mod_freesync_get_settings() was added in 2018 by
commit a3e1737ed6 ("drm/amd/display: Implement stats logging")
and
mod_freesync_calc_field_rate_from_timing() was added in 2020 by
commit 49c70ece54 ("drm/amd/display: Change input parameter for
set_drr")
None of these have been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mpc1_is_mpcc_idle() was added in 2017 by
commit feb4a3cd8e ("drm/amd/display: Integrating MPC pseudocode")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG 5.0.1 supports upto 10 rings, however PMFW support for SMU v13.0.6
variants is now limited to 8 per instance. Limit to 8 temporarily to
avoid out of bounds access.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG5_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG2_5_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG2_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG3_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG4_0_5
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG4_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG5_0_1
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add register list and enable devcoredump for JPEG4_0_3
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add devcoredump helper functions that can be reused for all jpeg versions.
V2: (Lijo)
- add amdgpu_jpeg_reg_dump_init() and amdgpu_jpeg_reg_dump_fini()
- use reg_list and reg_count from init() to dump and print registers
- memory allocation and freeing is moved to the init() and fini()
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini()
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Move SPL to a new path
- Request HW cursor on DCN3.2 with SubVP
- Allow reuse of of DCN4x code
- Enable odm 4:1 when debug key is set
- Fix seamless boot sequence
- Support multiple options during psr entry.
- Revert "Exit idle optimizations before attempt to access PHY"
- Fix out-of-bound accesses
- Fixes for mcache programming in DML21
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[HOW]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
